Stetsom IR 400.1 BASS 2 Ohm raqamli pastki AmpFoydalanuvchi uchun qo'llanma

1. Kirish

This manual provides detailed instructions for the installation, operation, and maintenance of your Stetsom IR 400.1 BASS 2 Ohms Digital Sub Ampko'targich. Mahsulotning to'g'ri ishlashi va xavfsizligini ta'minlash uchun uni ishlatishdan oldin ushbu qo'llanmani diqqat bilan o'qib chiqing.

The Stetsom IR 400.1 BASS is a compact, high-fidelity mono amplifier designed specifically for subwoofers, offering 400 Watts RMS at 2 Ohms. It features advanced technology for defined mids and bass, along with adjustable crossovers and bass boost controls.

1.1-rasm: Old view of the Stetsom IR 400.1 BASS Digital Sub Amplifier, showing the "Iron Line" branding, Stetsom logo, model number, and power/speaker terminals.

2. Xavfsizlik ma'lumotlari

Shikastlanish yoki shikastlanmaslik uchun har doim quyidagi xavfsizlik choralariga rioya qiling ampko'targich va ulangan komponentlar:

• Ensure the vehicle's battery is disconnected before beginning any installation.
• ni o'rnating amplifier in a dry, well-ventilated location, away from direct sunlight and heat sources.
• Ushbu qo'llanmada ko'rsatilganidek, quvvat, yerga ulash va karnay ulanishlari uchun tegishli o'lchov simlaridan foydalaning.
• ni oshkor qilmang amplifier to moisture or liquids.
• Agar amplifier malfunctions or emits smoke, immediately disconnect power and consult a qualified technician.
• Bu amplifier is designed for 12V DC automotive systems only.

3. Mahsulot xususiyatlari

The Stetsom IR 400.1 BASS amplifier includes the following key features:

• Chiqish quvvati: 400 Watts RMS at 14.4V into 2 Ohms.
• Class D Monoblock Design: Dedicated for bass applications, stable at 2 Ohms.
• Audio boshqaruvlari:
  • Crossover (HPF): Adjustable from 5Hz to 35Hz.
  • Crossover (LPF): Adjustable from 35Hz to 250Hz.
  • Bass Boost: Gain adjustable up to +15dB, frequency range 35Hz to 60Hz.
• Yilni dizayn: New technology allows for a smaller footprint.
• Samarali sovutish: Powerful cooler for improved ventilation and extended use.
• Robust Connectors:
  • Power/Ground: 6mm² (approximately 10 AWG).
  • Remote: 0.75mm² (approximately 18 AWG).
  • Speakers: 2.5mm² (approximately 14 AWG).
  • Fuse: 30A.

4. Paket tarkibi

Paketni ochishda quyidagi narsalarning mavjudligini tekshiring:

• Stetsom IR 400.1 BASS Digital Sub Amphayotiyroq
• Foydalanuvchi uchun qo'llanma (ushbu hujjat)

Note: Additional accessories such as wiring kits, RCA cables, and subwoofers are sold separately.

5. O'rnatish va o'rnatish

To'g'ri o'rnatish optimal ishlash va xavfsizlik uchun juda muhimdir. Agar biron bir qadam haqida ishonchingiz komil bo'lmasa, professional avtomobil audio o'rnatuvchisiga murojaat qiling.

5.1 O'rnatish joyi

O'rnatish joyini tanlang:

• Dry and free from moisture.
• Issiqlik tarqalishini ta'minlash uchun yaxshi shamollatilgan.
• Secure, preventing movement during vehicle operation.
• Simlar va sozlash uchun mavjud.

5.2 Simli ulanishlar

Refer to the installation diagram below for correct wiring. Ensure all connections are secure and properly insulated.

5.1-rasm: Yuqori view of the Stetsom IR 400.1 BASS amplifier, highlighting the POWER, REM (remote), GND (ground) terminals, the FUSE 25A slot, and SPEAKER output terminals.

5.2-rasm: orqa view of the Stetsom IR 400.1 BASS amplifier, displaying the Bass Boost, Crossover, Input Level controls, RCA inputs, High Input terminals, and an integrated wiring diagram.

1. Power Connection (POWER): Connect a 6mm² (approx. 10 AWG) power cable from the vehicle's positive battery terminal to the amplifier's "POWER" terminal. Install a 30A fuse within 30cm (12 inches) of the battery.
2. Yerga ulanish (GND): Connect a 6mm² (approx. 10 AWG) ground cable from the amplifier's "GND" terminal to a clean, unpainted metal point on the vehicle's chassis. Ensure a solid electrical connection.
3. Masofadan yoqish (REM): Connect a 0.75mm² (approx. 18 AWG) remote wire from your head unit's remote output to the amplifier's "REM" terminal. This turns the ampbosh blokingiz bilan ko'targichni yoqing va o'chiring.
4. Speaker Connection (SPEAKERS): Connect your subwoofer(s) to the "SPEAKERS" terminals using 2.5mm² (approx. 14 AWG) speaker wire. Ensure the total impedance of the connected subwoofers is 2 Ohms or higher. Observe correct polarity (+ to + and - to -).
5. Audio Kirish (KIRISH):
   • RCA kiritish: RCA kabellarini bosh qurilmangizning sabvufer chiqishidan ulang amplifier's "INPUT L" and "INPUT R" RCA jacks.
   • Yuqori kirish: If your head unit does not have RCA outputs, use the high-level input. Connect the speaker outputs from your head unit to the "HIGH INPUT" terminals (+L/-L and +R/-R).

6. Foydalanish bo'yicha ko'rsatmalar

Bir marta amplifier is installed and wired correctly, you can adjust its settings for optimal sound performance.

6.1 Dastlabki quvvatlanish

Barcha ulanishlar amalga oshirilgandan so'ng, transport vositasining batareyasini qayta ulang. Bosh blokingizni yoqing. amplifier should power on, indicated by an illuminated LED (if present).

6.2 Adjusting Audio Controls

The Stetsom IR 400.1 BASS features several adjustable controls on its rear panel:

• INPUT LEVEL (MIN/MAX): Bu nazorat mos keladi amplifier's input sensitivity to the output level of your head unit. Start with the level at minimum, then slowly increase it until you hear distortion, then back off slightly.
• CROSSOVER (L.P.F. 35Hz ~ 250Hz): The Low Pass Filter (LPF) allows frequencies below the set point to pass through to the subwoofer. Adjust this to blend the subwoofer's output seamlessly with your main speakers. A common starting point is 80Hz-100Hz.
• CROSSOVER (H.P.F. 5Hz ~ 35Hz): The High Pass Filter (HPF) allows frequencies above the set point to pass. For subwoofers, this is typically used to filter out extremely low, inaudible frequencies that can waste amplifier power and potentially damage the subwoofer. Set it to the lowest useful frequency, often around 5Hz-10Hz.
• BASS BOOST (FREQ 35Hz ~ 60Hz, GAIN 0dB ~ +15dB): This control allows you to boost specific bass frequencies.
  • Tez -tez: Selects the center frequency for the bass boost.
  • GA: Adjusts the amount of boost applied to the selected frequency. Use sparingly to avoid distortion and potential damage to your subwoofer.

Recommendation: Make small adjustments and listen carefully to the sound. It is often best to set the gain and crossover points with test tones or familiar music to achieve the desired sound quality.

7. Xizmat ko'rsatish

The Stetsom IR 400.1 BASS ampYuk ko'targich minimal texnik xizmat ko'rsatishni talab qiladi. Uning uzoq umr ko'rishini ta'minlash uchun quyidagi ko'rsatmalarga amal qiling:

• ni saqlang ampYuk ko'targichni toza va chang va axlatdan tozalang. Tozalash uchun yumshoq, quruq matodan foydalaning.
• Atrofida etarli shamollatishni ta'minlang ampko'taruvchi. Sovutish qanotlarini yoki shamollatish teshiklarini to'sib qo'ymang.
• Barcha sim ulanishlarining zichligi va korroziyasini vaqti-vaqti bilan tekshirib turing. Bo'shashgan ulanishlar ishlash muammolariga yoki shikastlanishga olib kelishi mumkin.
• If the fuse blows, replace it only with a fuse of the same type and rating (30A). Using a fuse with a higher rating can lead to severe damage or fire.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Agar siz bilan bog'liq muammolar mavjud bo'lsa ampko'tarish moslamasini o'rnatishda, professional yordam so'rashdan oldin quyidagi muammolarni bartaraf etish qo'llanmasiga murojaat qiling:

9. Texnik shartlar

10. Kafolat va qo'llab-quvvatlash

Stetsom products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Stetsom websayt.

For further assistance, you may contact Stetsom customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.

Onlayn manbalar:

• Visit the Stetsom Store on Amazon
• Stetsom Official Websayt