Kidde Pi9010

Kidde Pi9010 Dual Sensor Smoke Alarm

Qo'llanma

1. Xavfsizlik ma'lumotlari

This Kidde Pi9010 Dual Sensor Smoke Alarm is designed to provide early warning of fire. For optimal protection, it combines both ionization and photoelectric sensing technologies to detect both fast-flaming and slow-smoldering fires.

  • Muhim: O'rnatish va ishlatishdan oldin barcha ko'rsatmalarni o'qing.
  • Joylashtirish: Install smoke alarms on every floor of your home, inside each bedroom, and outside sleeping areas.
  • Sinov: Test the alarm weekly to ensure proper function.
  • UL ro'yxati: This dual-sensor smoke alarm is UL listed, ensuring compliance with safety standards.

2. Mahsulot tugadiview

The Kidde Pi9010 is a battery-operated smoke alarm featuring dual sensing technology for comprehensive fire detection. It includes a Hush feature to temporarily silence nuisance alarms and a test/reset button for easy verification of operation.

Asosiy xususiyatlar:

  • Dual Photoelectric and Ionization Sensors
  • 9-Volt Battery Powered (battery included)
  • Hush Feature for Nuisance Alarms
  • Sinov/Qayta tiklash tugmasi
  • Red LED Indicator for operational status
  • Batareya kamligi haqida ogohlantirish

Qutida nima bor:

  • Kidde Pi9010 Dual Sensor Smoke Alarm
  • O'rnatish braketasi
  • O'rnatish uskunasi
  • 9 voltli batareya
  • Foydalanuvchi uchun qo'llanma

3. O'rnatish va o'rnatish

3.1 Batareyani o'rnatish

The Kidde Pi9010 smoke alarm operates on a standard 9-volt battery, which is included. Ensure the battery is correctly installed before mounting the alarm.

  1. Open the battery compartment on the back of the alarm.
  2. Connect the 9-volt battery to the battery clip, ensuring correct polarity.
  3. Batareyani bo'linmaga joylashtiring va qopqog'ini mahkam yoping.
Image showing the back of the Kidde Pi9010 smoke alarm with the battery compartment open and a 9-volt battery being inserted.

Figure 1: Battery installation in the Kidde Pi9010 smoke alarm.

3.2 Signalni o'rnatish

Select a suitable location for your smoke alarm, typically on the ceiling or high on a wall, away from corners and obstructions. Use the provided mounting bracket and hardware.

  1. Attach the mounting bracket to the ceiling or wall using the screws provided.
  2. Signalni o'rnatish kronshteyniga tekislang va joyiga qulflanguncha soat yo'nalishi bo'yicha burang.
  3. Perform an initial test as described in Section 4.1.

4. Foydalanish bo'yicha ko'rsatmalar

4.1 Signalni sinash

Test your smoke alarm weekly to ensure it is functioning correctly.

  1. Press and hold the test/reset button located on the front of the alarm.
  2. The alarm will sound a loud, pulsating horn. Release the button once the horn sounds.
  3. Agar signal chalinmasa, Muammolarni bartaraf etish bo'limiga qarang.

4.2 Hush Feature

The Hush feature temporarily silences the alarm for approximately seven minutes during non-emergency situations, such as cooking fumes.

  1. To activate, press the Hush button when the alarm is sounding due to a nuisance condition.
  2. The alarm will silence, and the red LED will flash every 30-40 seconds to indicate it is in Hush mode.
  3. After approximately seven minutes, the alarm will automatically reset. If smoke is still present, the alarm will sound again.

Video 1: Official Kidde video demonstrating the Dual Photoelectric & Ionization Sensor Smoke Detector. This video provides a visual overview of the product's features and benefits.

5. Xizmat ko'rsatish

5.1 Batareyani almashtirish

The alarm will emit a brief chirp every 30 to 40 seconds for at least seven days when the 9-volt battery needs replacement.

  1. Signalni o'rnatish kronshteynidan chiqarish uchun uni soat miliga teskari tomonga burang.
  2. Open the battery compartment and disconnect the old 9-volt battery.
  3. Connect a new 9-volt battery, ensuring correct polarity, and close the compartment.
  4. Reattach the alarm to the mounting bracket and test its operation.

5.2 Signalizatsiyani tozalash

Clean your smoke alarm regularly to prevent dust and debris from interfering with its operation.

  • Use a soft brush attachment on your vacuum cleaner to gently remove dust from the alarm's cover and vents.
  • Suv, tozalagichlar yoki erituvchilardan foydalanmang, chunki ular jihozga zarar etkazishi mumkin.

6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

MuammoMumkin sababYechim
Signal har 30-40 soniyada jiringlaydiKam batareyaReplace the 9-volt battery (see Section 5.1).
Nuisance alarms (e.g., from cooking)Smoke or steam from non-fire sourcesUse the Hush feature (see Section 4.2). Ventilate the area.
Sinov paytida signal chalinmaydiBattery not installed or dead; unit malfunctionCheck battery installation/replace. If problem persists, replace unit.
Alarm sounds continuously without smokeDust buildup; unit malfunctionClean the alarm (see Section 5.2). If problem persists, replace unit.

7. Texnik shartlar

  • Brend: Bolajon
  • Model raqami: Pi9010 (Manufacturer Part Number: 21026062-N)
  • Quvvat manbai: 9 voltli batareya
  • Sensor turi: Ionization and Photoelectric (Dual Sensor)
  • Signal turi: Ovozli
  • Rang: Oq
  • O'lchamlari: Approximately 5.75 inches (diameter) x 1.8 inches (depth)
  • Ishlash harorati: 40°F (4.4°C) dan 100°F (37.8°C) gacha
  • Namlik darajasi: Nisbiy namlik 10-95%, kondensatsiyalanmaydi
  • Sertifikatlar: UL ro'yxatiga kiritilgan
  • UPC: 047871260621

8. Kafolat va qo'llab-quvvatlash

The Kidde Pi9010 Dual Sensor Smoke Alarm is backed by a 10 yillik cheklangan kafolat. Ushbu kafolat sotib olingan kundan boshlab materiallar va ishlov berishdagi nuqsonlarni qoplaydi.

For complete warranty details, technical support, or assistance with your product, please refer to the full user manual included in the packaging or visit the official Kidde websayt.

Contact your local fire department for additional fire preparedness tips and safety information.

© 2026 Kidde. Barcha huquqlar himoyalangan.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.