Intel Wi-Fi 6 (Gig+) Desktop Kit AX200 User Manual

1. Kirish

This manual provides detailed instructions for the installation, operation, and maintenance of your Intel Wi-Fi 6 (Gig+) Desktop Kit AX200. This kit is designed to upgrade your desktop computer with Wi-Fi 6 (802.11ax) and Bluetooth 5.0 capabilities, offering enhanced wireless performance and security.

1.1 Paket tarkibi

Quyida sanab o'tilgan barcha narsalar mahsulotingiz paketida mavjudligini tekshiring:

• Intel® Wi-Fi 6 AX200 (Gig+) adapter (M.2 2230 module)
• Optimized external antennas (2)
• Standard size mounting bracket with RF cables installed
• Kam profile o'rnatish braketi

Image 1.1: Contents of the Intel Wi-Fi 6 Desktop Kit AX200.

2. O'rnatish va o'rnatish

Before proceeding with installation, ensure your computer is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

2.1 Compatibility Requirements

• Motherboard must have an M.2 Key E slot.
• Operating System: Windows 10 64-bit.
• Not compatible with systems containing an Intel 9560 CNVI part or systems with a BIOS lock.

2.2 O'rnatish bosqichlari

1. Kompyuteringizni tayyorlang: Power down your computer, unplug the power cord, and open the computer case.
2. Locate the M.2 Key E slot: Refer to your motherboard's manual to identify the M.2 Key E slot.
3. Install the AX200 module: Gently insert the Intel Wi-Fi 6 AX200 M.2 module into the M.2 Key E slot at a 30-degree angle. Press down and secure it with the provided screw (if not included, use a compatible M.2 screw from your motherboard accessories).
4. Attach RF cables to the module: Carefully snap the two small RF cables from the mounting bracket onto the corresponding connectors on the AX200 module. Ensure they are securely attached.
5. Install the mounting bracket: Choose either the standard or low-profile mounting bracket based on your PC case. Secure the bracket into an available PCIe slot opening on your computer case.
6. Connect external antennas: Screw the two optimized external antennas onto the connectors on the mounting bracket. Position the antennas for optimal signal reception.

Image 2.1: Components ready for installation, showing the M.2 module, cables, bracket, and antennas.

Image 2.2: The two external antennas.

2.3 Drayv o'rnatish

After hardware installation, close your computer case, plug in the power cord, and power on your computer. Windows 10 should automatically detect and install the necessary drivers for the Intel Wi-Fi 6 AX200 module. If drivers are not automatically installed, or if you experience issues, download the latest drivers from the official Intel support websayt.

3. Operatsiya

3.1 Wi-Fi tarmog'iga ulanish

1. Once drivers are installed, click the Wi-Fi icon in the Windows taskbar.
2. Mavjud tarmoqlar ro'yxatidan kerakli Wi-Fi tarmog'ingizni tanlang.
3. Click 'Connect' and enter the network security key (password) if prompted.
4. Your computer should now be connected to the Wi-Fi network.

3.2 Bluetooth qurilmalarini ulash

1. Windows sozlamalari > Qurilmalar > Bluetooth va boshqa qurilmalar-ga o‘ting.
2. Bluetooth yoqilganligiga ishonch hosil qiling.
3. "Bluetooth yoki boshqa qurilma qo'shish" tugmasini bosing va "Bluetooth" ni tanlang.
4. Put your Bluetooth device into pairing mode (refer to your device's manual).
5. Select your device from the list and follow any on-screen prompts to complete pairing.

Image 3.1: Bluetooth Wireless Technology Support.

4. Xizmat ko'rsatish

The Intel Wi-Fi 6 Desktop Kit AX200 requires minimal maintenance. Keep your computer's interior clean from dust to ensure proper airflow and prevent overheating of components. Regularly update your Wi-Fi and Bluetooth drivers from the official Intel weboptimal ishlash va xavfsizlikni ta'minlash uchun sayt.

5. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

5.1 Umumiy muammolar va yechimlar

• Wi-Fi yoki Bluetooth aniqlanmadi:
  • Ensure the AX200 module is correctly seated in the M.2 slot and secured.
  • Verify that the RF cables are securely connected to the module and antennas.
  • Check Device Manager in Windows to see if the device is recognized and drivers are installed. Reinstall drivers if necessary.
  • Confirm your motherboard has an M.2 Key E slot and is not subject to BIOS lock.
• Slow Wi-Fi speeds or frequent disconnections:
  • Ensure your router supports Wi-Fi 6 (802.11ax) for optimal performance.
  • Update your Wi-Fi drivers to the latest version from Intel's websayt.
  • Check antenna connections and position them for better signal.
  • Boshqa elektron qurilmalardan shovqinni kamaytiring.
• Bluetooth qurilmasi ulanmayapti:
  • Ensure Bluetooth is enabled in Windows settings.
  • Bluetooth qurilmasini ulash rejimiga o'tkazing.
  • Qurilmani Windows Bluetooth sozlamalarida olib tashlang va qayta qo'shing.
  • Update Bluetooth drivers.

For further assistance, refer to the Intel support website or contact Intel customer service.

6. Texnik shartlar

7. Kafolat va qo'llab-quvvatlash

Intel products are backed by a limited warranty. For specific warranty terms and conditions applicable to your region, please refer to the documentation included with your product or visit the official Intel websayt.

7.1 Texnik yordam

For technical assistance, driver downloads, and additional resources, please visit the official Intel Support websayt:

Intel qo'llab-quvvatlashi Websayt

Intel also offers support via phone and chat. Refer to the support webaloqa ma'lumotlari uchun sayt.