VOTOL Controller USB Data Cable Instruction Manual

1. Kirish

This instruction manual provides essential information for the proper use and configuration of the VOTOL Controller USB Data Cable. This cable is designed to facilitate parameter adjustment and programming for specific VOTOL motor controller models, ensuring optimal performance and customization of your motor system.

The cable features a PL2303 chipset for reliable data communication between your computer and the VOTOL EM series motor controllers, including EM30, EM50, EM80, EM100, EM150, and EM180S.

2. Moslik

This USB Data Cable is specifically compatible with the following VOTOL motor controller series:

• VOTOL EM30 Controller
• VOTOL EM50 Controller
• VOTOL EM80 Controller
• VOTOL EM100 Controller
• VOTOL EM150 Controller
• VOTOL EM180S Controller

3. Sozlash

3.1 Drayv o'rnatish

The cable utilizes a PL2303 chipset. Typically, modern operating systems will automatically install the necessary drivers upon first connection. If automatic installation fails, please download and install the appropriate PL2303 driver from the Prolific Technology website or your controller manufacturer's support page.

3.2 Uskuna ulanishi

1. Connect the USB end of the data cable to an available USB port on your computer.
2. Connect the other end of the data cable to the designated programming port on your VOTOL motor controller. Ensure a secure connection.

3.3 Software Installation and Launch

Obtain the official VOTOL motor controller configuration software from the manufacturer. Install the software on your computer following the provided instructions. Once installed, launch the application.

Figure 1: VOTOL Controller USB Data Cable (Physical Product)
This image shows the physical VOTOL Controller USB Data Cable, featuring a black cable with a blue USB connector on one end and a specialized connector for the VOTOL controller on the other.

4. Foydalanish bo'yicha ko'rsatmalar

After successfully connecting the cable and launching the software, you can begin adjusting controller parameters. The software interface typically features several tabs for different configuration aspects.

4.1 Aloqani o'rnatish

1. In the software interface, locate the 'PORT' dropdown menu. Select the correct COM port assigned to your USB data cable.
2. Click the 'OCH' button to open the selected port.
3. Click the 'Ulanish' button to establish communication with the VOTOL controller. The 'Status' field should indicate a successful connection.

4.2 Parameter Adjustment Overview

The software allows you to read, modify, and write parameters to the controller. Use the 'Param write' button to save changes to the controller. You can also 'import param' or 'save param' to manage configuration files.

4.3 Configuration Tabs

The software typically organizes settings into various tabs. Below are descriptions of common tabs and their functions:

4.3.1 PAGE1: Sport Mode & Speed Settings

This tab allows configuration of performance-related parameters.

• Sport mode setup: Adjust current limiting and flux-weakening values.
• Uch tezlikli: Configure low, mid, and high-speed settings, including flux-weakening for each.
• Downhill electric brake assist (HDC/HHC): Enable or disable these features and set lowermost speed.
• Tezlik chegarasini sozlash: Define speed limits and speed ratios.

Figure 2: Software Interface - PAGE1 (Sport Mode & Speed Settings)
This image displays the 'PAGE1' tab of the VOTOL controller software, showing input fields and checkboxes for configuring sport mode parameters, current limiting, flux-weakening, three-speed settings, downhill electric brake assist (HDC/HHC), and speed limit settings.

4.3.2 PAGE2: Motor Settings

This tab is dedicated to motor-specific configurations.

• Motor Setting: Configure pole pairs, exchange hall wire color, exchange phase wire color, and motor type (surface-mount/V-type).
• Out-put: Select output type (One-Lin, Hall speedometer) and configure moving vehicle booster and cruise control.
• EBS ratio: Adjust the Electronic Braking System ratio.
• Harorat muhofazasi: Set initial temperature, over-temperature, and maximum temperature thresholds.

Figure 3: Software Interface - PAGE2 (Motor Settings)
This image shows the 'PAGE2' tab of the VOTOL controller software, presenting options for motor settings such as pole pairs, wire color exchange, motor type, output configurations, EBS ratio, and various temperature protection parameters.

4.3.3 PAGE3: Basic Settings

This tab contains fundamental controller settings.

• Asosiy sozlamalar: Select controller model, set battery voltage, haddan tashqari kuchlanishtagetage, and soft undervoltage chegaralari.
• Busbar current(A) & Phase current: Input current limits.
• Gaz kelebeği voltage set (max. 5.5V): Configure low protect, start voltage, and end of high voltage.
• Start setting: Adjust start torque, combinative torque, rate of rise, and rate of decline.

Figure 4: Software Interface - PAGE3 (Basic Settings)
This image illustrates the 'PAGE3' tab of the VOTOL controller software, displaying fields for basic settings including controller model selection, battery voltage parameters, current limits, throttle voltage configuration, and motor start settings.

4.3.4 Display: Real-time Monitoring

This tab provides real-time feedback from the controller.

• RPM, Voltage, Cuttent: Displays real-time motor revolutions per minute, voltage, va joriy.
• Controller Status: Shows the current operational status and any fault codes (e.g., IDLE, Hall Fault, Brake, Motor hall, Undervoltage, Overvoltage, Overcurrent, Controller Failure, Out of control, Overheating).
• Controller temp(?), External temp(?): Displays temperature readings.

Figure 5: Software Interface - Display (Real-time Monitoring)
This image presents the 'Display' tab of the VOTOL controller software, showing real-time data such as RPM, Voltage, and Current, along with controller status indicators and fault codes for diagnostic purposes.

4.3.5 Port sozlamalari

This tab allows advanced configuration of communication ports.

• SW, HW, buadrate: Displays software and hardware versions, and allows setting the baud rate.
• CAN enable: Option to enable CAN communication.
• Pin Function Configuration: Detailed settings for various pins (e.g., PD0, PB3, PA0, PB2, JTCK, SWD, PA11, PA12, PC15, PB9, PB4, PA15, PC14, PB5, PD15) to assign specific functions.

Figure 6: Software Interface - Port Settings
This image shows the 'Port Settings' tab of the VOTOL controller software, providing advanced configuration options for communication parameters, including baud rate, CAN enable, and detailed pin function assignments for various controller ports.

5. Xizmat ko'rsatish

To ensure the longevity and reliable operation of your USB data cable:

• Store the cable in a clean, dry environment away from direct sunlight and extreme temperatures.
• Avoid bending or kinking the cable excessively, as this can damage internal wires.
• Do not expose the cable to moisture or corrosive substances.
• Handle connectors carefully to prevent damage to pins or housing.

6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

7. Texnik shartlar

• Model raqami: PL2303-USB
• Chipset: PL2303
• Moslik: VOTOL EM30, EM50, EM80, EM100, EM150, EM180S Controllers
• Interfeys: USB
• Material: Mis, plastmassa
• Rang: Qora va Moviy
• jildtage: 5 volts (USB powered)
• Mahsulot o'lchamlari: 48"L x 0.5"W x 0.5"H (approximately 122 cm x 1.27 cm x 1.27 cm)
• Mahsulot og'irligi: 0.2 kg (approximately 7 oz)

8. Kafolat haqida ma'lumot

For specific warranty details regarding this product, please refer to the information provided by your retailer or the manufacturer at the time of purchase. Warranty terms may vary based on region and seller policies.

9. Qo'llab-quvvatlash

If you encounter issues not covered in this manual or require further assistance, please contact the seller or the manufacturer's customer support. Ensure you have your product model number and purchase details available when seeking support.