Okin JLDQ.18.137.333D01

Okin JLDQ.18.137.333D01 Power Recliner Motor Replacement Manual

Model: JLDQ.18.137.333D01

Kirish

This manual provides detailed instructions for the installation, operation, and maintenance of the Okin JLDQ.18.137.333D01 motor, designed as a replacement part for power recliner lift chairs. Please read this manual thoroughly before attempting any installation or operation to ensure safe and correct usage.

Xavfsizlik ma'lumotlari

  • Always disconnect power to the recliner before attempting any installation, removal, or maintenance of the motor. Failure to do so can result in electric shock or injury.
  • Quvvatni tiklashdan oldin barcha ulanishlar xavfsiz va to'g'ri yo'naltirilganligiga ishonch hosil qiling.
  • This motor is designed for specific power recliner lift chairs. Verify compatibility with your existing recliner model before installation.
  • Ish paytida qo'llaringizni va keng kiyimlaringizni harakatlanuvchi qismlardan uzoqroq tuting.
  • Agar biron bir qadamga ishonchingiz komil bo'lmasa, malakali texnik bilan maslahatlashing.

Paket tarkibi

Paketga quyidagi elementlar kiradi:

  • 1 x Okin JLDQ.18.137.333D01 Refined Motor
Okin JLDQ.18.137.333D01 motor with attached cables

Image: The Okin JLDQ.18.137.333D01 motor assembly, showing the main motor unit, linear actuator rod, and attached power and control cables.

Mahsulot tugadiview

The Okin JLDQ.18.137.333D01 is a linear actuator motor designed for power recliner and lift chair applications. It features a robust construction and specific connection types for integration into existing systems.

Close-up of Okin JLDQ.18.137.333D01 motor label with specifications

Rasm: yaqindan view of the motor's identification label, displaying the model number JLDQ.18.137.333D01, voltage, maximum load, stroke, duty cycle, and various certifications (CE, cURus, TÜV Rheinland, FCC).

Ulanish turlari:

  • Power Transformer Connection: 2-pin flat round male plug. This connects to the power supply unit.
  • Hand Control Connection: 5-pin female plug. This connects to the recliner's hand control unit.
Batafsil view of the 5-pin female plug for hand control and 2-pin flat round male plug for power transformer

Rasm: batafsil view of the motor's connection cables, highlighting the 5-pin female plug for the hand control and the 2-pin flat round male plug for the power transformer connection.

O'rnatish va o'rnatish

This section outlines the general steps for replacing an existing recliner motor. Always refer to your recliner's specific manual for detailed disassembly and assembly instructions.

  1. Quvvatni uzish: Unplug the recliner from the wall outlet to ensure no power is supplied to the motor or controls.
  2. Motorga kirish: Carefully turn the recliner over or tilt it to gain access to the underside where the motor is located. You may need to remove fabric covers or panels.
  3. Ulanishlarni aniqlang: Note the connections of the existing motor. Typically, there will be a power connection from the transformer and a control connection from the hand remote.
  4. Eski dvigatelni ajratib oling: Disconnect the 2-pin power plug and the 5-pin hand control plug from the old motor.
  5. Eski dvigatelni olib tashlang: Unbolt or unclip the old motor from the recliner frame. Pay attention to how it is mounted.
  6. Yangi motorni o'rnatish: Position the new Okin JLDQ.18.137.333D01 motor in the same location as the old one. Secure it using the existing bolts or clips. Ensure it is firmly attached.
  7. Yangi motorni ulang:
    • Connect the 2-pin flat round male plug from the power transformer to the corresponding port on the new motor.
    • Connect the 5-pin female plug from the hand control to the corresponding port on the new motor.
  8. Kabelni boshqarish: Route all cables safely, ensuring they are not pinched or in the way of moving parts. Use cable ties if necessary.
  9. Quvvatni tiklash: Once all connections are secure and the motor is properly mounted, plug the recliner back into the wall outlet.
  10. Sinov operatsiyasi: Use the hand control to test the recliner's functions (recline, lift). Ensure smooth and correct movement.
  11. Eslatma: Before replacing the motor, always troubleshoot the switch and power supply first. Verify that the new motor's plug types match your recliner's connections.

Foydalanish bo'yicha ko'rsatmalar

After successful installation, operate your recliner using the existing hand control unit. The Okin JLDQ.18.137.333D01 motor will respond to the commands from your hand control to adjust the recliner's position.

  • Press and hold the appropriate button on your hand control to recline or lift the chair.
  • Istalgan holatga kelganda tugmani qo'yib yuboring.
  • Avoid continuous operation for extended periods. The motor has a duty cycle of 1 minute ON / 8 minutes OFF to prevent overheating.

Xizmat

Proper maintenance ensures the longevity and reliable operation of your Okin motor.

  • Tozalash: Keep the motor and surrounding area free from dust and debris. Use a dry cloth to wipe down the motor housing. Do not use liquid cleaners directly on the motor.
  • Tekshirish: Periodically inspect all cables and connections for signs of wear, fraying, or damage. Ensure all mounting bolts are tight.
  • Moylash: The linear actuator rod is typically pre-lubricated. If you notice stiffness or unusual noise, a light application of silicone-based lubricant (avoid petroleum-based products) to the moving rod may be beneficial, but consult a professional if unsure.
  • Duty Cycle Adherence: Respect the motor's duty cycle (1 minute ON / 8 minutes OFF) to prevent overheating and premature wear.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If your recliner is not operating correctly after motor replacement, consider the following common issues:

MuammoMumkin sababYechim
Motor does not respond.No power, loose connections, faulty hand control, faulty power supply.
  • Kreslo ishlaydigan rozetkaga ulanganligini tekshiring.
  • Ensure all 2-pin and 5-pin connections are fully seated.
  • Test the hand control and power supply if possible (e.g., with another recliner or by checking indicator lights).
Motor operates slowly or with difficulty.Low power, obstruction, motor overload, worn components.
  • Elektr ta'minotini tekshiringtage.
  • Inspect for any obstructions preventing smooth movement of the recliner mechanism.
  • Ensure the recliner is not overloaded beyond its weight capacity.
Motordan g'ayrioddiy shovqinlar.Lack of lubrication, foreign object, internal motor issue.
  • Inspect for foreign objects near the motor or linear rod.
  • Consider light lubrication of the linear rod (see Maintenance section).
  • If noise persists, the motor may require professional inspection.

Agar muammoni bartaraf etish bo'yicha choralar muammoni hal qilmasa, qo'shimcha yordam uchun mijozlarni qo'llab-quvvatlash xizmatiga murojaat qiling.

Texnik xususiyatlari

XususiyatTafsilot
Model raqamiJLDQ.18.137.333D01
IlovaPower Recliner Lift Chairs
Strok uzunligi333 mm (13.11 dyuym)
Minimal o'rnatish hajmi (kichraytirish)137 mm (5.40 dyuym)
Maksimal o'rnatish hajmi470 mm (18.5 dyuym)
Yuk (bosish kuchi)750 N
Yuk (tortish kuchi)750 N
Power Transformer Connection2 Pin Flat Round Male Plug
Qo'l bilan boshqarish ulanishi5 Pin Female Plug
Ish aylanishi1 daqiqa YOQILGAN / 8 minut O'CHIRILGAN
Element og'irligi4.79 funt
Paket o'lchamlari23.5 x 8.5 x 6 dyuym
Graphic showing product features and dimensions of the Okin JLDQ.18.137.333D01 motor

Image: A graphic summarizing the key product features and specifications, including stroke length, minimum and maximum dimensions, and connection types, alongside an image of the motor.

Kafolat va qo'llab-quvvatlash

For warranty information or technical support regarding your Okin JLDQ.18.137.333D01 motor, please refer to the documentation provided with your original recliner or contact Okin customer service directly. You can often find support contact information on the manufacturer's websayt yoki mahsulot sotuvchisi orqali.

Patent haqida ma'lumot olish uchun tashrif buyuring dewertokin.com/patents.

© 2025 Okin. Barcha huquqlar himoyalangan.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.