S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor User Manual

1. Kirish

This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.

Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.

2. O'rnatish va o'rnatish

Optimal ishlash va xavfsizlik uchun to'g'ri o'rnatish juda muhimdir. Ushbu amallarni diqqat bilan bajaring.

2.1 Paketni ochish va tekshirish

• Carefully remove the sensor from its packaging.
• Inspect the sensor for any visible damage that may have occurred during shipping.
• Qadoqlash qog'ozida ko'rsatilgan barcha komponentlar mavjudligiga ishonch hosil qiling.

2.2 Sensorni o'rnatish

The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.

1. Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
2. Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
3. Ensure the sensor is oriented correctly for the intended detection application.

2-rasm: yon view of the S18AW3FF50 sensor, showing the threaded barrel and cable.

2.3 Elektr aloqalari

OGOHLANTIRISH: Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.

The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.

Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.

Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.

3. Operatsiya

Once installed and wired, the S18AW3FF50 sensor is ready for operation.

3.1 Quvvatni yoqish

Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.

3.2 Detection Principle

The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).

3.3 Range and Performance

The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.

4. Xizmat ko'rsatish

The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.

4.1 Tozalash

• Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
• Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.

4.2 Cable and Connection Inspection

• Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
• Check electrical connections to ensure they remain secure and free from corrosion.

5. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

This section provides solutions to common issues encountered with the S18AW3FF50 sensor.

6. Texnik shartlar

Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.

• Model: S18AW3FF50
• Seriya: EZ-Beam S18 Series
• Aniqlash diapazoni: 50 mm
• Kirish hajmitage: 20-250VAC
• Chiqish turi: SPST Solid-State Light Operate
• Kabel uzunligi: 2 million (6.5 fut)
• Sensor turi: Photoelectric, Fixed Field
• Ishlab chiqaruvchi: BANNER ENGINEERING
• ASIN: B07RZTBRLS
• Birinchi mavjud sana: 3 yil 2021 dekabr

7. Kafolat va qo'llab-quvvatlash

For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official websayt.

Qaytarish siyosati: The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.

Ishlab chiqaruvchi: BANNER ENGINEERING

Qo'shimcha yordam olish uchun tashrif buyuring BANNER ENGINEERING official websayt.