Phanteks Eclipse G500A DRGB Mid Tower Case User Manual

1. Mahsulot tugadiview

The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.

Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.

Asosiy xususiyatlar:

• High Airflow Design: Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
• Integrated D-RGB Lighting: Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
• Oldindan o'rnatilgan fanatlar: Includes three high-performance M25-140 D-RGB fans.
• Keng qamrovli sovutish yordami: Supports up to 420mm radiators in the front and 360mm in the top.
• Keng ichki makon: Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
• Moslashuvchan saqlash: Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
• Modern Front I/O: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.

2. O'rnatish va o'rnatish

This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.

2.1 Shassini tayyorlash

Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.

Figure 2: The removable front panel allows for easy installation of fans and radiators.

Figure 3: The removable top mesh panel facilitates fan and radiator installation.

2.2 Anakartni o'rnatish

The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.

2.3 Quvvat manbai (PSU) ni o'rnatish

Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).

2.4 Saqlash moslamasini o'rnatish

The case offers extensive storage options:

• 2.5 dyuymli SSD disklar: Up to 9 dedicated 2.5" drive bays are included.
• 3.5 dyuymli qattiq disklar: Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.

Figure 4: Multiple storage options for 2.5" and 3.5" drives.

2.5 Grafik kartani (GPU) o'rnatish

The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.

2.6 Sovutish tizimini o'rnatish

The chassis supports various fan and radiator configurations:

• Muxlislarni qo'llab-quvvatlash:
  • Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
  • Yuqori qismi: 3x 120 mm yoki 3x 140 mm
  • Orqa: 1x 120mm yoki 1x 140mm
• Liquid Cooling Radiator Support:
  • Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
  • Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
  • Orqa: 120 mm

Figure 5: High-end cooling compatibility with various fan and radiator sizes.

2.7 Kabelni boshqarish

The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.

2.8 O'rnatish videolari

3. Foydalanish bo'yicha ko'rsatmalar

3.1 Old kirish/chiqish paneli

The front I/O panel provides convenient access to essential ports and controls:

• Quvvat tugmasi: Tizimingizni yoqish/o'chirish uchun.
• USB 3.0 portlari (x2): USB 3.0 qurilmalarini ulash uchun.
• USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
• Microphone/Headphone Combo Jack: Ovozni kiritish va chiqarish uchun.
• D-RGB Mode Button: Cycles through pre-programmed D-RGB lighting effects.
• D-RGB Color Button: Changes the color of the D-RGB lighting.

Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.

3.2 D-RGB Lighting Control

The integrated D-RGB lighting can be controlled in two ways:

• Qo'lda boshqarish: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
• Anakart sinxronizatsiyasi: Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.

Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.

4. Xizmat ko'rsatish

Doimiy texnik xizmat ko'rsatish kompyuteringiz komponentlarining optimal ishlashini va uzoq umr ko'rishini ta'minlaydi.

• Chang filtrlash: The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
• Ichki tozalash: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Tashqi tozalash: Tashqi yuzalarni yumshoq mato bilan artib oling, damp mato. Abraziv tozalash vositalaridan yoki erituvchilardan saqlaning.

5. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Ushbu bo'lim sizning shaxsiy kompyuteringiz bilan bog'liq bo'lishi mumkin bo'lgan umumiy muammolarni ko'rib chiqadi.

5.1 Quvvat bilan bog'liq muammolar

• Tizim yoqilmayapti:
  • Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • PSU tugmasi "ON" holatida ekanligiga ishonch hosil qiling.
  • Check that the front panel power switch cable is correctly connected to the motherboard's F_PANEL header.

5.2 D-RGB Lighting Issues

• D-RGB not lighting up or incorrect colors:
  • Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
  • If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
  • Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
  • Try cycling through modes and colors using the front I/O buttons to rule out software issues.

5.3 Fan Noise or Malfunction

• Haddan tashqari fan shovqini:
  • Check for dust buildup on fan blades and clean if necessary.
  • Ensure fans are securely mounted and not vibrating against the chassis.
  • Verify fan speeds are controlled appropriately by the motherboard or fan controller.
• Ventilyator aylanmayapti:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure fan headers are enabled in the BIOS/UEFI settings.

6. Texnik shartlar

Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.

7. Kafolat va qo'llab-quvvatlash

Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks websayt yoki mijozlarga xizmat ko'rsatish bilan bog'laning.

Bog'lanish uchun ma'lumot:

• Websayt: www.phanteks.com
• Phanteks Taiwan Inc.: 11F., № 150, Jian 1st ko'chasi, Zhonghe tumani. Yangi Taypey shahri 235
• Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
• Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States

Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).