Inventum MK350 Milk Frother

Kirish

Thank you for choosing the Inventum MK350 Milk Frother. This appliance is designed to quickly and efficiently froth milk for various beverages or heat milk to your desired temperature. Please read this manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

Xavfsizlik bo'yicha muhim ko'rsatmalar

• Ishlatishdan oldin barcha ko'rsatmalarni o'qing.
• Do not immerse the frother unit or power base in water or other liquids.
• Jildiga ishonch hosil qilingtagQurilmada ko'rsatilgan e mahalliy tarmoq voltiga to'g'ri keladitage ulanishdan oldin.
• Bu qurilma faqat maishiy foydalanish uchun mo'ljallangan. Ochiq havoda foydalanmang.
• Jihozni har doim barqaror, tekis, issiqqa chidamli yuzaga qo'ying.
• Jihozni shikastlangan shnur yoki vilka bilan yoki jihoz ishlamay qolgan yoki biron-bir tarzda shikastlangandan keyin ishlatmang.
• Qurilmani va uning simini bolalar qo'li etmaydigan joyda saqlang.
• Issiq yuzalarga tegmang. Tutqichlar yoki tugmalardan foydalaning.
• Ishlatilmayotganda va tozalashdan oldin rozetkadan uzing. Ehtiyot qismlarni qo'yish yoki yechishdan va jihozni tozalashdan oldin sovushini kuting.
• Ishlab chiqaruvchi tomonidan tavsiya etilmagan qo'shimchalardan foydalanmang.

Mahsulot tugadiview

Familiarize yourself with the components of your Inventum MK350 Milk Frother.

1-rasm: This image displays the Inventum MK350 Milk Frother from the front, showcasing its stainless steel upper body, black base, handle, and the control panel with indicator lights and power button.

2-rasm: Bir tomoni view of the Inventum MK350 Milk Frother, emphasizing the ergonomic handle and the pouring spout integrated into the stainless steel jug.

3-rasm: A view into the interior of the milk frother, highlighting the non-stick coating and the small central pin where the frothing whisk is attached.

4-rasm: A close-up image of the small, detachable whisk with a spring coil, designed for creating milk foam. This whisk attaches to the central pin inside the frother.

5-rasm: The separate power base for the milk frother, featuring a central connector for the frother unit and a power cord.

Komponentlar:

• Frother Jug: Stainless steel jug with non-stick interior.
• Tutqich: Ergonomic handle for safe pouring.
• Qopqoq: Transparent lid (not explicitly shown but implied for frother).
• Ko'pikli mo'ylov: Detachable whisk with spring coil for frothing.
• Heating Whisk: (If applicable, otherwise use frothing whisk for heating too). The input suggests one whisk for frothing.
• Boshqaruv paneli: Power button and indicator lights for different functions.
• Quvvat bazasi: Cordless 360-degree rotating base with power cord.

Sozlash; o'rnatish

1. Paketdan chiqarish: Carefully remove all packaging materials. Retain packaging for future storage or transport.
2. Dastlabki tozalash: Before first use, clean the frother jug and whisk according to the 'Maintenance and Cleaning' section. Wipe the exterior of the power base with a damp mato.
3. Joylashtirish: Place the power base on a dry, stable, and level surface away from water sources and heat.
4. Ko'pirtirish uchun biriktirma: Insert the frothing whisk onto the central pin inside the frother jug. Ensure it is securely seated.

Foydalanish bo'yicha ko'rsatmalar

The Inventum MK350 offers options for hot frothing, cold frothing, and heating milk.

1. Prepare the Frother: Ensure the frothing whisk is correctly installed inside the jug.
2. Sut qo'shing: Pour cold milk into the frother jug. Observe the internal markings for maximum fill levels:
   • uchun ko'piklanish (hot or cold): Do not exceed the 115 ml belgi.
   • uchun faqat isitish (without frothing): Do not exceed the 240 ml belgi.

   Note: Using full-fat milk typically yields the best frothing results.
3. Quvvat bazasiga joylashtiring: Position the frother jug onto the power base.
4. Funktsiyani tanlang:
   • uchun hot frothing or sutni isitish: Press the power button once. The red indicator light will illuminate, and the frother will begin operation.
   • uchun sovuq ko'piklanish: Press and hold the power button for approximately 2 seconds. The blue indicator light will illuminate, and the frother will begin cold frothing.
5. Operatsiya: The frother will operate for approximately 90 seconds for frothing, or until the milk reaches the optimal temperature for heating, then automatically switch off. The indicator light will turn off.
6. Xizmat qilish: Carefully remove the frother jug from the power base and pour the frothed or heated milk into your beverage.
7. O'zingizni bosing: Allow the frother to cool down for a few minutes between uses to ensure optimal performance and prevent overheating.

Xizmat va tozalash

Regular cleaning ensures the longevity and hygiene of your milk frother. Always unplug the appliance before cleaning.

1. O'chiring va sovuting: Disconnect the power base from the mains outlet and allow the frother jug to cool down completely after use.
2. Ko'pirtirgichni olib tashlang: Carefully remove the frothing whisk from the central pin inside the jug.
3. Clean Frother Jug: The frother jug is Faqat qo'lda yuving. Wash the interior of the jug with warm, soapy water and a soft sponge or cloth. The non-stick coating facilitates easy cleaning. Rinse thoroughly and dry immediately. Do not use abrasive cleaners or scouring pads, as these can damage the non-stick surface.
4. Clean Whisk: Wash the frothing whisk with warm, soapy water. Use a small brush if necessary to clean the spring coil. Rinse and dry thoroughly.
5. Toza tashqi ko'rinish: Wipe the exterior of the frother jug and the power base with a damp mato. Quvvat bazasini suvga botirmang.
6. Saqlash: Once clean and dry, store the frother with the whisk inside the jug, or in a safe place.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your Inventum MK350 Milk Frother, refer to the following common problems and solutions:

• Frother does not start:
  • Quvvat bazasi ishlaydigan elektr rozetkasiga mahkam ulanganligiga ishonch hosil qiling.
  • Verify the frother jug is correctly placed on the power base.
  • Quvvat tugmasini mahkam bosing.
• Milk is not frothing or frothing poorly:
  • Check that the frothing whisk is properly installed on the central pin.
  • Ensure the milk level does not exceed the maximum fill line for frothing (115 ml).
  • Use cold, fresh milk. Full-fat milk generally froths better than low-fat or skim milk.
  • Clean the whisk and the interior of the jug thoroughly, as residue can affect performance.
• Milk is not heating:
  • Ensure the milk level does not exceed the maximum fill line for heating (240 ml).
  • Confirm the correct function (hot frothing/heating) was selected.
  • Allow the appliance to cool down if it has been used multiple times in quick succession, as an overheating protection mechanism might be active.
• Indicator lights are not working:
  • Check power connection and ensure the frother is operating. If the frother is working but lights are off, contact customer support.

If the problem persists after attempting these solutions, please contact Inventum customer support or your retailer.

Texnik xususiyatlari

Kafolat va qo'llab-quvvatlash

For information regarding the warranty period and conditions for your Inventum MK350 Milk Frother, please refer to the warranty card included with your purchase or consult the retailer from whom you purchased the product. For technical support, spare parts, or service inquiries, please contact Inventum customer service directly or visit their official webaloqa ma'lumotlari uchun sayt.