Codelocks CL1005

Codelocks CL1005 Standard Vertical Cabinet Lock User Manual

Model: CL1005

Kirish

Thank you for choosing the Codelocks CL1005 Standard Vertical Cabinet Lock. This keyless digital lock provides secure access for cabinets and lockers. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lock.

Codelocks CL1005 Standard Vertical Cabinet Lock

Image: Codelocks CL1005 Standard Vertical Cabinet Lock. This image displays the front view of the CL1005 lock, showing the keypad and the main body.

Oʻrnatish va oʻrnatish

The CL1005 lock is designed for easy installation and can serve as a quick retrofit for existing cam locks or for new installations on units without a lock. It fits doors up to 1/2 inch (12.7 mm) thick and features a 5/8 inch (15.8 mm) threaded barrel.

Paket tarkibi:

  • CL1005 Lock Body
  • O'rnatish murvatlari
  • O'rnatish shabloni
  • 2 x AAA batareyalar
  • Cam (pre-installed or separate)

O'rnatish bosqichlari:

  1. Eshikni tayyorlang: Use the provided template to mark and drill the necessary holes on the cabinet door. Ensure the door thickness does not exceed 1/2 inch (12.7 mm).
  2. Qulf korpusini joylashtiring: Insert the threaded barrel of the lock body through the prepared hole from the front of the cabinet door.
  3. Xavfsiz qulf tanasi: From the inside of the cabinet, place the mounting plate over the threaded barrel and secure it with the provided nut. Tighten firmly.
  4. Install Cam: Attach the appropriate cam to the back of the lock mechanism using the provided screw. Ensure the cam rotates freely and engages with the cabinet frame when locked.
  5. Batareyalarni o'rnatish: Open the battery compartment cover on the back of the lock. Insert the 2 x AAA batteries, observing the correct polarity (+/-). Close the cover securely.
  6. Sinov operatsiyasi: Before closing the cabinet, test the lock with the default code (refer to the operating instructions for default code and programming).

Foydalanish bo'yicha ko'rsatmalar

The CL1005 lock operates using a user-programmable code. It is powered by 2 x AAA batteries, providing approximately 15,000 openings.

Opening the Lock:

  1. Enter your 4-6 digit user code.
  2. The lock will emit a confirmation tone and the LED will flash green.
  3. Turn the knob to the unlocked position.
  4. Shkaf eshigini oching.

Yopish va qulflash:

  1. Shkaf eshigini yoping.
  2. Turn the knob to the locked position. The lock will automatically engage.

Changing the User Code:

Refer to the specific programming instructions provided with your lock for detailed steps on changing the user code and master code. Generally, this involves entering a programming sequence followed by the new code.

Battery Failure Override:

In case of battery failure, the lock can be temporarily powered using a 9V battery. Locate the two contact points (LEDs) on the front of the lock. Apply the 9V battery across these points (positive to positive, negative to negative). While holding the 9V battery in place, enter the Master Code to open the lock. Replace the internal AAA batteries immediately after gaining access.

Xizmat

Batareyani almashtirish:

When the batteries are low, the lock may emit a warning signal (e.g., multiple beeps or a red LED flash) upon code entry. Replace the 2 x AAA batteries promptly to ensure continuous operation. Always use high-quality alkaline batteries.

  1. Open the battery compartment cover on the back of the lock.
  2. Eski batareyalarni olib tashlang.
  3. Insert new 2 x AAA batteries, ensuring correct polarity.
  4. Batareya bo'limi qopqog'ini mahkam yoping.

Tozalash:

Qulfning tashqi qismini yumshoq, d bilan tozalangamp mato. Abraziv tozalash vositalari, erituvchilar yoki kuchli kimyoviy moddalardan foydalanmang, chunki ular qoplama va elektron qismlarga zarar etkazishi mumkin.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

MuammoMumkin sababYechim
Lock does not respond to code entry.
  • Noto'g'ri kod kiritildi.
  • O'lik yoki past batareyalar.
  • Keypad malfunction.
  • Ensure the correct code is entered.
  • Replace batteries (refer to Maintenance section).
  • Use 9V battery override if necessary.
  • Muammo davom etsa, mijozlarni qo‘llab-quvvatlash xizmatiga murojaat qiling.
Lock opens but does not stay locked.
  • Cam not properly aligned or installed.
  • Obstruction preventing cam engagement.
  • Check cam installation and alignment.
  • Ensure no objects are blocking the cam's movement.
Lock emits warning beeps/flashes.Kam batareya quvvati.Replace the 2 x AAA batteries immediately.

Texnik xususiyatlari

  • Model: CL1005
  • Brend: Codelocks
  • Qulf turi: Keypad, Keyless
  • Maxsus xususiyat: Kalitsiz kirish
  • Quvvat: 2 x AAA batareyalari (birga beriladi)
  • Batareya muddati: Approximately 15,000 openings
  • Eshik qalinligi: 1/2 dyuymgacha (12.7 mm)
  • Barrel hajmi: 5/8 inch (15.8 mm) threaded
  • Olchamlari (U x G x Y): 6 x 2.5 x 1.5 dyuym (152 x 63.5 x 38.1 mm)
  • Og'irligi: 16 untsiya (0.45 kg)
  • Tugatish: Silver Grey (Painted)
  • Tekshirish usuli: teging
  • Uslub: Zamonaviy

Kafolat va qo'llab-quvvatlash

For warranty information, technical support, or further assistance with your Codelocks CL1005, please refer to the official Codelocks websaytga yoki mijozlarga xizmat ko'rsatish bo'limiga murojaat qiling. Xarid kvitansiyasini xaridni tasdiqlovchi hujjat sifatida saqlang.

Codelocks Official Websayt: www.codelocks.com

© 2023 Codelocks. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.