1. Kirish
The Einhell TC-MT 150 E is a versatile grinding and engraving tool designed for a wide range of applications, including engraving, polishing, milling, grinding, cutting, and brushing. This tool features a 150 W motor and a 6-level electronic speed control, allowing for flexible adjustment of the rotational speed from 10,000 to 35,000 revolutions per minute (rpm) to suit various materials and tasks. The integrated spindle lock system facilitates quick and easy accessory changes. For detailed and intricate work, a 100 cm flexible shaft is included, equipped with a slim, soft-grip engraving tip for optimal handling and precise results. The device comes with a practical stand that provides storage for the flexible shaft and tip, as well as a tray for frequently used accessories. The stand can be wall-mounted or positioned stably on a workbench using its rubber feet. A cable winding device is integrated into the stand for neat storage. A comprehensive kit of 117 accessories is supplied, offering extensive possibilities for diverse applications.
2. Xavfsizlik bo'yicha ko'rsatmalar
Always observe the following safety precautions when operating the Einhell TC-MT 150 E tool:
- Qo'llanmani to'liq o'qing: Before use, thoroughly read and understand all instructions and safety warnings.
- Shaxsiy himoya vositalarini (PPE) taqinglar: Always wear safety glasses, hearing protection, and a dust mask. Gloves are recommended for handling accessories and workpieces.
- Xavfsiz ish qismi: Ish qismi mahkam cl ekanligiga ishonch hosil qilingamped yoki ish paytida harakatni oldini olish uchun xavfsiz.
- Ish joyini toza tuting: Keep your workspace tidy and well-lit. Cluttered or dark areas invite accidents.
- Tasodifiy boshlashdan saqlaning: Ensure the switch is in the OFF position before plugging in the tool or changing accessories.
- Use correct accessories: Only use accessories designed for this tool and suitable for the task. Ensure accessories are correctly installed and tightened.
- Haddan tashqari ko'tarmang: Har doim to'g'ri oyoq va muvozanatni saqlang.
- Quvvatni uzing: Har qanday sozlash, aksessuarlarni almashtirish yoki texnik xizmat ko'rsatishdan oldin har doim asbobni quvvat manbaidan uzing.
- Xavfsiz saqlang: When not in use, store the tool and accessories in a dry, secure place out of reach of children.
3. Paket tarkibi
Paketni ochishda barcha narsalar mavjudligini tekshiring:
- Einhell TC-MT 150 E Grinding and Engraving Tool
- Flexible Shaft (100 cm)
- Qurilma stendi
- 117-piece Accessory Kit
- Operatsion qo'llanma
4. Mahsulot tugadiview
Familiarize yourself with the main components of your Einhell TC-MT 150 E tool.
5. Sozlash
- Paketdan chiqarish: Carefully remove all components from the packaging. Inspect for any damage. Keep packaging materials for future storage or transport.
- Positioning the Device Stand: Place the device stand on a stable, flat workbench. The rubber feet will help prevent slipping. Alternatively, the stand can be wall-mounted using appropriate fasteners (not included) through the designated holes.
- Attaching the Flexible Shaft:
- Ensure the main tool is unplugged.
- Press and hold the spindle lock button (Figure 4).
- Unscrew the collet nut from the main tool's spindle.
- Insert the inner drive cable of the flexible shaft into the main tool's spindle.
- Screw the flexible shaft's coupling nut onto the main tool's housing until secure. Do not overtighten.
- Milni qulflash tugmachasini bo'shating.
- Aksessuarlarni joylashtirish:
- Asbobning elektrdan uzilganligiga ishonch hosil qiling.
- Milni qulflash tugmasini bosing va ushlab turing.
- Unscrew the collet nut on the main tool or the flexible shaft's handpiece.
- Insert the desired accessory shank into the collet. Ensure the shank is fully seated.
- Tighten the collet nut firmly. Release the spindle lock button.
- Muhim: Always use the correct collet size for the accessory shank. The kit includes various collets.
6. Foydalanish bo'yicha ko'rsatmalar
- Quvvat ulanishi: Plug the tool into a suitable power outlet (230 V AC).
- Yoqish/o‘chirish: Use the ON/OFF switch located on the main unit to start or stop the tool.
- Tezlikni sozlash: Rotate the 6-level electronic speed control dial (Figure 3) to select the desired RPM. Start with a lower speed and gradually increase it as needed for the material and application. Refer to the accessory's recommendations for optimal speed settings.
- Using the Flexible Shaft: When using the flexible shaft, ensure it is not kinked or sharply bent during operation, as this can cause damage. Hold the handpiece firmly and guide the accessory smoothly over the workpiece.
- Umumiy foydalanish bo'yicha maslahatlar:
- Apply light, consistent pressure. Excessive force can damage the tool, accessory, or workpiece.
- Move the tool continuously to prevent overheating the workpiece or accessory.
- For best results, practice on scrap material before working on your final project.
- Ish qismiga tegmasdan oldin asbob to'liq tezlikka chiqishiga ruxsat bering.
7. Xizmat ko'rsatish
Doimiy parvarishlash asbobingizning uzoq umr va optimal ishlashini ta'minlaydi.
- Tozalash: After each use, unplug the tool and clean the housing with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Use compressed air to clear dust from ventilation openings.
- Aksessuarlarni parvarish qilish: Inspect accessories before and after each use for wear or damage. Replace worn or damaged accessories immediately. Store accessories in their designated compartments in the kit to prevent damage.
- Moslashuvchan mil: Periodically check the flexible shaft for any signs of wear or damage to the outer casing or inner cable. If damage is found, discontinue use and replace the shaft.
- Kabel tekshiruvi: Regularly inspect the power cable for cuts, fraying, or other damage. A damaged cable must be replaced by a qualified electrician.
8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
Muammolarga duch kelsangiz, quyidagi umumiy muammolar va echimlarga murojaat qiling:
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Asbob ishga tushmaydi | No power supply; ON/OFF switch is off; Faulty power cable | Check power connection; Ensure switch is ON; Inspect power cable for damage. |
| Accessory wobbles or vibrates excessively | Accessory not properly inserted or tightened; Incorrect collet size; Damaged accessory | Re-insert and tighten accessory; Use correct collet; Replace damaged accessory. |
| Asbob haddan tashqari qizib ketadi | Excessive pressure; Blocked ventilation slots; Continuous heavy use | Reduce pressure; Clean ventilation slots; Allow tool to cool down. |
| Ishlashning pasayishi | Worn accessory; Incorrect speed setting; Motor issue | Replace accessory; Adjust speed; If problem persists, contact customer support. |
If you cannot resolve the issue using this guide, please contact Einhell customer support.
9. Texnik shartlar
Technical data for the Einhell TC-MT 150 E Grinding and Engraving Tool:
| Xususiyat | Spetsifikatsiya |
|---|---|
| Model raqami | 4419380 |
| Quvvat kiritish | 150 Vt |
| jildtage | 230 volt (AC) |
| Max. No-Load Speed | 35,000 aylanish tezligi |
| Min. No-Load Speed | 10,000 aylanish tezligi |
| Tezlikni nazorat qilish | 6-level electronic variator |
| Moslashuvchan mil uzunligi | 100 sm |
| Olchamlari (U x G x Y) | 30.1 x 22.7 x 13.4 sm |
| Og'irligi | 560 gramm |
| Kiritilgan aksessuarlar | 117 qismli to'plam |
| Ishlab chiqaruvchi mamlakat; ta'minotchi mamlakat | Xitoy |
10. Kafolat va qo'llab-quvvatlash
Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty in accordance with country-specific regulations. Please retain your proof of purchase for any warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell website. Contact information can typically be found in the original packaging or on the Einhell brand websayt.
EU Spare Parts Availability: 1 yil