Kirish
Thank you for choosing the SHALL 2-in-1 Cordless Electric Hedge Trimmer and Grass Shear. This versatile tool is designed for efficient and precise trimming of hedges, bushes, and grass edges in your garden. This manual provides essential information for safe operation, proper setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Xavfsizlik bo'yicha muhim ko'rsatmalar
Always read and understand all safety warnings and instructions before operating this tool. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Shaxsiy xavfsizlik: Always wear appropriate personal protective equipment, including safety glasses, gloves, and sturdy footwear. Keep children and bystanders away while operating the tool.
- Dual Safety Design: This tool features a two-way safety lock. To start the device, the safety key on the rear strap must be inserted, and the side lock must be engaged simultaneously. This design prevents accidental activation.
- Ish maydoni: Ensure the work area is clear of obstacles, debris, and other people. Do not operate in wet conditions or near flammable liquids or gases.
- Batareya parvarishi: Use only the specified charger and battery. Do not expose the battery to extreme temperatures or direct sunlight.
- Pichoq bilan ishlov berish: Blades are sharp. Handle with extreme care. Always disconnect the battery before changing or cleaning blades.
- Xizmat: Regularly inspect the tool for damage. Do not use if any part is damaged. Keep blades clean and sharp for best performance and safety.
Mahsulot tugadiview
The SHALL 2-in-1 Cordless Electric Hedge Trimmer and Grass Shear is a compact and powerful tool designed for various garden tasks. It features interchangeable blades for grass shearing and hedge trimming, powered by a 7.2V Li-ion battery.
Asosiy xususiyatlar:
- 2-in-1 funksionalligi: Easily switch between grass shearing and hedge trimming.
- Kuchli ishlash: Equipped with a 2000 mAh Li-ion battery and a motor providing 1100 RPM no-load speed for efficient cutting.
- Tez zaryadlash: Fully charges in approximately one hour using the included Type-C cable.
- Ergonomik dizayn: Lightweight (approximately 1.5 lbs / 0.68 kg) with an anti-slip rubber grip for comfortable extended use.
- Aylanadigan bosh: The trimmer head can be rotated 180 degrees for precise cutting angles.
- Bardoshli pichoqlar: High-quality alloy steel blades ensure sharpness and durability.
Sozlash; o'rnatish
1. Batareyani zaryadlash
Before first use, fully charge the battery. The battery is integrated into the tool.
- Connect the Type-C cable to the charging socket on the tool.
- Zaryadlovchini standart rozetkaga ulang.
- The LED indicator will show the charging status. A full charge typically takes about one hour.
- To'liq zaryadlangandan so'ng, zaryadlovchini ajratib oling.
2. Attaching/Changing Blades
The tool comes with two interchangeable blades: a grass shear blade and a hedge trimmer blade.
- Ensure the tool is OFF and the safety key is removed.
- Locate the blade quick-release button on the side of the tool.
- Press and hold the quick-release button.
- Carefully remove the currently attached blade by sliding it off.
- Align the desired blade (grass shear or hedge trimmer) with the slot on the tool.
- Slide the new blade into place until it clicks securely. Release the quick-release button.
- Gently pull on the blade to ensure it is firmly attached before use.
Foydalanish bo'yicha ko'rsatmalar
Always ensure the battery is sufficiently charged and the correct blade is installed for your task.
1. Activating the Tool (Dual Safety)
- Insert the safety key into its slot on the rear strap of the tool.
- Press and hold the side safety lock button.
- While holding the safety lock, press the ON/OFF trigger button to start the tool.
- Release the safety lock button once the tool is running. The tool will continue to operate as long as the ON/OFF trigger is pressed.
2. Maysa qirqish pichog'idan foydalanish
The grass shear blade is ideal for trimming grass edges and small areas of lawn.
- Hold the tool firmly with both hands if possible, or one hand if comfortable and safe.
- Position the grass shear blade parallel to the ground or desired cutting line.
- Move the tool steadily along the grass, allowing the blades to cut cleanly.
- Avoid forcing the tool through thick patches of grass to prevent stalling or damage.
3. To'siq qirqish pichog'idan foydalanish
The hedge trimmer blade is suitable for shaping small hedges and bushes.
- Asbobni mahkam ushlang.
- For optimal results, use a sweeping motion, cutting small amounts of material at a time.
- The trimmer head can be rotated 180 degrees to adjust the cutting angle for different hedge shapes and accessibility. To rotate, ensure the tool is off, then gently twist the blade assembly.
- Do not attempt to cut branches thicker than the maximum cutting thickness (approximately 7.95mm).
Xizmat
Regular maintenance ensures the longevity and safe operation of your SHALL 2-in-1 tool.
- Tozalash pichoqlari: After each use, ensure the tool is OFF and the battery is disconnected. Carefully clean the blades with a brush to remove sap, grass, and debris. A damp cloth can be used for the tool body.
- Moylash: Apply a light machine oil or blade lubricant to the blades periodically to reduce friction and prevent rust.
- Saqlash: Store the tool in a dry, secure place, out of reach of children. Ensure the blades are clean and dry before storage.
- Batareyani saqlash: If storing for extended periods, charge the battery to approximately 50% and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
Muammolarni bartaraf qilish; nosozliklarni TUZATISH
If you encounter issues with your tool, refer to the following common problems and solutions:
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Asbob ishga tushmaydi | Batareya zaryadlanmagan Xavfsizlik kaliti kiritilmagan Safety lock not engaged correctly | Batareyani zaryadlang Insert the safety key fully Ensure both safety lock and trigger are pressed simultaneously |
| Pichoqlar samarali tarzda kesilmayapti | Pichoqlar xira yoki iflos Material being cut is too thick | Clean and lubricate blades; consider sharpening or replacing if very dull Do not attempt to cut material exceeding maximum thickness |
| Ish paytida asbob to'xtaydi | Batareya quvvati past Haddan tashqari yuk himoyasi faollashtirilgan | Batareyani qayta zaryadlang Reduce the load on the blades; clear any jammed material |
Agar ushbu echimlarni sinab ko'rganingizdan keyin muammo davom etsa, mijozlarni qo'llab-quvvatlash xizmatiga murojaat qiling.
Texnik xususiyatlari
| Xususiyat | Spetsifikatsiya |
|---|---|
| Brend | Shall |
| Model | SH112015EU |
| Quvvat manbai | Batareyadan quvvatlanadi |
| Batareya turi | 7.2V 2000 mA / soat Li-ion |
| Yuksiz tezlik | 1100 aylanish tezligi |
| Maysa kesish kengligi | 82 mm (3.2 dyuym) |
| Hedge Trimmer Cutting Area | 140 x 60 mm (5.5 x 2.4 dyuym) |
| Max Hedge Trimmer Cutting Thickness | 42 mm (1.65 inches) / 7.95 mm (0.31 inches) for branches |
| Pichoq materiali | Qotishma po'lat |
| Mahsulot o'lchamlari (U x G x Y) | 28L x 12W x 9H sm (11L x 4.7W x 3.5H dyuym) |
| Element og'irligi | Approx. 0.68 kg (1.5 lbs) - tool only |
| Zaryadlash vaqti | Taxminan 1 soat |
| Runtime (full charge) | Taxminan 100 daqiqa |
Kafolat va qo'llab-quvvatlash
SHALL products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official SHALL website. If you have any questions, require technical assistance, or need to report a defect, please contact SHALL customer support through the retailer where you purchased the product or directly via the manufacturer's contact channels.
Iltimos, kafolat da'volari uchun sotib olinganligingizni tasdiqlovchi hujjatingizni saqlab qo'ying.