Lepro Industrial LED Desk Lamp

Kirish

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Bu ko'p qirrali lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

O'rnatish va ishlatishdan oldin ushbu qo'llanmani diqqat bilan o'qib chiqing va kelajakda foydalanish uchun saqlab qo'ying.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Xavfsizlik bo'yicha ko'rsatmalar

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Use only E27 base bulbs with a maximum wattage 40 Vt.
• l dan foydalanmangamp shikastlangan elektr shnuri yoki vilkasi bilan.
• This product is intended for indoor use only. Do not expose to water or high humidity.
• l ni saqlangamp Yonuvchan materiallardan uzoqroq joyda.
• Lni qismlarga ajratish yoki ta'mirlashga urinmangamp o'zingiz. Xizmat ko'rsatish uchun malakali xodimlarga murojaat qiling.

Paket tarkibi

Paketda quyidagi elementlar mavjudligini tekshiring:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Foydalanuvchi uchun qo'llanma

Note: The E27 bulb is not included and must be purchased separately.

O'rnatish va o'rnatish

Follow these steps to assemble and install your desk lamp:

1. Cl ni biriktiringamp: Clni ishonchli mahkamlangamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. L ni yig'ingamp Bosh: l ni o'rnatingamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Qo'lni joylashtiring: Ehtiyotkorlik bilan l ni kiritingamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Lampochkani o'rnatish: l ga ishonch hosil qilingamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp socket. Do not overtighten.
5. Quvvatga ulanish: l ni ulangamp's power cord into a suitable electrical outlet.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Rasm: lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Foydalanish bo'yicha ko'rsatmalar

Quvvatni yoqish/oʻchirish: Locate the rocker switch on the power cord. Press the switch to turn the lamp yoqish yoki o'chirish.

Yorug'lik burchagini sozlash: Lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Rasm: lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Xizmat

Tozalash: l tozalash uchunamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Lampochkani almashtirish: Lampochkani almashtirishdan oldin, lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp qaytib kirish.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

• Lamp yoqilmaydi:
  • Elektr shnuri rozetkaga mahkam ulanganligini tekshiring.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Check the power outlet by plugging in another device.
• Nur miltillaydi:
  • Lampochkaning mahkam vidalanganligiga ishonch hosil qiling.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp is unstable:
  • cl ga ishonch hosil qilingamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • l ekanligini tekshiringamp arm is properly inserted into the clamp qo'shma.

Texnik xususiyatlari

Image: Product dimensions and key features like E27 bulb base and power cord length.

Kafolat va qo'llab-quvvatlash

Kafolat: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Mijozlarni qo‘llab-quvvatlash: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.