Kirish
The FlyRobo BM730 is a compact 3-in-1 digital meter designed to measure DC voltage, current, and power simultaneously. It features a clear 4-digit LED display for easy reading and is suitable for monitoring battery levels, solar panels, and other DC systems. This manual provides essential information for safe and effective operation.
Xavfsizlik ma'lumotlari
- Always ensure proper wiring connections before applying power.
- Belgilangan hajmdan oshmangtage (0-100V DC) and current (10A) limits.
- Avoid contact with live circuits.
- This device is intended for DC circuits only.
- Bolalar qo'li etmaydigan joyda saqlang.
Paket tarkibi
Barcha elementlar mavjudligini tekshiring:
- 1x FlyRobo BM730 3-in-1 Voltage Current Power Meter
- 1x Wiring Harness for Power Supply (Thin Red/Black Wires)
- 1x Wiring Harness for Current Measurement (Thick Red/Black Wires)
Image: The BM730 meter shown with its two included wiring harnesses. One harness has thin red and black wires for power, and the other has thicker red and black wires for current measurement.
Mahsulot tugadiview
The BM730 meter features a multi-color LED display and control buttons for operation.
Rasm: yuqori view showing the digital display for voltage (V), current (A), and power (W), along with control buttons (Up, M, Down, R). Bottom view shows the circuit board with connection terminals.
Displey ko'rsatkichlari:
- V (Volts): Red display, indicates DC voltage.
- A (Amperes): Green display, indicates DC current.
- W (Watts): Blue display, indicates DC power.
Boshqarish tugmalari:
- Yuqoriga o'q: Used for navigation or increasing values.
- M (Rejim): Used to switch display modes or confirm settings.
- Pastga o'q: Used for navigation or decreasing values.
- R (Reset): Used to reset readings or settings.
Texnik xususiyatlari
- jildtage diapazoni: 0V dan 100V gacha bo'lgan doimiy oqim
- Joriy diapazon: 0A to 10A DC
- Quvvat diapazoni: 0W to 1000W (calculated from V*A)
- Displey: 4-Digit LED (Red for V, Green for A, Blue for W)
- Olchamlari (U x G x Y): 80 mm x 41 mm x 26 mm
- O'lchov turi: Ammeter, Voltmeter, Wattmeter
- Quvvat manbai: Battery Powered (self-powered from measured circuit or external supply)
O'rnatish va o'rnatish
Proper wiring is critical for the safe and accurate operation of the BM730 meter. Refer to the diagram below for connection details.
Simli ulanishlar:
- Power Supply for Meter (Thin Red/Black Wires):
Connect the thin red wire to the positive (+) terminal of your DC power source (0-100V).
Connect the thin black wire to the negative (-) terminal of your DC power source.
Note: The meter can be self-powered from the circuit it is measuring, or powered by a separate supply within its voltage diapazoni.
- Current Measurement (Thick Red/Black Wires):
The thick red wire (IN+) and thick black wire (OUT-) are for current measurement. These wires must be connected in series with the load you wish to measure.
Connect the thick red wire (IN+) to the positive side of the load.
Connect the thick black wire (OUT-) to the negative side of the load, completing the circuit back to the power source.
Muhim: Do not connect the thick current wires directly across the power source; this will short the circuit and damage the meter or power source.
Qisqa tutashuvlarni oldini olish uchun barcha ulanishlar xavfsiz va izolyatsiyalanganligiga ishonch hosil qiling.
Foydalanish bo'yicha ko'rsatmalar
- Yoqilgan: Once correctly wired, apply power to the circuit. The meter's display will illuminate, showing voltagelektron, oqim va quvvat ko'rsatkichlari.
- O'qish ekrani:
The top red display shows voltage Voltda (V).
The middle green display shows current in Amperes (A).
The bottom blue display shows power in Watts (W).
- Tugma funktsiyalari:
The buttons (Up, M, Down, R) are typically used for fine adjustment, calibration, or alarm settings. Refer to specific advanced usage guides if available for detailed button functionalities. For basic operation, the meter displays readings automatically.
- Haddan tashqari kuchlanishtage/Overcurrent Alarm: The meter supports an overvoltage and overcurrent sound alarm function. If the measured values exceed preset thresholds, an audible alarm may sound.
Xizmat
- Keep the meter clean and dry. Use a soft, dry cloth to wipe the display and casing.
- Hisoblagichni haddan tashqari harorat, namlik yoki korroziy muhitlarga ta'sir qilishdan saqlaning.
- c ni ochishga urinmangasing or modify the internal circuitry, as this will void any warranty and may cause damage.
- Foydalanilmayotganda xavfsiz joyda saqlang.
Muammolarni bartaraf qilish; nosozliklarni TUZATISH
- Hisoblagich yoqilmaydi:
- Check the thin red and black power supply wires. Ensure they are correctly connected to a DC power source within the 0-100V range. Verify the power source is active.
- jildtage displays, but current/power shows 0:
- Ensure the thick red (IN+) and black (OUT-) current measurement wires are correctly connected in series with the load. The load must be drawing current for a reading to appear.
- Noto'g'ri o'qishlar:
- Verify all connections are secure and free from corrosion. Ensure the meter is operating within its specified voltage va joriy diapazonlar.
- Audible alarm sounds:
- This indicates an overvoltage or overcurrent condition. Check your circuit for excessive voltage or current draw and adjust as necessary.
Kafolat va qo'llab-quvvatlash
For warranty information or technical support, please contact FlyRobo directly. Refer to your purchase documentation for specific warranty terms.
Ishlab chiqaruvchining aloqa ma'lumotlari: flyroboofficial@gmail.com