RODOT QIACHIP RX480E 433MHz RF Wireless Transmitter and Receiver Module Instruction Manual

1. Kirish

This manual provides detailed instructions for the setup, operation, and maintenance of the RODOT QIACHIP RX480E 433MHz RF Wireless Transmitter and Receiver Module. This versatile module is designed for various applications including remote control switches, security systems, smart home devices, and DIY electronics projects. It offers reliable wireless communication with multiple operating modes.

2. Sozlash

2.1. Components Overview

The kit includes the RX480E receiver module, the TX118S-4 transmitter module, and copper spring antennas for both.

Transmitter Module (TX118S-4)

1-rasm: Wiring diagram for the TX118S-4 transmitter module. It shows connections for DC 3V-24V power input, an LED indicator, and four key inputs (K1, K2, K3, K4) connected to ground.

Receiver Module (RX480E)

2-rasm: Pinout diagram for the RX480E receiver module. Pins include GND, +V (power input), D0, D1, D2, D3 (data outputs), and VT (valid transmission indicator). An antenna connection point is also visible.

2.2. Simlarni ulash bo'yicha ko'rsatmalar

Connect the modules according to the provided diagrams. Ensure correct polarity for power connections to prevent damage.

• Transmitter (TX118S-4): Connect DC 3V-24V to the power input pins. Connect the four key inputs (K1-K4) to ground via push buttons. An LED indicates transmission.
• Receiver (RX480E): Connect DC 3.3V-5V to the +V and GND pins. The D0-D3 pins provide output signals corresponding to the transmitter's key presses. The VT pin indicates a valid signal reception.
• Antenna: Attach the copper spring antenna to the designated ANT pin on both the transmitter and receiver modules for optimal range.

3-rasm: A comprehensive circuit diagram illustrating the connection between the TX118S-4 transmitter and the RX480E receiver, including a ULN2003 driver chip for controlling external loads like LEDs.

3. Operating Modes and Pairing

The RX480E receiver module supports multiple operating modes, which are set using the learning button on the receiver. After setting the mode, you can pair your remote control with the receiver.

3.1. Learning Button and Mode Setting

4-rasm: Close-up of the RX480E receiver module highlighting the learning button and indicating the number of presses required to set different operating modes.

• Momentary Mode (Inching Mode): Press the learning button bir marta. The output will be active only while the corresponding remote button is pressed.
• Toggle Mode (Self-Lock Mode): Press the learning button ikki marta. Press a remote button once to activate its corresponding output; press the same button again to deactivate it.
• Latched Mode (Interlock Mode): Press the learning button uch marta. Press a remote button to activate its corresponding output. All other active outputs will automatically deactivate.

3.2. Ulanish jarayoni

After selecting the desired mode by pressing the learning button the specified number of times, the receiver enters pairing mode. While in pairing mode, press any button on your remote control. The receiver's indicator LED will flash to confirm successful pairing.

3.3. Advanced Operating Modes

The RX480E module also supports advanced combined modes such as 2-channel Toggle + 2-channel Momentary, 2-channel Latched + 2-channel Momentary, and 2-channel Latched + 2-channel Toggle. These modes require specific programming or configuration. For detailed instructions on these advanced modes, please refer to the official support resources or contact customer service.

3.4. Video Demonstrations

For a visual guide on setting up and pairing the RX480E module with various remote controls and demonstrating the different operating modes, please watch the official video below:

4. Xizmat ko'rsatish

To ensure the longevity and optimal performance of your RX480E and TX118S-4 modules, follow these simple maintenance guidelines:

• Toza va quruq holda saqlang: Protect the modules from dust, dirt, and moisture. Avoid exposing them to extreme temperatures or humidity.
• Ulanishlarni tekshiring: Vaqti-vaqti bilan barcha simli ulanishlarni tekshiring, ular xavfsiz va korroziyadan xoli bo'lsin.
• Quvvatlantirish manbai: Belgilangan hajm doirasida har doim barqaror quvvat manbaidan foydalaningtage range (DC 3V-24V for transmitter, DC 3.3V-5V for receiver).
• Antennani parvarish qilish: Ensure the copper spring antennas are securely attached and not bent or damaged, as this can affect signal range and reliability.

5. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your RX480E and TX118S-4 modules, refer to the following troubleshooting tips:

• No Signal or Poor Range:
  • Verify that both the transmitter and receiver are powered correctly.
  • Check that the antennas are properly connected and undamaged.
  • Masofadan boshqarish pultida yangi batareyalar borligiga ishonch hosil qiling.
  • Uzatuvchi va qabul qilgich orasidagi masofani kamaytiring.
  • Check for potential sources of RF interference in the environment.
• Incorrect Operating Mode:
  • Re-enter the desired operating mode by pressing the learning button the correct number of times (1 for Momentary, 2 for Toggle, 3 for Latched).
  • Re-pair the remote control with the receiver after setting the mode.
• LEDlar javob bermaydi:
  • Barcha simlarning ulanishlari to'g'ri va xavfsiz ekanligiga ishonch hosil qiling.
  • Check the power supply to both modules.
  • Ensure the remote control is transmitting a signal (its LED should light up when a button is pressed).

6. Texnik shartlar

6.1. Module Dimensions

Receiver Dimensions (RX480E)

5-rasm: Top-down and side view of the RX480E receiver module, showing its compact size with approximate dimensions of 1.1 inches by 0.47 inches.

Transmitter Dimensions (TX118S-4)

6-rasm: Top-down and bottom view of the TX118S-4 transmitter module, illustrating its dimensions of approximately 0.74 inches by 0.74 inches.

7. Kafolat

RODOT products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or external factors.

8. Mijozlarni qo'llab-quvvatlash

For technical assistance, troubleshooting, or inquiries regarding advanced operating modes, please contact RODOT customer support:

• Email: qiai@qiachip.com
• Onlayn do'kon: ga tashrif buyuring RODOT Store on Amazon qo'shimcha mahsulotlar va ma'lumotlar uchun.