Invision HDTV-E
Invision Ultra Slim Tilt aylanadigan televizor devorga o'rnatiladigan kronshteyn (HDTV-E) foydalanish bo'yicha qo'llanma
Model: HDTV-E
Kirish
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.
Paket tarkibi:
- Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
- Mounting Hardware Kit (various screws, anchors, washers)
- High Speed HDMI Cable (1080p 1.4v)
- 6-inch Tri-axis Spirit Level
- Qo'llanma

1-rasm: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.
Xavfsizlik bo'yicha muhim ma'lumotlar
WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty.
- Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and your television.
- Always use a stud finder to locate wood studs or ensure you are mounting into solid concrete/brick.
- Do not exceed the maximum load capacity of 36.2kg (80lbs).
- Ushbu mahsulot faqat bino ichida foydalanish uchun mo'ljallangan.
- Ensure all screws are securely tightened, but do not overtighten.
- O'rnatish vaqtida bolalar va uy hayvonlarini uzoqroq tuting.
- O'rnatish jarayonining biron bir qismiga ishonchingiz komil bo'lmasa, malakali mutaxassis bilan maslahatlashing.
Texnik xususiyatlari
| Xususiyat | Tafsilot |
|---|---|
| Model raqami | HDTV-E |
| Brend | Invision |
| Material | Yuqori sifatli po'lat |
| Rang | Qora |
| Ekran o'lchamining mosligi | 24-55 dyuym |
| VESA muvofiqligi | 100x100mm to 400x400mm (Not suitable for 75x75mm VESA) |
| Maksimal yuk ko'tarish qobiliyati | 36.2 kg (80 funt) |
| Wall Profile (Min-Maks) | 55mm (2.2 inches) to 500mm (19.7 inches) |
| Harakat turi | Tilt, Swivel |
| Maksimal burilish burchagi | 5 dan 8 darajagacha |
| Kiritilgan aksessuarlar | High Speed HDMI Cable, Tri-axis Spirit Level |

2-rasm: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).
O'rnatish va o'rnatish
1. O'rnatishdan oldingi nazorat ro'yxati
- Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
- Devor turi: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
- Kerakli vositalar: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
- Og'irlikni tekshirish: Ensure your TV's weight does not exceed 36.2kg (80lbs).

3-rasm: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.
2. Attaching the TV Brackets to Your Television
- Ekran shikastlanishining oldini olish uchun televizoringizni ehtiyotkorlik bilan yumshoq, toza yuzaga pastga qaratib qo'ying.
- Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
- Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.
3. Mounting the Wall Plate to the Wall
- Determine Mounting Height: Decide on the desired height for the top of your TV. Mark this on the wall.
- Locate Studs (for wood stud walls): Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
- Position Wall Plate: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
- Uchuvchi teshiklarni burg'ulash:
- For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
- For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
- Xavfsiz devor plitasi: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.
4. Hanging the Television
- Yordam bilan televizorni biriktirilgan qavslar bilan ehtiyotkorlik bilan ko'taring.
- Televizor kronshteynlarini devorga o'rnatiladigan plastinkaga mahkamlang. Televizor devorga mahkam o'rnatilganligiga ishonch hosil qiling.
- Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.
Foydalanish bo'yicha ko'rsatmalar
The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.

4-rasm: The mount's design allows for extensive swivel and tilt adjustments, providing optimal viewXonadagi turli pozitsiyalardan burchaklarni aniqlash.
Aylanishni sozlash
Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.
Nishabni sozlash
To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.
Kabel boshqaruvi
The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.

5-rasm: Batafsil view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.
Xizmat
- Doimiy tekshirish: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
- Tozalash: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Moylash: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If you notice any stiffness, contact customer support.
- Og'irlik cheklovi: Never exceed the maximum weight capacity of 36.2kg (80lbs).
Muammolarni bartaraf qilish; nosozliklarni TUZATISH
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| O'rnatishdan keyin televizor tekis emas. | Devor plitasi tekis o'rnatilmagan. | Remove TV, loosen wall plate screws, adjust with spirit level, re-tighten. |
| Tog' beqaror his qilmoqda. | Screws are loose; wall not suitable; weight exceeded. | Check all screws for tightness. Verify wall type and TV weight. If issues persist, consult a professional. |
| Nishabni/aylanishni sozlashda qiyinchilik. | Mechanism might be stiff or overtightened. | Ensure no cables are obstructing movement. Check for any adjustment knobs that might be too tight. Do not force movement. |
| Yo'qolgan qismlar. | Qadoqlash xatosi. | Contact Invision customer support immediately for replacement parts. |
Kafolat haqida ma'lumot
The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a 25 yillik mahsulot kafolati. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For warranty claims or further details, please contact Invision customer support.
Mijozlarni qo‘llab-quvvatlash
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.
Ishlab chiqaruvchi: Invision Technology (UK) Ltd
Global savdo identifikatsiya raqami (GTIN): 05060264551392
Please refer to the product packaging or the official Invision webeng dolzarb aloqa ma'lumotlari uchun sayt.

6-rasm: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.