coobeast 13-Piece Preset Torque Screwdriver Set Instruction Manual

Kirish

This manual provides detailed instructions for the safe and effective use of your coobeast 13-Piece Preset Torque Screwdriver Set. Please read thoroughly before operation and retain for future reference.

Image: The complete coobeast 13-Piece Preset Torque Screwdriver Set, including the screwdriver, 12 S2 alloy steel bits, and a sturdy storage case.

Mahsulot komponentlari

• 1 x Preset Torque Screwdriver (1/4” magnetic bit holder)
• 12 x S2 Alloy Tool Steel Bits (various types and sizes)
• 1 x mustahkam saqlash qutisi

Rasm: yaqindan view of the preset torque screwdriver and the included S2 alloy steel bits, highlighting the 1/4" hex magnetic bit holder.

Setup and Torque Adjustment

1. To'g'ri bitni tanlang: Choose the appropriate S2 alloy steel bit for your application. The screwdriver features a 1/4” magnetic bit holder for quick and secure bit changes.

   Image: A user demonstrating the quick change feature of the magnetic bit holder by inserting a bit into the screwdriver.
2. Unlock Adjustment: Pull down the adjusting wheel located at the base of the screwdriver handle to unlock it.
3. Set Torque Value: Rotate the handle to the desired torque value. The main display screen and scale are easy to read, with a torque range of 10-70 in-lbs and an increment of 1 in-lb. The full circle rotation of the handle represents 10 in-lb. Align the red line on the main screen with the triangular pointer on the minute scale to set the precise value.

   Rasm: batafsil view of the torque adjustment mechanism, showing the major division scale and the handle for setting the desired inch-pound value.

   

   Image: A visual guide demonstrating how to unlock, rotate, and lock the handle to preset the torque value accurately.

4. Qulfni sozlash: Pull the adjusting wheel back up to lock the set torque value. This prevents accidental changes during use.

Foydalanish bo'yicha ko'rsatmalar

1. Momentni qo'llash: Begin tightening the fastener with the screwdriver.
2. "Click" Signal: When the preset torque value is reached, the screwdriver will emit an audible "click" sound. This indicates that the fastener has been tightened to the specified torque and prevents over-tightening.

   Image: The screwdriver in action, demonstrating the "click" sound signal upon reaching the preset torque, verified by a torque testing device.

3. Stop Tightening: Immediately stop applying force once the "click" is heard.

Xizmat

• Reset Torque: After each use, it is recommended to reset the torque setting to the lowest possible value (10 in-lb) or zero. This helps to relieve tension on the internal spring mechanism and maintain the tool's accuracy over time.
• Tozalash: Wipe the screwdriver and bits clean with a dry cloth after use. Do not use harsh chemicals or abrasive materials.
• Saqlash: Store the screwdriver and all bits in the provided sturdy storage case in a dry, cool place, away from direct sunlight and moisture.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter any issues with your coobeast Preset Torque Screwdriver, please consider the following:

• Inaccurate Torque: Ensure the torque setting is correctly locked after adjustment. If accuracy issues persist, the tool may require recalibration.
• Bits Slipping: Verify that the correct bit size is being used and that it is fully seated in the magnetic bit holder.
• No "Click" Sound: Confirm that the torque value is set above the minimum range. If the issue continues, contact customer support.

Texnik xususiyatlari

Rasmiy mahsulot videolari

Kafolat va qo'llab-quvvatlash

coobeast provides quality assurance for its products. If you encounter any difficulties in use or product issues, please feel free to contact our customer support. We are committed to providing practical protection and service for your choice.

For further assistance, please refer to the contact information provided with your product packaging or visit the official coobeast websayt.