SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Kirish

Sotib olganingiz uchun tashakkurasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Asosiy xususiyatlar

• One-stop gig solution for classic rock players with all necessary core effects.
• Analog Plexi-style distortion for 80s/90s hard rock tones.
• Analog BBD-style chorus for warm, dreamy soundscapes.
• 500ms analog voice delay and high-quality reverb for expansive, spacy tones.
• Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Qutida nima bor

• SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
• XLR kabeli
• Quvvat adapteri (9V DC)
• Foydalanuvchi uchun qo'llanma

4. O'rnatish bo'yicha ko'rsatmalar

4.1 Quvvatga ulanish

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Ovozli ulanishlar

1. Gitara kiritish: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
2. Chiqish uchun Ampko'targich/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
3. Eshitish vositasi chiqishi: For silent practice, connect headphones to the 'PHONES' jack.

5. Foydalanish bo'yicha ko'rsatmalar

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Effect Modules

• Xor: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
• Rok Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
• Kechikish: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
• Reverb: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activating/Deactivating Effects

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage muhitlar.

5.5 Portativlik

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

6. Texnik shartlar

7. Xizmat ko'rsatish

• Tozalash: Use a soft, dry cloth to clean the pedal. Avoid using abrasive cleaners or solvents.
• Saqlash: Pedalni salqin, quruq joyda, to'g'ridan-to'g'ri quyosh nuri va haddan tashqari haroratdan uzoqroq joyda saqlang.
• Ishlov berish: Pedalni tushirib yubormang yoki kuchli zarbalarga duchor qilmang.
• Quvvat: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

• Ovoz yo'q:
  • Barcha kabellar mahkam ulanganligiga ishonch hosil qiling.
  • Verify the power adapter is correctly plugged in and providing power.
  • Check your guitar and amplifier volume settings.
  • Test with different cables to rule out faulty connections.
• Keraksiz shovqin/guvlar:
  • Ensure you are using the correct power adapter.
  • Boshqa elektr rozetkasidan foydalanib ko'ring.
  • Keep the pedal away from other electronic devices that may cause interference.
• Effect Not Activating:
  • Press the footswitch firmly. The LED should illuminate.
  • Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Kafolat va qo'llab-quvvatlash

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a 1 yillik mahsulot kafolati sotib olingan kundan boshlab.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE websayt.