Kirish
Thank you for choosing the Optex 990047 Indoor/Outdoor Wireless Digital Thermometer. This device provides accurate temperature readings for both your indoor environment and an outdoor location via a wireless sensor. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your thermometer.
Paket tarkibi
- 1 x Optex 990047 Main Display Unit
- 1 x simsiz tashqi makon sensori
- 1 x foydalanuvchi qo'llanmasi
- (Batteries not included, typically requires AAA or AA batteries for both units)
Mahsulot tugadiview
Familiarize yourself with the components of your Optex thermometer.
Main Display Unit (Front)

Rasm: Old view of the Optex 990047 main display unit. The digital screen shows indoor and outdoor temperatures, along with high/low records and trend indicators. Below the screen are three buttons: 'CH', '°C/°F', and 'CLEAR'.
- Raqamli displey: Shows indoor temperature (top) and outdoor temperature (bottom), along with HI/LO records and temperature trend arrows.
- CH tugmasi: Selects the wireless channel (if multiple sensors are used) or initiates sensor search.
- °C/°F tugmasi: Tselsiy va Farengeyt harorat birliklari o'rtasida almashinadi.
- CLEAR tugmasi: Clears the recorded HI/LO temperatures.
Main Display Unit (Back)

Rasm: Orqaga view of the Optex 990047 main display unit. It features a battery compartment cover and an integrated kickstand for tabletop placement, as well as a hanging hole.
- Batareya bo'limi: Houses the batteries for the main unit.
- Stend: Allows the unit to stand upright on a flat surface.
- Devorga o'rnatish teshigi: For hanging the unit on a wall.
Tashqi simsiz sensor

Rasm: Old view of the Optex wireless outdoor temperature sensor. It has a small digital display showing the current temperature and channel, along with a red indicator light and a battery compartment on the back.
- Harorat sensori: Measures the outdoor temperature.
- Transmissiya ko'rsatkichi: A small LED light that flashes when data is transmitted.
- Batareya bo'limi: Houses the batteries for the outdoor sensor.
- Kanalni almashtirish: (Typically inside the battery compartment) Allows selection of a specific channel (1, 2, or 3) if using multiple sensors.
Sozlash; o'rnatish
- Install Batteries in the Outdoor Sensor:
- Simsiz sensorning orqa tomonidagi batareya bo'linmasini oching.
- Qutblanish belgilariga (+/-) muvofiq 2 ta AAA batareyasini (qo'shilmagan) joylashtiring.
- Batareya bo'linmasini yoping.
- Note: If there is a channel switch inside the compartment, ensure it is set to Channel 1 for initial setup.
- Install Batteries in the Main Display Unit:
- Open the battery compartment on the back of the main display unit.
- Qutblanish belgilariga (+/-) muvofiq 2 ta AAA batareyasini (qo'shilmagan) joylashtiring.
- Batareya bo'linmasini yoping.
- The display will light up and begin searching for the outdoor sensor.
- Sensorni ulash:
- Place the outdoor sensor and the main display unit close to each other during the initial setup.
- The main unit should automatically detect and connect to the outdoor sensor within a few minutes. The outdoor temperature will appear on the display.
- If the outdoor temperature does not appear, press and hold the "CH" button on the main unit for 3 seconds to initiate a manual search for the sensor.
- Tashqi datchikni joylashtirish:
- Choose a shaded location for the outdoor sensor, away from direct sunlight and rain, to ensure accurate readings.
- Avoid placing it near heat sources (e.g., vents, appliances) or metal objects that could interfere with the wireless signal.
- The maximum wireless range is approximately 30 meters (100 feet) in open air. Walls and obstacles will reduce this range.
Operatsiya
Reading Temperatures
The main display unit shows the indoor temperature at the top and the outdoor temperature (from the wireless sensor) at the bottom. Both displays show the current temperature, along with the recorded high (HI) and low (LO) temperatures for the day, and a trend indicator.
Switching Temperature Units (°C/°F)
ni bosing ° C/° F button once to switch between Celsius and Fahrenheit temperature units.
Clearing HI/LO Records
The thermometer automatically records the highest and lowest temperatures since the last reset. To clear these records and start new ones, press the TOZLASH button once. The HI/LO values will reset to the current temperature.
Channel Selection (for multiple sensors)
If you are using multiple outdoor sensors (sold separately), you can switch between their readings by pressing the CH button. Each press will cycle through the available channels (e.g., CH1, CH2, CH3). Ensure each sensor is set to a unique channel via its internal switch.
Xizmat
- Tozalash: Jihozlarni yumshoq mato bilan arting, damp mato. Abraziv tozalash vositalarini yoki erituvchilarni ishlatmang.
- Batareyani almashtirish: Replace batteries in both the main unit and the outdoor sensor when the low battery indicator appears on the display. Always replace all batteries at the same time with new ones of the same type.
- Saqlash: If storing the thermometer for an extended period, remove all batteries to prevent leakage. Store in a cool, dry place.
Muammolarni bartaraf qilish; nosozliklarni TUZATISH
| Muammo | Yechim |
|---|---|
| No outdoor temperature reading / "---" displayed. |
|
| Noto'g'ri harorat ko'rsatkichlari. |
|
| Displey xira yoki bo'sh. |
|
Texnik xususiyatlari
- Model: Optex 990047
- Displey turi: Raqamli LCD
- Ichki harorat oralig'i: -10°C dan 50°C gacha (14°F dan 122°F gacha) (Estimated, based on typical indoor thermometers)
- Tashqi harorat oralig'i: -40°C dan 60°C gacha (-40°F dan 140°F gacha) (Estimated, based on typical outdoor sensors)
- Haroratning aniqligi: +/- 1°C (+/- 2°F) (Taxminiy)
- Simsiz diapazoni: Up to 30 meters (100 feet) in open air (Taxminiy)
- Quvvat manbai (Asosiy blok): 2 x AAA 1.5V Batteries (not included)
- Quvvat manbai (tashqi sensor): 2 x AAA 1.5V Batteries (not included)
- Material: Plastik
- Rang: Qora
Xavfsizlik ma'lumotlari
- Do not expose the main unit or sensor to extreme temperatures, direct sunlight, or excessive moisture.
- Do not immerse the units in water. The outdoor sensor is weather-resistant but not waterproof.
- Do not attempt to disassemble or repair the units. This will void the warranty.
- Eski batareyalarni mahalliy qoidalarga muvofiq tarzda utilizatsiya qiling.
- Batareyalarni bolalar qo'li etmaydigan joyda saqlang.
Kafolat va qo'llab-quvvatlash
Optex products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Optex websayt. Qo'llab-quvvatlash xizmatiga murojaat qilganingizda model raqamingizni (990047) tayyorlab qo'ying.