Kirish
The Phanteks Eclipse G360A is a high-performance mid-tower gaming chassis designed for optimal airflow and component compatibility. It features an ultra-fine performance mesh front panel for superior cooling and dust filtration, integrated Digital-RGB lighting, and extensive support for modern gaming hardware including large GPUs and advanced liquid cooling solutions. This manual provides detailed instructions for setting up, operating, and maintaining your Eclipse G360A chassis.
O'rnatish va o'rnatish
1. Qutidan chiqarish va tarkib
Carefully remove the chassis from its packaging. Verify that all components and accessories are present. The package should include the Eclipse G360A chassis, pre-installed 120mm D-RGB fans, and an accessory box containing screws, zip ties, and the user manual.
2. Komponentlarning mosligi
- Anakartni qo'llab-quvvatlash: ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide).
- GPU uzunligi: Up to 400 mm (15.7 in).
- CPU sovutgichining balandligi: Up to 162 mm (6.3 in).
- Elektr ta'minoti bloki uzunligi: Up to 220 mm (280 mm depending on HDD cage location).
- Saqlash: 2x 3.5" internal (included), 3x 2.5" internal (2 included).
1-rasm: Ichki view highlighting 400mm GPU clearance, supporting high-end graphics cards.
Figure 2: Multiple storage options for 2.5" and 3.5" drives, with flexible mounting points.
3. O'rnatish bosqichlari
- Shassini tayyorlang: Remove the tempered glass side panel by unscrewing the thumb screws. The front panel can be detached for easier fan/radiator installation.
Figure 3: Detachable front panel and fan bracket for simplified installation.
- Anakartni o'rnatish: Secure your motherboard to the standoffs using the provided screws.
- Saqlash drayverlarini o'rnatish: Mount 2.5" SSDs to the dedicated locations behind the motherboard tray or on the PSU shroud. Install 3.5" HDDs into the drive cages located under the PSU shroud.
- Install Power Supply Unit (PSU): Slide the PSU into its designated compartment at the bottom rear of the chassis and secure it with screws.
- Grafik kartani (GPU) o'rnatish: Insert your graphics card into the PCIe slot on the motherboard. The chassis supports vertical GPU mounting with an optional bracket (PH-VGPUKT4.0_03).
- Install Cooling Components: The G360A supports various fan and radiator configurations.
- Muxlislarni qo'llab-quvvatlash: Front: 3x 120mm (3 pre-installed) or 2x 140mm; Top: 3x 120mm or 2x 140mm; Rear: 1x 120mm.
- Radiatorni qo'llab-quvvatlash: Front: Up to 360mm or 280mm; Top: Up to 360mm; Rear: 120mm. Note: Front and top 360mm radiators cannot be installed simultaneously.
Figure 4: Detailed fan and radiator placement options for optimal cooling.
- Kabelni boshqarish: Utilize the 36mm (1.4 in) cable management space behind the motherboard tray to route and secure cables for a clean build and improved airflow.
Foydalanish bo'yicha ko'rsatmalar
1. Front I/O Panel Functions
The front I/O panel provides convenient access to essential controls and ports:
- Quvvat tugmasi: Tizimni yoqadi yoki o'chiradi.
- 2 ta USB 3.0 portlari: USB qurilmalarini ulash uchun.
- Microphone/Headphone Combo Jack: Ovozni kiritish va chiqarish uchun.
- D-RGB Mode Button: Cycles through pre-programmed lighting effects.
- D-RGB Color Button: Changes the color of the D-RGB lighting.
Figure 5: Front I/O panel with easy-access controls for power, USB, audio, and D-RGB lighting.
2. Digital-RGB Lighting Control
The Eclipse G360A features integrated D-RGB lighting with pre-installed 120mm D-RGB fans and an LED strip along the tempered glass panel. The lighting can be controlled in two ways:
- Qo'lda boshqarish: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through various effects and colors without software.
- Anakart sinxronizatsiyasi: The D-RGB controller can be connected to a compatible motherboard's D-RGB header (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Razer Chroma). This allows for software control and synchronization with other D-RGB components in your system. Refer to your motherboard manual for D-RGB header location and software instructions.
Figure 6: Integrated D-RGB lighting and compatibility with major motherboard synchronization software.
Xizmat
1. Cleaning the Ultra-fine Performance Mesh
The front panel's ultra-fine mesh acts as a dust filter. To maintain optimal airflow and prevent dust buildup, regularly clean the mesh:
- Gently detach the front panel.
- Use a soft brush or compressed air to remove accumulated dust from the mesh.
- Wipe the mesh with a slightly damp cloth if necessary, ensuring it is completely dry before reattaching.
Figure 7: The ultra-fine performance mesh design, crucial for airflow and dust filtration.
2. General Chassis Cleaning
For general cleaning of the chassis exterior and interior:
- Tizim o'chirilgan va elektr tarmog'idan uzilganligiga ishonch hosil qiling.
- Use a microfiber cloth to wipe down exterior surfaces.
- For interior dust, use compressed air to blow dust out of components and the chassis.
- Clean the tempered glass panel with a glass cleaner and a soft cloth.
Muammolarni bartaraf qilish; nosozliklarni TUZATISH
Umumiy muammolar va yechimlar
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Tizim yoqilmaydi. | Loose power connections, faulty PSU, incorrect front panel header connection. | Check all power cables (24-pin, 8-pin CPU, GPU). Verify front panel power switch connection to motherboard. Test PSU if possible. |
| D-RGB lighting not working or incorrect. | Loose D-RGB cable connection, incorrect D-RGB header, software conflict. | Ensure D-RGB cables are securely connected. If using motherboard sync, verify connection to a 3-pin 5V D-RGB header (not 4-pin 12V RGB). Try manual control via case buttons. Reinstall or update motherboard RGB software. |
| Poor airflow or high temperatures. | Dust buildup, incorrect fan orientation, obstructed airflow. | Clean front mesh and other dust filters. Ensure fans are oriented correctly (intake/exhaust). Check for cable obstructions inside the case. |
| Front USB ports not functioning. | Loose USB 3.0 header cable connection to motherboard. | Verify the USB 3.0 cable from the front panel is securely connected to the motherboard's USB 3.0 header. |
Texnik xususiyatlari
| Xususiyat | Tafsilot |
|---|---|
| Model nomi | Eclipse G360A |
| Model raqami | PH-EC360ATG_DBK02 |
| Form faktor | Markaziy minorasi |
| Olchamlari (WxDxH) | 455 x 200 x 465 mm / 17.9 x 7.87 x 18.3 dyuym |
| Materiallar) | Steel Chassis, Tempered Glass |
| Anakartni qo'llab-quvvatlash | ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide) |
| Old I/U | 2x USB 3.0, Microphone/Headphone Combo, Power Button, D-RGB Mode, D-RGB Color |
| Kengaytirish uyalari | 7 |
| Ichki 3.5 dyuymli haydovchi uyalari | 2 (2x included) |
| Ichki 2.5 dyuymli haydovchi uyalari | 3 (2x included) |
| Oldindan o'rnatilgan fanatlar | 3x 120mm D-RGB (Front) |
| Fan Support (120mm) | Front: 3x; Top: 3x; Rear: 1x |
| Fan Support (140mm) | Front: 2x; Top: 2x |
| Radiator Support (120mm) | Front: Up to 360mm; Top: Up to 360mm; Rear: 120mm |
| Radiator Support (140mm) | Front: Up to 280mm; Top: Up to 360mm |
| Maksimal GPU uzunligi | 400 mm / 15.7 dyuym |
| CPU sovutgichining maksimal balandligi | 162 mm / 6.3 dyuym |
| Kabelni boshqarish maydoni | 36 mm / 1.4 dyuym |
| Maksimal PSU uzunligi | 220 mm / 280 mm (depends on HDD Cage location) |
Kafolat va qo'llab-quvvatlash
Kafolat haqida ma'lumot
Phanteks products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Phanteks websayt. Kafolat odatda oddiy foydalanish sharoitida materiallar va mahoratdagi nuqsonlarni qoplaydi.
Mijozlarni qo‘llab-quvvatlash
Should you encounter any issues or have questions regarding your Phanteks Eclipse G360A chassis, please contact Phanteks customer support. You can find contact information, FAQs, and additional resources on the official Phanteks websayt: