ATOTO AC-HD03LR

ATOTO AC-HD03LR 720P Rear View Zaxira kamera foydalanuvchi uchun qo'llanma

Model: AC-HD03LR | Brand: ATOTO

1. Kirish

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your ATOTO AC-HD03LR 720P Rear View Backup Camera. Please read this manual thoroughly before using the product to ensure correct usage and optimal performance. Keep this manual for future reference.

2. Mahsulot tugadiview

Asosiy xususiyatlar

  • HD 720P Video Output: Provides clear 720P HD video signals for enhanced visibility.
  • 180-Degree Ultra-Wide Angle: Offers an expansive field of view to minimize blind spots.
  • Haqiqiy vaqtda orqa View (LRV): Orqa tomonni ko'rsatadi view in real-time even when driving forward, aiding in obstacle avoidance.
  • Virtual atrof-muhit View (VSV) Parking Assist: Compatible with specific ATOTO head units to provide a simulated bird's-eye view for parking.
  • Tungi ko'rish qobiliyati: Ensures clear visibility in low-light conditions.
  • IP67 suv o'tkazmaydigan reytingi: Har xil ob-havo sharoitlariga bardosh berish uchun mo'ljallangan.
  • Oson o'rnatish: Simple setup with an included 8-meter extension wire.

Moslik

This camera is specifically designed for use with the following ATOTO car stereo models:

  • ATOTO A6PF/PL/PP series
  • ATOTO S8 series (excluding S8 UN/PN/MS/Gen4 models)
  • ATOTO S8 Gen1 models (requires firmware update for LRV function)

Eslatma: Bu kamera mos kelmaydi with ATOTO A6GC, F7, A5, or X10 models, or other car stereo brands.

Comparison of 180-degree wide-angle view versus standard view, highlighting 720P image quality.

Image: The 180-degree wide-angle view provides a significantly broader perspective compared to standard cameras, enhancing situational awareness. The 720P image quality ensures clear and detailed visuals, superior to 480-line resolution.

3. Paket tarkibi

Quyida sanab o'tilgan barcha narsalar paketingizga kiritilganligini tekshiring:

  • 1x ATOTO AC-HD03LR Rear Wide-Angle Camera
  • 1x 8-Meter Extension Wire
  • 2x o'rnatish vintlari
  • 1x Adhesive Sticker
  • 1x Calibration Cloth
Contents of the ATOTO AC-HD03LR package, including the camera, extension wire, screws, sticker, and calibration cloth.

Image: The package includes the AC-HD03LR camera (01), an 8-meter extension wire (02), two screws (03), an adhesive sticker (04), and a calibration cloth (05).

4. O'rnatish va o'rnatish

Ulanish diagrammasi

Follow the wiring diagram below for proper connection to your ATOTO car stereo system. Ensure all connections are secure to prevent signal loss or power issues.

Wiring diagram for connecting the ATOTO AC-HD03LR camera to a car stereo. It shows the camera connecting to the video signal input (RCIN) and power (reversing light and accessory power).

Image: Recommended connection diagram. The camera's video signal connects to the car stereo's RCIN (C). The camera's power (A1, B) connects to the reversing light and accessory power (D), while the rear camera trigger wire (A2) connects to the car stereo's rear camera input.

O'rnatish bosqichlari

  1. Kamerani o'rnatish: Choose a suitable location on the rear of your vehicle, typically near the license plate, for optimal viewing. Secure the camera using the provided screws or adhesive sticker.
  2. Kabelni yo'naltirish: Carefully route the 8-meter extension wire from the camera to the car stereo unit. Ensure the cable is protected from sharp edges, heat, and moving parts.
  3. Quvvatni ulash: Connect the camera's power wire (red) to the vehicle's reversing light power supply (typically 12V). Connect the ground wire (black) to a suitable chassis ground point.
  4. Connect Video Signal: Plug the RCA video connector from the camera's extension wire into the 'RCIN' (Rear Camera Input) port on your ATOTO car stereo.
  5. Connect Trigger Wire: Connect the camera's trigger wire (usually a thin red wire on the RCA cable) to the 'Rear Camera (+)' or 'Reverse Gear Signal' input on your ATOTO car stereo. This tells the stereo when to switch to the camera view.
  6. Sinov funktsiyasi: Before finalizing the installation, turn on your car stereo and engage reverse gear to ensure the camera displays correctly.

5. Foydalanish bo'yicha ko'rsatmalar

Virtual atrof-muhit View (VSV) Parking

The VSV function, available on compatible ATOTO S8 (Gen2) Android car stereos, uses the AC-HD03LR camera to create a simulated bird's-eye view of your vehicle's surroundings. This feature significantly enhances parking safety by providing a comprehensive overhead perspective.

  • To activate VSV, ensure your ATOTO S8 (Gen2) head unit has the necessary firmware and image stitching algorithm.
  • The system will process the camera's 180-degree input to generate a dynamic, simulated 360-degree view on your car stereo screen.
  • Your vehicle's position and surrounding obstacles will be clearly distinguished on the display.
Simulated bird's-eye view parking assist display on a car stereo, showing the vehicle and surrounding parking lines.

Image: A simulated bird's-eye view from the VSV parking assist system, showing the vehicle's position relative to parking lines and surrounding objects.

Haqiqiy vaqtda orqa View (LRV)

The LRV function allows you to view the rear of your vehicle in real-time, even when driving forward. This is particularly useful for monitoring traffic behind you or checking for blind spots.

  • This feature is supported by specific ATOTO head units and requires a firmware update for S8 Gen1 models.
  • Consult your car stereo's manual for instructions on how to activate and switch to the real-time rear view ko'rsatish.

Kamera kalibrlash

Calibration is essential for accurate VSV display. The included calibration cloth is used to help the system map the camera's view correctly. Perform calibration in a flat, open area with good lighting.

A car positioned over a large checkered calibration mat, used for camera calibration.

Image: Vehicle positioned over the calibration cloth. The distance between the cloth's center and the rear bumper may vary by vehicle type, but the entire cloth should be visible on screen for proper calibration.

Screenshots detailing the four steps of the camera calibration process on an ATOTO car stereo, including vehicle size selection, starting calibration, centering the image, and trimming the footage.

Image: Calibration steps on the car stereo display. Step 1: Select Vehicle Size by entering parameters. Step 2: Start Calibration by touching 'Calibration' on the rear camera video screen. Step 3: Center the Rear Video Image if the camera is not centrally mounted. Step 4: Trim Rear View Foo kameratage to remove black blocks in corners and adjust the back shade.

6. Xizmat ko'rsatish

Regular maintenance ensures the longevity and optimal performance of your camera.

  • Tozalash: Vaqti-vaqti bilan kamera linzalarini yumshoq, damp cloth to remove dirt, dust, or water spots. Avoid abrasive cleaners that could scratch the lens.
  • Tekshirish: Regularly check the camera's mounting and wiring for any signs of damage, corrosion, or loose connections. Ensure the camera is securely fastened.
  • Suvga ta'sir qilish: While the camera is IP67 waterproof, avoid directing high-pressure water jets directly at the camera during car washes, as this could potentially compromise the seal over time.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your ATOTO AC-HD03LR camera, refer to the following common problems and solutions:

MuammoMumkin sababYechim
Ekranda rasm yo'qBo'shashgan video kabel ulanishi
Kameraga quvvat yo'q
Incorrect trigger wire connection
Camera malfunction
Check RCA video cable connection at both ends.
Verify camera power supply (12V) and ground connections.
Ensure trigger wire is correctly connected to the car stereo's reverse input.
Test camera with another compatible display if possible.
Tasvir loyqa yoki buzilganKirli linza
Incorrect camera angle
Firmware issue on head unit
Calibration required/incorrect
Kamera linzalarini tozalang.
Adjust camera angle for optimal view.
Ensure car stereo firmware is up-to-date.
Perform camera calibration as per instructions.
VSV/LRV not workingIncompatible head unit
Firmware not updated
Calibration not performed
Confirm head unit compatibility (ATOTO A6PF/PL/PP, S8 series).
Update car stereo firmware, especially for S8 Gen1 models.
Perform camera calibration.
Image has black blocks in cornersCalibration trimming neededFollow Step 4 of the calibration process to trim the video footage.

8. Texnik shartlar

XususiyatSpetsifikatsiya
Mahsulot modeliAC-HD03LR (North American version, with license plate mounting bracket)
Tasvir sensori formati1/2.9 dyuymli CMOS
Piksellar1280(H) x 720(V)
Oq balansAvtomatik
Orqa yorug'lik kompensatsiyasiHa
Shovqinni kamaytirish3D DNR
Video kadr tezligi720P @ 30 kadr/s
Video signal chiqishiAnalog HD signal, 1.0 Vp-p / 75Ω
Operatsion jildtageDC 12V
Ishlash oqimi130mA ~ 150mA
Ishlash harorati-30℃ ~ +80℃ (-22°F ~ 176°F)
Orqa View Yo'riqnomaNot built-in, provided by car stereo system
Suv o'tkazmaydigan reytingIP67
Tungi ko'rishHa
Ob'ektiv maydoni View180 daraja
O'rnatish turiYuzaki o'rnatish

9. Kafolat va qo'llab-quvvatlash

ATOTO products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official ATOTO website. You can also contact ATOTO customer service directly through their support channels.

Official ATOTO Websayt: www.myatoto.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.