Legrand 1597TRW Tamper Resistant GFCI Wall Outlet User Manual

Kirish

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This device is part of the radiant collection, designed to offer reliable electrical protection in residential and commercial environments. Please read these instructions thoroughly before beginning installation or use.

Xavfsizlik ma'lumotlari

WARNING: Risk of electric shock. May cause serious injury or death. Turn off power at the circuit breaker or fuse box before installation.

Always disconnect power at the service panel before working with electrical wiring.
O'rnatish malakali elektrik tomonidan yoki barcha mahalliy va milliy elektr qoidalariga muvofiq amalga oshirilishi kerak.
Do not install in wet locations unless specifically rated for such use.
Barcha simli ulanishlar xavfsiz va to'g'ri izolyatsiya qilinganligiga ishonch hosil qiling.
Test the GFCI outlet monthly to ensure proper operation.

Paket tarkibi

O'rnatishni boshlashdan oldin barcha komponentlar mavjudligini tekshiring:

Legrand 1597TRW Tamper Resistant GFCI Wall Outlet (White)
O'rnatish vintlari
Qo'llanma (bu hujjat)

Note: A screwless wall plate is not included and must be purchased separately.

O'rnatish

Follow these steps for proper installation of your GFCI outlet:

Quvvatni o'chirish: Locate the circuit breaker or fuse that supplies power to the outlet box. Turn it off completely. Verify power is off using a voltagsinovchi.
Eski rozetkani olib tashlang: Carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wires were connected to the "LINE" and "LOAD" terminals.
Simlarni aniqlang:
- LINE Wires: These wires bring power from the circuit breaker to the GFCI outlet.
- LOAD Wires: These wires carry power from the GFCI outlet to other downstream receptacles or devices that you want to protect. If there are no downstream receptacles, cap the LOAD wires individually.
- Tuproq simi: Typically bare copper or green insulated.
Connect Wires to GFCI:
- ni ulang LINE wires to the terminals marked "LINE" on the GFCI outlet.
- ni ulang YUKLASH wires to the terminals marked "LOAD" on the GFCI outlet.
- ni ulang tuproqli sim to the green ground screw.
Muhim: The Legrand 1597TRW features a feed-thru wiring configuration that allows the GFCI to protect downstream receptacles. It also prevents line-load reversal miswire, meaning there will be no power to the face or downstream receptacles if wired incorrectly. An auto-ground clip assures a positive ground to a metal box.
Rozetkani o'rnating: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided mounting screws.
Devor plitasini o'rnatish: Attach the screwless wall plate (not included) over the GFCI outlet.
Quvvatni tiklash: O'chirish to'xtatuvchisida quvvatni qayta yoqing.

Rasm: old view of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This image shows the two tamper-resistant receptacles, the TEST button (black), and the RESET button (red).

Operatsiya

The GFCI outlet is designed to protect against electrical shock by quickly shutting off power if a ground fault is detected.

RESET tugmasi: After installation or a power outage, press the red RESET button to restore power to the outlet.
TEST tugmasi: Press the black TEST button to simulate a ground fault. The GFCI should trip, and power to the outlet will be cut off. This confirms the GFCI is functioning correctly.

Oylik test:

It is recommended to test your GFCI outlet monthly to ensure it is providing continuous protection. To test:

Alamp or other device into the GFCI outlet and turn it on.
Press the black TEST button. The lamp should turn off, and the red RESET button should pop out.
Press the red RESET button. The lamp should turn back on.
Agar lamp does not turn off or on as described, the GFCI may be faulty and should be replaced.

Xizmat

The Legrand 1597TRW GFCI outlet requires minimal maintenance. Regular testing is the primary maintenance procedure.

Keep the outlet clean and free from dust and debris.
Do not paint over the GFCI outlet or its buttons, as this can impair operation.
If the GFCI trips frequently without an apparent cause, consult a qualified electrician to inspect your wiring.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Muammo	Mumkin sabab	Yechim
GFCI will not reset.	GFCI uchun kuch yo'q. Tuproq xatosi aniqlandi. Line-load reversal miswire. Faulty GFCI.	O'chirish to'xtatuvchisini tekshiring. Unplug all devices from the GFCI and downstream outlets. Try to reset. If it resets, plug devices back in one by one to identify the faulty device. Verify wiring connections (LINE to LINE, LOAD to LOAD). Replace the GFCI.
GFCI trips frequently.	Faulty appliance/device. Moisture in the circuit. Damaged wiring.	Identify and remove the faulty appliance. Ensure the environment is dry. Simlarni tekshirish uchun malakali elektrikchiga murojaat qiling.
Rozetkaga quvvat yo'q.	GFCI ishlamay qoldi. O'chirish to'xtatuvchisi ishdan chiqdi. Noto'g'ri simlar.	RESET tugmasini bosing. O'chirish to'xtatuvchisini tekshiring va qayta o'rnating. Simli ulanishlarni tekshiring.

Texnik xususiyatlari

Model: 1597TRW
Brend: Legrand
Rang: Oq
Ampo'chirish: 15 Amps
jildtage: 125 volt
Jami elektr rozetkalari: 2
Ulagich turi: Nema 5-15
Material: Metall
Xususiyatlari: Tamper Resistant, Auto-Ground Clip, Feed-Thru Wiring, Line-Load Reversal Miswire Prevention
UPC: 680147085438
ASIN: B079LTP7Y5

Kafolat va qo'llab-quvvatlash

Legrand products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legrand website. For technical support or further assistance, please contact Legrand customer service.

Contact information for Legrand can typically be found on their official websayt yoki mahsulot qadoqlash.

Legrand 1597TRW