M-Wave MWAVE CVC1012 Computer 14 F M14W

1. Kirish

The M-Wave M14W is a wired bicycle computer designed to provide essential cycling data. It features 14 functions to help you track your rides effectively. Please read this manual carefully before installation and use to ensure proper function and longevity of your device.

1-rasm: Old view of the M-Wave M14W bicycle computer, showing the display with current speed (37.0 KM/hr) and distance (2.625).

2. Paket tarkibi

Before proceeding with installation, verify that all components are present in the package:

• M-Wave M14W Bicycle Computer Unit
• Wired Sensor and Cable
• O'rnatish braketasi
• G'ildirak magniti
• Cable Ties for securing
• CR2 batareyasi (oldindan o'rnatilgan yoki alohida qo'shilgan)
• Qo'llanma (bu hujjat)

Figure 2: The M-Wave M14W bicycle computer shown in its retail packaging, indicating wireless functionality and 14 functions.

3. O'rnatish va o'rnatish

3.1 Batareyani o'rnatish

The M-Wave M14W uses a CR2 battery. The battery may be pre-installed. If not, or if you need to replace it:

1. Locate the battery compartment on the back of the computer unit.
2. Use a small coin or screwdriver to open the battery cover by twisting it counter-clockwise.
3. CR2 batareyasini musbat (+) tomoni yuqoriga qaratib joylashtiring.
4. Replace the battery cover and twist clockwise to secure it.

3-rasm: orqa view of the M-Wave M14W unit, showing the battery compartment and reset button.

3.2 Mounting the Computer and Sensor

Follow these steps to securely mount the computer and its wired sensor:

1. O'rnatish braketi: Attach the mounting bracket to your handlebar or stem using the provided straps or cable ties. Ensure it is firmly secured and positioned for easy viewing.
2. Sensorni joylashtirish: Mount the wired sensor to the front fork of your bicycle, ensuring it is aligned with the wheel magnet. The sensor should be positioned so that the magnet passes within 5mm of the sensor as the wheel rotates.
3. Magnit o'rnatish: Attach the magnet to a spoke on your front wheel. Adjust its position so it aligns with the sensor.
4. Kabelni yo'naltirish: Route the sensor cable along the fork and frame, securing it with cable ties to prevent it from interfering with moving parts or getting snagged. Plug the cable into the computer unit's port.
5. Computer Attachment: Slide the M14W computer unit onto the mounting bracket until it clicks into place.

3.3 Dastlabki sozlamalar

After installation, you will need to configure the basic settings:

1. Birlik tanlash: ni bosing REJIM button to cycle through settings. When prompted, select your preferred unit of speed (KM/hr or MPH) using the SET button. Confirm with REJIM.
2. Wheel Circumference: This is crucial for accurate speed and distance readings.
   • Refer to your bicycle tire's sidewall for its size (e.g., 700x23C, 26x1.95).
   • Consult a wheel circumference chart (available online or in bicycle shops) to find the corresponding value in millimeters (mm).
   • Enter this value into the computer using the SET button to adjust digits and REJIM keyingi raqamga o'tish uchun.
3. Initial Odometer Setting (Optional): Some models allow setting an initial odometer value. Follow on-screen prompts if this option appears.

4. Foydalanish bo'yicha ko'rsatmalar

The M14W features two primary buttons: SET va REJIM.

• MODE tugmasi: Used to cycle through different display functions (e.g., Speed, Distance, Ride Time, Odometer). In setting mode, it confirms selections or moves to the next setting.
• SET tugmasi: Used to adjust values during setup (e.g., wheel circumference, time). In some modes, it may reset specific trip data.

4.1 Display Functions (14 Functions)

ni bosing REJIM tugmasini bosing view quyidagi funktsiyalar:

4.2 Resetting Trip Data

To reset trip-specific data (Trip Distance, Average Speed, Maximum Speed, Ride Time), typically you will press and hold the SET button for a few seconds while in the relevant display mode. Refer to the on-screen prompts for confirmation.

5. Xizmat ko'rsatish

5.1 Tozalash

Clean the computer unit and sensor regularly with a soft, damp mato. Abrasiv tozalash vositalari yoki erituvchilardan foydalanmang, chunki ular displeyga yoki vasing. The unit has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. Avoid submerging the unit in water.

5.2 Batareyani almashtirish

When the display becomes dim or erratic, it's time to replace the CR2 battery. Follow the steps outlined in Section 3.1. Dispose of old batteries responsibly according to local regulations.

5.3 Saqlash

If storing the bicycle computer for an extended period, it is recommended to remove the battery to prevent leakage and potential damage to the unit.

6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your M-Wave M14W computer, try the following solutions:

7. Texnik shartlar

8. Kafolat va qo'llab-quvvatlash

M-Wave products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official M-Wave website. In case of technical issues or questions not covered in this manual, please contact M-Wave customer support through their official channels.

Figure 4: M-Wave brand logo, "Your World of Cycling".

For more information and product updates, you may visit the official M-Wave websayt: www.m-wave-bike.com