GRID BROWS LED Brows Instruction Manual

GRID BROWS LED Brows

BOSHLASHDAN OLDIN

Thank you for your purchase. In this manual we will provide you with the means to get started using your new GRID product!
Similarly used in all forms of real motorsports racing, GRID Brows are a much needed expansion for any dash. With 18 programmable LEDs the possibilities are endless with multiple uses such as spotter info, slip/lock, TC and ABS. (depending on the sim used).

Qoshlar

Xususiyatlari

• CFRP enclosures
• 2x 9 RGB LEDs
• RaceDirector compatible

Carbon fiber mounting brackets 

Mounting the brows

To be able to mount the brows, we have included carbon fiber mounting brackets. Here is how we suggest to use them, though you can orient them the way you like to suit your cockpit or preference.
Be sure to use bolt (A8) to fasten the mounting bracket (A3) to a brow (A1). Bu example we are mounting the brows and control box to the uprights of a cockpit. Of course you are free to mount them how and where you see fit.
Since the brows are daisy-chained together, the first brow unit in the chain is considered the ‘first’ one, defaults to being the left brow. Therefore it makes sense to mount the control box on the left side of the cockpit. Of course, you are free to install these parts how you like to.
All bolts (A7) and slot-nuts (A9) shown are of the same size/type.

Connecting the brows

As mentioned on the previous page, the brows are daisy chained to each other and to the control box. Provided are two brow cables, a short (A6) and long (A5) one, next to the USB cable (A4). To wire the control box to the first brow in the chain, we recommend using the short cable (A6). The long cable (A5) will connect the two brow modules together.
Attention! Be mindful of the way you connect the modules to each other, always go from an ‘OUT’ to an ‘IN’. For the second brow module, ‘OUT’ can be used to connect a third and fourth module. A maximum of four modules in total is supported.
Both brow modules are identical, it doesn’t matter in which order you connect them to each other or to the control box.

Race Direktori

• Download and install the lastest version of RaceDirector from  www.sim-lab.eu/srd-setup
• For explanation on how to install and use RaceDirector, please read the manual. This can be found here: www.sim-lab.eu/srd-manual
• Endi biz sizni tezroq yo'lga qo'yish uchun RaceDirector-dan foydalanishga kirishish uchun asosiy narsalarni ko'rib chiqamiz. Biz sizni RaceDirector taklif qiladigan imkoniyatlarni chuqurroq tushuntirish uchun qo'llanmani ko'rib chiqishingizni so'raymiz.
• Avval biz mahsulotni faollashtirishimiz kerak, bu "Sozlamalar" (1) sahifasida amalga oshiriladi.
• Tick the ‘Activate’ tickbox next to ‘GRID Brows’ (2) and its icon (3) should appear on the left side of the screen. Selecting the icon (3) will take us to its device pages.

Qurilma sahifalari

These pages allow you to control, configure and update your device. To keep this manual concise, we only go over the basics or unique functions.

LEDS (A)
All of these options are identical to the LEDs device page for other devices, although there is one additional option which is unique for the Brows and DDU5 V2. The Brows V2 can be daisy chained together, allowing up to 4 brow modules to be connected (1) in total. Please be aware your profiles need to be custom made to suit your needs here. Our default profile is made for the base pair as packaged.
For more information on connectivity, please refer to Page 6 of this manual.

FIRMWARE (B)
On this page you can see the current firmware loaded on the device. If your firmware is out of date, we recommend to update it.RaceDirector joriy dasturiy ta'minot versiyalarini kuzatib boradi. Farqni aniqlasa, bildirishnoma Sizga yangi proshivka aniqlanganligi haqida xabar beradi. When an updated firmware version has been detected, please follow the instructions and click the ‘Perform update’ (1) button.
RaceDirector will show the progress and will take care of the updating for you. If you see a windows explorer or USB device poppping up, don’t worry, it is part of the process.

Older devices might still require the former firmware update tool. In that case, RaceDirector will tell you what to do.

Simhub qo'llab-quvvatlash

For advanced users, we do still support people who prefer using Simhub. When adding a device, choose the ‘GRID Brows V2’ device.. LEDlarning funktsiyalarini o'zgartirish.
To change the LED effects you need to know their numbering to identify them on the modules. The following schematic shows the LED numbering for treference. Taqdim etilgan standart LED proda etarli ma'lumot bo'lishi kerakfiles LED sozlamalarini sizning xohishingizga moslashtira olish. O'zingizning professionalingizni yaratishni boshlash uchunfile, biz mavjudni nusxalashni va kerak bo'lganda o'zgartirishni taklif qilamiz. Advantage - sizda har doim standart proning zaxira nusxasi mavjudfile ga qaytish.
Eslatma: Simhub pro bilan bog'liq muammolar/nosozliklarni bartaraf etish uchunfiles, iltimos, Simhub hujjatlariga yoki Simhub yordamiga qarang.

Materiallar ro'yxati

Batafsil ma'lumot

Agar sizda ushbu mahsulotni yig'ish yoki qo'llanmaning o'zi haqida hali ham savollaringiz bo'lsa, bizning qo'llab-quvvatlash bo'limiga murojaat qiling. Ularga quyidagi manzil orqali murojaat qilish mumkin:  support@sim-lab.eu
Alternatively, we have a Discord server where you can hang out or ask for help. www.sim-lab.eu/discord