1. Kirish
This manual provides instructions for the installation, operation, and maintenance of your Lepro 12V LED Strip Light. This flexible, non-waterproof LED tape light is designed for indoor decorative and accent lighting applications. Please read this manual thoroughly before installation and use.
2. Xavfsizlik ma'lumotlari
- Quvvat adapteri: A 12V DC power adapter is kiritilmagan and must be purchased separately. Ensure the power adapter's output voltage is exactly 12V. Using a higher voltage adapter will damage the LED strip.
- Wattage: Umumiy vattage of the LED strip (18W for 16.4ft) must not exceed the maximum wattage rating of your power adapter.
- Issiqlik: The LED strip operates at an extremely low heat, making it safe to touch.
- Suvga chidamliligi: Bu mahsulot suv o'tkazmaydigan and intended for indoor use only. Avoid exposure to water or high humidity.
- Ishlov berish: The LED strip is flexible but fragile. Handle with care during installation to prevent tearing or damage to the PCB.
- Kesish: Only cut the LED strip at designated cutting marks (every 3 LEDs) to avoid damaging the circuit.
3. Paket tarkibi
Paketingizda barcha komponentlar mavjudligiga ishonch hosil qiling:
- 1 x Lepro 12V LED Strip Light (16.4 ft)
- Accessories (e.g., connectors, clips - specific accessories may vary, power adapter not included)
Figure 3.1: Package Contents. Note: 12V power supply sold separately.
4. Texnik shartlar
| Xususiyat | Tafsilot |
|---|---|
| Model raqami | 4100057-WW |
| Nur turi | LED Strip Light (SMD 2835) |
| Uzunlik | 16.4 fut (5 metr) |
| Yengil rang | Issiq oq |
| Rang harorati | 3000 Kelvin |
| jildtage | DC 12V |
| Wattage | 18 vatt |
| Yorug'lik oqimi | 1200 lumen |
| LEDlar soni | 300 |
| Dimmable | Yo'q (Xiralashtirilmaydi) |
| Ichki/tashqi makonda foydalanish | Faqat ichki makon |
| Material | Silikon |
| Element og'irligi | 60 gramm (2.12 untsiya) |
Energiya samaradorligi
Figure 4.1: Energy Efficiency Label. For more details, visit eprel.ec.europa.eu/qr/1056793.
5. O'rnatish bo'yicha ko'rsatmalar
5.1 Komponentlar tugadiview
Figure 5.1: LED Strip Light Components. A 12V power supply is required and sold separately.
5.2 O'rnatish bosqichlari
- Sirtni tayyorlang: Ensure the surface where the LED strip will be applied is clean, dry, and smooth. Wipe the surface with a clean cloth to remove any dust or debris.
- O'lchash va kesish (ixtiyoriy): If a shorter length is desired, measure the required length. The LED strip can be cut every 3 LEDs along the designated cutting marks. Use sharp scissors for a clean cut. Note: 2-pin 8mm connectors are not included if you cut the strip.
- Tasmani qo'llang: Peel off the protective backing from the self-adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length.
- Quvvatni ulash: Connect the LED strip to a compatible 12V DC power adapter (not included). Ensure the polarity is correct.
Figure 5.2: Installation Process: Clean surface, peel adhesive, and cut at marks.
6. Foydalanish bo'yicha ko'rsatmalar
Once properly installed and connected to a 12V DC power adapter, the LED strip light will illuminate when the power adapter is plugged into an electrical outlet. This model is xiralashtirilmaydi and does not include a controller. To turn the lights on or off, you must control the power supply directly (e.g., by plugging/unplugging or using a switched outlet).
6.1 Product in Use
6.1-rasm: Masalanample of Warm White LED Strip Light application in a living space.
Figure 6.2: Warm White 3000K LED lighting in a home environment.
6.2 Video ko'rsatish
Video 6.1: Warm White LED Lights Strip for Bedroom. This video demonstrates the appearance of the warm white LED strip lights in a bedroom setting.
7. Xizmat ko'rsatish
- Tozalash: To clean the LED strip, ensure it is unplugged from the power source. Gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the strip in water.
- Ishlov berish: Avoid bending the strip sharply or applying excessive force, as this can damage the internal circuitry.
- Saqlash: If storing the LED strip, roll it loosely on its original reel or a similar circular object to prevent kinks or damage.
8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| LED tasmasi yonmaydi. | Quvvat yo'q, noto'g'ri ovoztage, faulty power adapter, or damaged strip. | Ensure the 12V power adapter is correctly plugged in and functioning. Verify the power adapter output is 12V DC. Check for visible damage to the strip or connections. |
| Portions of the strip are not lighting up. | Damage to a section of the strip, incorrect cutting, or faulty connection. | Inspect the unlit section for physical damage or improper cuts. Ensure any connectors used are secure. |
| Yelim chiziqni ushlab turmayapti. | Surface was not clean or smooth, or adhesive has lost its stickiness. | Clean the surface thoroughly before application. For persistent issues, consider using additional adhesive clips or a stronger double-sided tape (e.g., hot glue as a temporary solution, as mentioned in customer reviews, but be aware of potential damage upon removal). |
9. Kafolat va qo'llab-quvvatlash
9.1 Kafolat haqida ma'lumot
This Lepro LED Strip Light comes with a 2 yillik kafolat from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
9.2 Mijozlarni qo‘llab-quvvatlash
For technical assistance, warranty claims, or any questions regarding your Lepro product, please contact Lepro customer support through the retailer's platform or visit the official Lepro webaloqa ma'lumotlari uchun sayt.