Terminator TCL 1070 Cylinder Door Lock Instruction Manual

Kirish

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Terminator TCL 1070 Cylinder Door Lock. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.

Xavfsizlik ma'lumotlari

• Always wear appropriate personal protective equipment, such as safety glasses, during installation.
• Ensure the door frame and door are structurally sound before installing the lock.
• Do not attempt to modify the lock cylinder or keys, as this may compromise security and void the warranty.
• Keep keys in a secure location and away from unauthorized access.

Paket tarkibi

Paketingizda quyida sanab o'tilgan barcha narsalar mavjudligiga ishonch hosil qiling:

• 1x Terminator TCL 1070 Cylinder Door Lock
• 3x Nickel Plated Keys
• 1x Fixing Screw

1-rasm: Contents of the Terminator TCL 1070 package, showing the brass cylinder lock, three nickel-plated keys, and the securing screw.

O'rnatish bo'yicha ko'rsatmalar

Follow these steps to install your new cylinder door lock. Ensure you have the correct size cylinder for your door thickness.

1. Measure Your Existing Cylinder (if applicable): If replacing an old cylinder, remove the fixing screw located on the door's edge, below the latch. Insert the key into the cylinder and turn it slightly (about 15-20 degrees) to align the cam with the cylinder body. Carefully pull the cylinder out. Measure the length from the center of the fixing screw hole to each end of the cylinder. The TCL 1070 has dimensions of 35mm x 35mm (70mm total length).
2. Eshikni tayyorlang: Ensure the mortise lock body is correctly installed in the door and the cylinder hole is clear.
3. Insert the New Cylinder: Insert one of the provided keys into the new Terminator TCL 1070 cylinder. Turn the key slightly to align the cam (the central rotating part) with the cylinder body.
4. Position the Cylinder: Slide the cylinder into the mortise lock opening from the side of the door. Ensure it is centered and flush with both sides of the door.
5. Tsilindrni mahkamlang: Insert the long fixing screw through the screw hole on the door's edge and into the threaded hole in the center of the cylinder. Tighten the screw firmly but do not overtighten.
6. Sinov operatsiyasi: With the door open, insert a key from both sides and turn it to ensure smooth operation of the lock mechanism. The key should turn freely, and the cam should retract and extend without obstruction.

2-rasm: Batafsil view of the cylinder lock, highlighting the key entry point and the cam.

3-rasm: Yuqori view of the cylinder lock, indicating the position of the fixing screw hole.

4-rasm: The cylinder lock held in a hand, illustrating its approximate size and showing a length of 7 cm (3.1 inches).

Foydalanish bo'yicha ko'rsatmalar

To operate the Terminator TCL 1070 Cylinder Door Lock:

1. Qulflash uchun: Insert one of the provided keys into the keyhole. Turn the key clockwise until the deadbolt extends fully into the door frame. Remove the key.
2. Qulfni ochish uchun: Insert the key into the keyhole. Turn the key counter-clockwise until the deadbolt fully retracts into the door. Remove the key.

Ensure the key is fully inserted before turning to prevent damage to the key or the lock mechanism.

Xizmat

Regular maintenance helps ensure the smooth operation and longevity of your lock.

• Moylash: Periodically (e.g., once a year), apply a small amount of graphite-based lubricant or a specialized lock lubricant into the keyway. Avoid using oil-based lubricants as they can attract dust and debris.
• Tozalash: Wipe the exterior of the lock cylinder with a soft, dry cloth to remove dust and grime. Do not use abrasive cleaners or solvents.
• Asosiy parvarish: Avoid bending or damaging the keys. Store spare keys securely.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Texnik xususiyatlari

5-rasm: Packaging detail showing dimensions (35mm x 35mm) and model number TCL 1070.

Kafolat haqida ma'lumot

Specific warranty details for the Terminator TCL 1070 Cylinder Door Lock are not provided in this manual. For warranty claims or information, please refer to the product packaging or contact the manufacturer directly.

Mijozlarni qo‘llab-quvvatlash

If you encounter any issues or have questions regarding your Terminator TCL 1070 Cylinder Door Lock that are not covered in this manual, please contact Terminator customer support through their official websayt yoki mahsulot sotib olingan chakana sotuvchi.