Lepro 32.8ft RGB LED Strip Lights User Manual

1. Kirish

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.

Figure 1: Complete Lepro LED Strip Lights Kit

2. Paket tarkibi

Paketda barcha komponentlar mavjudligiga ishonch hosil qiling:

• 2 x 16.4ft (5m) RGB LED Strip Lights
• 1 x 44-Key IR Remote Control
• 1 x 12V quvvat adapteri
• 1 x Control Box (IR Receiver)

3. O'rnatish va sozlash

To'g'ri o'rnatish uchun quyidagi amallarni bajaring:

1. Sirtni tayyorlang: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
2. O'lchash va kesish (ixtiyoriy): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
3. Tasmani ulang: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
4. Komponentlarni ulash:
   • Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
   • Connect the 12V power adapter to the control box.
   • Quvvat adapterini standart elektr rozetkaga ulang.
5. Masofadan boshqarish pultini yoqish: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.

Figure 2: Connection Diagram for LED Strip Lights

For a visual guide on installation and various applications, please refer to the official product video below:

4. Foydalanish bo'yicha ko'rsatmalar

The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.

Figure 3: 44-Key IR Remote Control Layout

Masofadan boshqarish funksiyalari:

• Yoqish/oʻchirish: Power button to turn the lights on or off.
• Yorqinlikni sozlash: Up/Down arrows to increase or decrease brightness.
• Rang tanlash: 20 preset static colors, including Red, Green, Blue, and White.
• O'z qo'lingiz bilan ranglar: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
• Dinamik rejimlar: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.

5. Xizmat ko'rsatish

LED chiziqli chiroqlaringizning uzoq umr ko'rishi va optimal ishlashini ta'minlash uchun quyidagi texnik ko'rsatmalarga amal qiling:

• Tozalash: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
• Atrof-muhit: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
• Yopishqoq parvarish: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.

6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:

7. Mahsulot spetsifikatsiyalari

8. Kafolat haqida ma'lumot

Ushbu mahsulot a bilan qoplangan 2 yillik kafolat from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9. Mijozlarni qo'llab-quvvatlash

For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.