1. Mahsulot tugadiview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Asosiy xususiyatlar:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Kesish quvvati: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Xavfsizlik xizmati: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Xavfsizlik bo'yicha ko'rsatmalar
Har doim ushbu elektr asbob bilan ta'minlangan barcha xavfsizlik ogohlantirishlari, ko'rsatmalar, rasmlar va texnik xususiyatlarni o'qing va tushuning. Quyida sanab o'tilgan barcha ko'rsatmalarga rioya qilmaslik elektr toki urishi, yong'in va/yoki jiddiy shikastlanishga olib kelishi mumkin.
Umumiy xavfsizlik ogohlantirishlari:
- Tegishli shaxsiy himoya vositalarini (PPE), shu jumladan xavfsizlik ko'zoynaklari, eshitish vositalarini va qo'lqoplarni taqing.
- Ish joyi toza, yaxshi yoritilgan va to'siqlar bo'lmaganligiga ishonch hosil qiling.
- Asbobni ishlatayotganda bolalar va atrofdagilarni uzoqroq tuting.
- Never operate the tool if the power cord or plug is damaged.
- Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Kesilgan material uchun to'g'ri pichoqni ishlating.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Components Overview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Dvigatel birligi
- Suv ombori
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Pichoq himoyachisi
- Yoqish/o'chirish tugmasi
- Tashish dastasi
1 -rasm: tugadiview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Sozlash
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Paketni ochish va tekshirish
- Paketdagi barcha komponentlarni ehtiyotkorlik bilan olib tashlang.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Ro'yxatdagi barcha komponentlarning mavjudligiga ishonch hosil qiling.
4.2 Suv omborini to'ldirish
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Foydalanish bo'yicha ko'rsatmalar
Follow these steps for safe and effective tile cutting.
5.1 Quvvatni yoqish/o‘chirish
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Kesish
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Official Product Video: How to Use
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Xizmat ko'rsatish
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Suv omborini tozalash
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Elektr ta'minotini uzing.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Komponentlarni qayta yig'ing.
6.2 Pichoqni almashtirish
Replace the diamond cutting disc when it becomes dull or damaged.
- Asbobning elektrdan uzilganligiga ishonch hosil qiling.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Tutqich gaykani mahkam torting.
7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
This section addresses common issues you might encounter with your tile cutter.
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Mashina ishga tushmaydi | Elektr ta'minoti yo'q; noto'g'ri kalit; motor muammosi. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Texnik shartlar
| Xususiyat | Tafsilot |
|---|---|
| Brend | Einhell |
| Model raqami | 4301185 |
| Quvvat | 800 vatt |
| jildtage | 240 volt |
| Tezlik | 2950 aylanish tezligi |
| Diamond Cutting Disc Diameter | 180 mm |
| Max. Cutting Height (90°) | 34 mm |
| Max. Cutting Height (45°) | 14 mm |
| Angle of Cut | 45 daraja |
| Stol o'lchamlari (Uzunligi x Kengligi) | 39.6 sm x 38.5 sm |
| Mahsulot o'lchamlari (U x G x Y) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Mahsulot og'irligi | 9.1 kilogramm |
| Quvvat manbai | Elektr simi bilan |
| Maxsus xususiyatlar | Adjustable angle stop, parallel stop with scale |
9. Kafolat va qo'llab-quvvatlash
9.1 Kafolat haqida ma'lumot
This Einhell product comes with a 2 yillik cheklangan kafolat. Iltimos, har qanday kafolat da'volari uchun sotib olinganligingizni tasdiqlovchi hujjatingizni saqlab qo'ying.
9.2 Mijozlarni qo‘llab-quvvatlash
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webEng so'nggi aloqa ma'lumotlari uchun sayt yoki mahsulotingiz qadoqlariga qarang.