BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light User Manual

Kirish

This manual provides essential information for the safe and effective installation, operation, and maintenance of your BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light. Please read this manual thoroughly before use and retain it for future reference.

Xavfsizlik ma'lumotlari

O'rnatish yoki texnik xizmat ko'rsatishdan oldin elektr ta'minoti uzilganligiga ishonch hosil qiling.
This LED strip is designed for 12V DC power only. Connecting to a higher voltage mahsulotga zarar yetkazadi.
This product is IP30 rated, meaning it is non-waterproof. Avoid exposure to water or high humidity.
Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit board or LEDs.
Ensure proper ventilation around the LED strip to prevent overheating.
Bolalar qo'li etmaydigan joyda saqlang.
Only use the recommended power adapter (DC12V3A) or a compatible power supply.

Paket tarkibi

Barcha komponentlar mavjudligini va yaxshi holatda ekanligini tekshiring:

1 x BTF-LIGHTING 16.4ft (5m) Warm White SMD5630 LED Strip Light
1 x Remote Control (if included with your specific package)
Note: Power adapter is typically sold separately.

Texnik xususiyatlari

Brend	BTF-YORITISH
Model raqami	56305MWW60W30
LED turi	SMD5630
LED miqdori	300 LEDs (60 LEDs/meter)
Chiziq uzunligi	16.4 fut (5 metr)
FPCB Board Width	10 mm
Yengil rang	Issiq oq
Rang harorati	2700K-3000K
Lumen per LED	23-25 lm/LED
Ishchi jildtage	DC 12V
Tavsiya etilgan quvvat adapteri	DC 12V 3A (36W) or higher
Wattage	30 vatt
Suv o'tkazmaydigan daraja	IP30 (Non-Waterproof)
Ishlash harorati	-20 ° C dan 50 ° C gacha
Hayot muddati	> 50,000 XNUMX soat
Sertifikatlar	Idoralar va RoHS

O'rnatish bo'yicha ko'rsatmalar

Sirtni tayyorlang: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can reduce the adhesive's effectiveness.
Rasm: yaqindan view of the LED strip, highlighting individual SMD5630 LEDs and designated cut points marked with a scissor icon. The strip also shows the adhesive backing being peeled.
O'lchash va kesish (ixtiyoriy): If a shorter length is required, cut the LED strip only at the designated cut marks (usually indicated by a scissor icon and copper pads). Cutting elsewhere will damage the circuit and prevent the section from lighting up.
Quvvatni ulash:
- Identify the 2-pin connectors on the LED strip.
- Connect the LED strip's 2-pin connector to a compatible DC 12V power adapter (not included). Ensure polarity is correct (positive to positive, negative to negative).
- If a remote control is included, connect the LED strip to the remote controller, and then connect the controller to the power adapter.
Image: Two separate sections of the LED strip, each terminating with a 2-pin connector (red and black wires), ready for connection to a power source or controller.
Test Before Adhering: Before removing the adhesive backing, plug in the power adapter to test if the LED strip lights up correctly. This allows for troubleshooting before permanent installation.
Stripni yopishtiring: Once tested, peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the desired clean, dry surface. Apply firm, even pressure along the entire length to ensure good adhesion.

Foydalanish bo'yicha ko'rsatmalar

Once the LED strip is properly installed and connected to a 12V DC power supply:

Quvvatni yoqish/oʻchirish: Plug the power adapter into a wall outlet to turn the strip light on. Unplug it to turn it off.
Using the Remote Control (if applicable): If your package included a remote control, refer to its specific instructions for functions such as brightness adjustment or on/off control.

Examples of warm white LED strip lighting in various indoor settings

Rasm: Vizual sobiqamples of LED strip lighting used in different indoor environments, demonstrating the warm white illumination. This image also shows Cool White and Nature White, but this product is Warm White.

Xizmat

Tozalash: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Tekshirish: Periodically check the strip for any signs of damage, loose connections, or adhesive degradation.
Saqlash: If storing the LED strip, ensure it is kept in a dry, cool place, away from direct sunlight and extreme temperatures.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Muammo	Mumkin sabab	Yechim
LED tasmasi yonmaydi.	Adapterga quvvat yo'q. Incorrect power connection (polarity reversed). Noto'g'ri quvvat adapteri. Damaged LED strip. Remote control battery dead or not paired (if applicable).	Devor rozetkasi va quvvat adapterining ulanishini tekshiring. Ensure positive (+) and negative (-) connections are correct. Test with a known working 12V DC power adapter. Inspect the strip for visible damage, especially at cut points. Replace remote battery or re-pair according to remote instructions.
Part of the LED strip is not lighting up.	Damage to a section of the strip. Incorrect cutting.	Inspect the unlit section for physical damage or a broken circuit. Ensure cuts were made only at designated marks. Damaged sections cannot be repaired.
LEDlar xira yoki miltillaydi.	Elektr ta'minoti etarli emas. Bo'shashgan aloqa.	Quvvat adapteri yetarli vat bilan ta'minlanganligiga ishonch hosil qilingtage (minimum 30W for this strip). Barcha ulanishlarning ishonchli o'rnatilishini tekshiring.

Kafolat va qo'llab-quvvatlash

BTF-LIGHTING products are designed for reliability and performance. For warranty information, technical support, or assistance with your product, please contact BTF-LIGHTING customer service through the retailer where the product was purchased or visit the official BTF-LIGHTING websayt.

Please have your model number (56305MWW60W30) and purchase details ready when contacting support.

BTF-LIGHTING 56305MWW60W30