Phanteks XT Pro Mid-Tower Gaming Chassis User Manual

1. Kirish

Thank you for choosing the Phanteks XT Pro Mid-Tower Gaming Chassis. This manual provides detailed instructions for the assembly, installation, and maintenance of your new PC case. The XT Pro is designed for high airflow performance, featuring a mesh front panel and tempered glass side panel, offering excellent cooling capabilities and a clear view of your internal components. It supports a wide range of hardware, including large graphics cards and extensive cooling solutions.

Figure 1.1: Phanteks XT Pro Mid-Tower Gaming Chassis, showcasing its sleek black design and tempered glass side panel.

2. Xavfsizlik ma'lumotlari

• Always disconnect the power supply from the wall outlet before performing any installation, cleaning, or maintenance.
• Handle tempered glass panels with care. They are fragile and can shatter if dropped or subjected to impact.
• Avoid exposing the chassis to extreme temperatures, humidity, or direct sunlight.
• Keep small components and screws out of reach of children.
• Ensure proper grounding to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
• Do not attempt to modify the chassis structure or components, as this may void your warranty and pose safety risks.

3. Paket tarkibi

Please verify that all items listed below are present in your package. If any items are missing or damaged, please contact Phanteks customer support.

• Phanteks XT Pro Mid-Tower Chassis
• Aksessuarlar qutisi (vintlar, fermuarlar, tayanchlar va boshqalar)
• Foydalanuvchi uchun qo'llanma (ushbu hujjat)
• (Optional, depending on model) 1x 120mm Fan

4. O'rnatish va o'rnatish

4.1 Shassini tayyorlash

Before installing components, remove the side panels. The tempered glass side panel is typically secured with thumbscrews at the rear. The solid steel side panel may also use thumbscrews or a latch mechanism.

4.1-rasm: View of the Phanteks XT Pro chassis with the tempered glass side panel installed.

4.2-rasm: Orqa ichki qism view of the chassis, showing cable management routes and drive mounting locations.

4.2 Anakartni o'rnatish

Install the necessary motherboard standoffs into the chassis tray according to your motherboard's form factor (ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard onto the standoffs, aligning the screw holes, and secure it with the provided motherboard screws.

4.3-rasm: ichki qism view of the Phanteks XT Pro with a motherboard, CPU cooler, and graphics card installed.

4.3 Quvvat manbai (PSU) ni o'rnatish

The PSU mounts at the bottom rear of the chassis. Slide your PSU into the designated bay from the rear and secure it with screws. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.

4.4 Saqlash diskini o'rnatish

The XT Pro supports multiple storage drives.

• 3.5 dyuymli qattiq disklar: PSU qopqog'i ostida joylashgan haydovchi katagiga o'rnating.
• 2.5 dyuymli SSD disklar: Mount to the dedicated SSD brackets behind the motherboard tray.

Figure 4.4: Diagram illustrating the locations for 3.5" HDDs and 2.5" SSDs within the chassis.

4.5 Grafik kartani (GPU) o'rnatish

Remove the necessary PCIe slot covers at the rear of the chassis. Insert your graphics card into the PCIe slot on the motherboard and secure it with the thumbscrew or latch mechanism. The XT Pro supports large graphics cards without compromise.

4.6 Ventilyator va radiatorni o'rnatish

The XT Pro offers extensive cooling support:

• Old: Up to 3x 120mm or 2x 140mm fans.
• Yuqori: Up to 3x 120mm or 2x 140mm fans, supporting up to a 360mm radiator.
• Orqa: 1x 120mm fan.
• Pastki: Up to 2x 120mm fans.

Install fans and radiators using the appropriate screws. Ensure correct airflow direction for optimal cooling.

Figure 4.5: Diagram showing fan and radiator mounting locations and supported sizes (120mm, 140mm, and radiator sizes).

4.7 Kabelni boshqarish

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics. Secure cables with zip ties or Velcro straps.

5. Shassi bilan ishlash

5.1 Old kirish/chiqish paneli

The front I/O panel is located on the top of the chassis and provides convenient access to essential ports and controls.

• Quvvat tugmasi: Tizimni yoqadi/o'chiradi.
• Qayta tiklash tugmasi: Tizimni qayta ishga tushiradi.
• USB 3.0 portlari: Yuqori tezlikda ma'lumotlarni uzatish uchun.
• USB-C 3.0 porti: For modern USB-C devices.
• Audio uyalar: Eshitish vositasi va mikrofon portlari.

5.1-rasm: Yaqindan view of the top I/O panel, indicating the Power Button, Reset Button, USB 3.0, USB-C 3.0, and Audio/Microphone jacks.

6. Xizmat ko'rsatish

Doimiy texnik xizmat ko'rsatish kompyuteringiz komponentlarining optimal ishlashini va uzoq umr ko'rishini ta'minlaydi.

• Chang filtrlari: The XT Pro features an ultra-fine performance mesh front panel and a top dust filter. Regularly clean these filters to maintain optimal airflow. They can typically be removed and cleaned with compressed air or a soft brush.
• Tashqi tozalash: Tashqi yuzalarni yumshoq mato bilan artib oling, damp mato. Abraziv tozalash vositalaridan yoki erituvchilardan saqlaning.
• Ichki tozalash: Periodically use compressed air to remove dust buildup from internal components like fans, heatsinks, and circuit boards. Ensure the system is powered off and unplugged before cleaning.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Ushbu bo'lim siz duch kelishi mumkin bo'lgan umumiy muammolarni ko'rib chiqadi.

• Tizim yoqilmayapti:
  • Check all power connections: PSU to wall, PSU to motherboard, and front panel power switch cable to motherboard.
  • Ensure the PSU switch is in the "ON" position.
• Displey chiqishi yo'q:
  • Verify that the monitor cable is securely connected to the graphics card (or motherboard, if using integrated graphics).
  • Grafik karta va RAM modullarini qayta joylashtiring.
• Haddan tashqari shovqin:
  • Check if any fan cables are obstructing fan blades.
  • Ensure all fans are securely mounted.
  • Clean dust from fans and filters.
• Poor airflow/high temperatures:
  • Barcha chang filtrlarini va ichki qismlarni tozalang.
  • Verify correct fan orientation (intake/exhaust).
  • Ensure no cables are blocking airflow paths.

For further assistance, please refer to the Phanteks support websayt yoki mijozlarga xizmat ko'rsatish bilan bog'laning.

8. Texnik shartlar

8.1-rasm: o'lchamliview of the Phanteks XT Pro chassis.

9. Kafolat va qo'llab-quvvatlash

Phanteks products come with a limited warranty. Please refer to the official Phanteks website for the most up-to-date warranty information and terms specific to your region.

For technical support, product registration, or to download the latest drivers and manuals, please visit the official Phanteks support page:www.phanteks.com/support.html

When contacting support, please have your product model number (PH-XT523P1_BK01) and purchase information ready.