Legrand 067001

Legrand 067001 Céliane VMC Switch Instruction Manual

Model: 067001 | Brend: Legrand

1. Kirish

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Legrand 067001 Céliane VMC Switch. This device is designed for controlling Ventilation Mécanique Contrôlée (VMC) systems, operating at 230V with a 10AX current rating.

2. Xavfsizlik ma'lumotlari

WARNING: Risk of electric shock. Installation and maintenance should only be performed by a qualified electrician in accordance with national and local electrical codes.

  • Always disconnect power at the main circuit breaker before installing or servicing the switch.
  • Barcha ulanishlar xavfsiz va to'g'ri izolyatsiya qilinganligiga ishonch hosil qiling.
  • Do not operate the switch with wet hands or in damp sharoitlar.
  • This product is designed for indoor use only (IP20 rating).
  • Belgilangan hajmdan oshmangtage (230V) or current (10A) ratings.

3. Paket tarkibi

  • 1 x Legrand 067001 Céliane VMC Switch Module

Note: Faceplate and mounting frame are typically sold separately and are required for complete installation.

4. O'rnatish va o'rnatish

The Legrand 067001 switch is designed for wall or surface mounting. Proper installation is crucial for safety and functionality.

  1. Quvvatni uzish: O'rnatishni boshlashdan oldin, kontaktlarning zanglashiga olib keladigan asosiy quvvat manbai avtomatik o'chirgichda o'chirilganligiga ishonch hosil qiling. Vol bilan tekshiringtagsinovchi.
  2. O'rnatish: Install the switch module into a compatible mounting box or frame (not included). This switch supports wall or surface mounting configurations.
  3. Simli ulanishlar:
    • Identify the Line (L) and Neutral (N) wires from your electrical supply.
    • Connect the electrical wires to the corresponding terminals on the switch module. The connection type is crimping. Ensure a secure and tight connection for each wire.
    • Refer to the wiring diagram provided with your VMC system or consult a qualified electrician for specific connection requirements.
  4. Modulni himoya qiling: Once wired, secure the switch module within its mounting frame or box.
  5. Faceplate o'rnatish: Attach the decorative faceplate (not included) over the switch module.
  6. Quvvatni tiklash: O'rnatish tugallangandan va barcha komponentlar joyiga mahkam o'rnatilgandan so'ng, asosiy avtomatik o'chirgichdagi quvvatni qayta tiklang.
Legrand 067001 Céliane VMC Switch module, showing internal components and connection terminals.

Image: Legrand 067001 Céliane VMC Switch module. This image displays the grey plastic housing, the internal mechanism, and the terminals for electrical connections, including 'N' for Neutral and 'L' for Line, indicating its wiring points.

5. Foydalanish bo'yicha ko'rsatmalar

The Legrand 067001 is a push-button type switch with an ON-OFF operating mode, designed for controlling VMC systems. It features a call button with a luminous indicator.

  • Yoqish/o'chirish: Press the push-button to toggle the connected VMC system between ON and OFF states.
  • Yorug'lik ko'rsatkichi: The integrated luminous indicator provides visual feedback on the switch's status or can be used as a call button depending on the specific VMC system configuration.

6. Xizmat ko'rsatish

The Legrand 067001 VMC Switch requires minimal maintenance.

  • Tozalash: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the switch or create an electrical hazard.
  • Tekshirish: Periodically inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, disconnect power and consult a qualified electrician.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If the switch or connected VMC system is not functioning correctly, consider the following:

  • Quvvat yo'q: Check if the circuit breaker for the switch is tripped. Reset if necessary.
  • Switch javob bermayapti: Ensure all wiring connections are secure. Loose connections can prevent proper operation.
  • Luminous Indicator Not Working: Verify the wiring for the indicator light is correctly connected according to your VMC system's specifications.
  • Doimiy muammolar: If troubleshooting steps do not resolve the issue, disconnect power and contact a qualified electrician for further assistance. Do not attempt repairs yourself.

8. Texnik shartlar

XususiyatSpetsifikatsiya
Model raqami067001
BrendLegrand
Operatsion jildtage230 volt
Joriy reyting10 A (10AX)
Quvvat reytingi1600 vatt
Ishlash tartibiON-OFF
Kommutator turiBosish tugmasi
Aloqa turiOdatda yopiq
Ulagich turiSiqish
MaterialPlastic (housing), Copper (contact)
O'rnatish turiWall Mount or Surface Mount
IP reytingiIP20
Og'irligi6 gramm
RangKulrang

9. Kafolat va qo'llab-quvvatlash

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Legrand customer service directly. Warranty terms may vary based on region and retailer.

You can find more information on the official Legrand websayt: www.legrand.com

© 2023 Legrand. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.