NVX VUBT2 Universal Waterproof Bluetooth Audio Receiver Instruction Manual

1. Mahsulot tugadiview

The NVX VUBT2 is a universal waterproof Bluetooth 4.0 audio receiver designed to add wireless audio streaming capabilities to various vehicles and vessels, including marine, boats, cars, and ATVs. It features a robust, water-resistant design and provides high-quality stereo audio output.

Asosiy xususiyatlar:

• Bluetooth Profile: A2DP (yuqori sifatli, stereo audio)
• Bluetooth Core Specification: Version 4.0 with aptX
• Chiqishlar: One Stereo Pair, Low-Level RCA Plugs
• Chiqish hajmitage: 2 V RMS
• Signaldan shovqin nisbati: 93 dB (20 Hz - 20 kHz)
• Suvga chidamliligi: IPX67 rated for protection against dust and water immersion.
• Ulanish: 3.5mm audio input/output.
• Masofadan yoqish: Amplifier remote turn-on feature.

2. Xavfsizlik ma'lumotlari

O'rnatish va ishlatishdan oldin barcha ko'rsatmalarni diqqat bilan o'qib chiqing. Ushbu ko'rsatmalarga rioya qilmaslik mahsulotga, mulkka yoki shaxsiy jarohatlarga olib kelishi mumkin.

• Ensure the vehicle's power is disconnected before installation to prevent electrical shorts.
• Use appropriate wiring gauges and fuses as recommended.
• Mount the device securely to prevent movement during operation.
• Do not expose the device to extreme temperatures or direct flame.
• While the device is waterproof (IPX67), ensure all connections are properly sealed and protected from direct water exposure to maintain integrity.

3. Paket tarkibi

Paketingizda barcha narsalar mavjudligini tekshiring:

• NVX VUBT2 Bluetooth Audio Receiver
• Power/Ground/Remote Wiring Harness with In-line Fuse
• RCA audio kabelidan 3.5 mm
• Mounting Hardware (screws or adhesive pads)

Image: The NVX VUBT2 Bluetooth Audio Receiver shown with its power/ground/remote wiring harness, in-line fuse, and 3.5mm to RCA audio cable.

4. O'rnatish va o'rnatish

4.1 Simli ulanishlar

The VUBT2 requires power, ground, and a remote turn-on connection. It outputs audio via RCA connections.

1. Power (Red Wire): Connect the red wire to a switched 12V power source. This can be the accessory wire from your vehicle's ignition or a dedicated switch. The in-line fuse should be installed close to the power source.
2. Ground (Black Wire): Connect the black wire to a solid chassis ground point. Ensure a clean, secure connection for optimal performance.
3. Remote Turn-On (Blue Wire): Connect the blue wire to the remote turn-on input of your amplifier or other audio components. This will power on the VUBT2 when your system is activated.
4. Audio Output (3.5mm to RCA): Connect the 3.5mm jack from the VUBT2 to the included 3.5mm to RCA cable. Then, connect the RCA plugs (red for right, white for left) to the audio input of your ampko'taruvchi yoki bosh birligi.

Image: The NVX VUBT2 Bluetooth receiver wired to an amplifier, demonstrating the remote turn-on and RCA audio connections.

Image: Close-up of the 3.5mm audio output connected to RCA cables, ready for connection to an audio system.

4.2 O'rnatish

The compact design of the VUBT2 allows for flexible mounting options. It can be mounted using screws through its integrated tabs or with adhesive pads (if included).

• Choose a location that is dry, secure, and allows for proper cable routing.
• Ensure the mounting surface is clean and flat if using adhesive.
• The device is IPX67 rated, making it suitable for exposed locations, but protecting connections is still recommended.

Image: The underside of the NVX VUBT2 unit, displaying the 3M adhesive backing for secure mounting in various applications.

5. Foydalanish bo'yicha ko'rsatmalar

5.1 Bluetooth ulanishi

1. Ensure the VUBT2 is powered on (your audio system is active).
2. On your mobile device (smartphone, tablet, etc.), navigate to the Bluetooth settings.
3. Scan for available Bluetooth devices. The VUBT2 will appear as "NVX VUBT2" or similar.
4. Select the VUBT2 to pair. A confirmation tone or LED indicator may signal a successful connection.
5. Once paired, your device will typically reconnect automatically when in range and the VUBT2 is powered on.

5.2 Audio tinglash

After successful pairing, you can stream audio from your mobile device to your connected audio system. Control playback (play/pause, skip tracks, volume) directly from your paired device.

Image: A smartphone screen displaying music controls, illustrating how users can manage audio playback through the NVX VUBT2.

6. Xizmat ko'rsatish

The NVX VUBT2 is designed for durability and minimal maintenance. Follow these guidelines to ensure longevity:

• Tozalash: Yumshoqdan foydalaning, damp cloth to wipe the exterior of the unit. Avoid harsh chemicals or abrasive cleaners.
• Suvga chidamliligi: While IPX67 rated, avoid prolonged submersion or high-pressure water jets directly on the unit or its connections. Regularly inspect wiring and connections for any signs of wear or damage that could compromise water resistance.
• Ulanishlar: Vaqti-vaqti bilan barcha simli ulanishlarni tekshiring, ular xavfsiz va korroziyadan xoli bo'lsin.

Image: The NVX VUBT2 unit covered in water droplets, illustrating its IPX67 water-resistance rating for use in challenging environments.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

8. Texnik shartlar

9. Kafolat haqida ma'lumot

NVX products are designed and manufactured to the highest quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official NVX websayt. Kafolat da'volari uchun xaridingizni tasdiqlovchi hujjatingizni saqlang.

10. Mijozlarni qo'llab-quvvatlash

If you encounter any issues or have questions regarding your NVX VUBT2 Bluetooth Audio Receiver that are not covered in this manual, please contact NVX customer support for assistance.

• Onlayn qo'llab-quvvatlash: Visit the official NVX webTez-tez so'raladigan savollar, qo'llab-quvvatlash manbalari va aloqa ma'lumotlari uchun sayt.
• Sotuvchini qo'llab-quvvatlash: For purchase-related inquiries, contact the seller directly.