1. Kirish
This manual provides essential information for the installation, operation, and maintenance of your new Original 36V 400W Motor for the Segway F2 Plus Electric Scooter. This rear wheel hub motor, complete with a 60/70-6.5 vacuum tire, is designed to restore or enhance the performance of your scooter. Please read this manual thoroughly before proceeding with any installation or use to ensure safe and correct handling.
2. Xavfsizlik ma'lumotlari
- Always disconnect the scooter's power source (battery) before performing any installation or maintenance.
- Wear appropriate personal protective equipment, including gloves and eye protection, during installation.
- Qisqa tutashuvlarning oldini olish uchun barcha elektr ulanishlarining xavfsiz va to'g'ri izolyatsiyalanganligiga ishonch hosil qiling.
- Agar biron bir qadamga ishonchingiz komil bo'lmasa, malakali texnik bilan maslahatlashing.
- Bolalar va uy hayvonlarini ish joyidan uzoqroq tuting.
3. Texnik shartlar
| Xususiyat | Tafsilot |
|---|---|
| jildtage | 36V |
| Nominal quvvat | 400 Vt |
| Moslik | Segway F2 Plus Electric Scooter |
| Shinalar turi | Vacuum Tire (Tubeless) |
| Shina hajmi | 60/70-6.5 |
| Material | High-quality metal alloy (wheel hub), durable rubber (tire) |
| Umumiy diametri | Taxminan 250 mm |
| Umumiy kenglik | Taxminan 150 mm |
| Kelib chiqishi | Materik Xitoy |
Batafsil View of Motor Specifications:
Image: Close-up showing '36V 400W' and other identifiers on the motor hub.
Tire Size Detail:
Image: Detail of the tire sidewall indicating size '60/70-6.5' and 'TUBELESS'.
Dimensional Overview:
Image: Diagram illustrating the approximate 250mm diameter and 150mm width of the motor and tire assembly.
4. Paket tarkibi
Paketingizda quyidagi element bo'lishi kerak:
- 1 x F2 Plus 36V 400W Motor (with integrated 60/70-6.5 vacuum tire)
Barcha qismlar mavjudligiga va shikastlanmaganligiga ishonch hosil qilish uchun, iltimos, qabul qilgandan so'ng tarkibini tekshiring.
5. O'rnatish va o'rnatish
This motor is a direct replacement for the rear wheel hub motor on the Segway F2 Plus Electric Scooter. Installation typically involves removing the existing rear wheel and motor assembly and installing the new unit. Professional installation is recommended if you are not familiar with electric scooter repair.
tugadiview of the Motor Assembly:
Rasm: old view of the complete motor and tire assembly.
Placement on Scooter:
Image: Illustrates the motor's position as the rear wheel of the Segway F2 Plus scooter.
Simli ulanishlar:
Image: Detail of the electrical wiring harness and connectors for the motor.
O'rnatish bosqichlari (umumiy qo'llanma):
- Skuterni tayyorlang: Turn off the scooter and disconnect the battery to prevent accidental power-on. Place the scooter on a stable stand or surface to access the rear wheel.
- Eski g'ildirakni olib tashlang: Carefully disconnect the existing motor's electrical wires. Note their positions and colors for re-connection. Unscrew and remove the axle nuts and any other fasteners holding the rear wheel assembly in place. Remove the old wheel.
- Yangi motorni o'rnatish: Position the new 36V 400W motor assembly into the scooter's rear fork. Ensure it is correctly aligned.
- Secure the Axle: Re-attach the axle nuts and tighten them securely. Do not overtighten.
- Simlarni ulash: Carefully connect the new motor's electrical wires to the scooter's wiring harness. Match the wire colors and connector types (as shown in the wiring connections image). Ensure all connections are firm and properly insulated.
- Yakuniy tekshiruvlar: Double-check all connections and ensure no wires are pinched or exposed. Reconnect the scooter battery.
6. Foydalanish bo'yicha ko'rsatmalar
After successful installation, perform a functional test:
- Yoqilgan: Turn on your Segway F2 Plus scooter.
- Dastlabki sinov: With the rear wheel off the ground, gently engage the throttle to ensure the motor spins smoothly and quietly.
- Tormoz sinovi: Test the rear brake to ensure it engages properly and stops the wheel.
- Yo'l sinovi: Once satisfied with the initial tests, perform a short test ride in a safe, open area at low speed. Gradually increase speed and test braking and acceleration.
The motor is designed to provide robust performance. Operate your scooter according to the original manufacturer's guidelines.
7. Xizmat ko'rsatish
- Doimiy tekshirish: Periodically check the motor and tire for any signs of wear, damage, or loose connections.
- Shina bosimi: Maintain the recommended tire pressure for the 60/70-6.5 vacuum tire as specified by Segway for optimal performance and longevity.
- Tozalash: Keep the motor and wheel clean from dirt, dust, and debris. Use a damp cloth for cleaning; avoid high-pressure water jets directly on the motor.
- Elektr simlari: Ensure all wiring remains intact and free from cuts or abrasions.
8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Motor not spinning | Loose wiring connection, battery low, controller issue | Check all wiring connections. Ensure battery is charged. Consult scooter's main manual for controller diagnostics. |
| Dvigateldan noodatiy shovqin | Foreign object, loose components, internal motor issue | Inspect for debris. Check for loose nuts/bolts. If noise persists, professional inspection is recommended. |
| Kamaytirilgan quvvat/tezlik | Low battery, tire pressure, motor overload | Charge battery fully. Check and adjust tire pressure. Avoid overloading the scooter. |
| Tire losing air | Puncture, valve stem issue | Inspect tire for punctures. Check valve stem for leaks. Repair or replace tire if necessary. |
9. Foydalanuvchi maslahatlari
- For optimal performance and safety, always ensure your scooter's battery is fully charged before long rides.
- Regularly check tire pressure, especially before each ride, to ensure a smooth and efficient journey.
- Store your scooter in a dry, cool place to prolong the life of the motor and battery.
10. Kafolat va qo'llab-quvvatlash
For any warranty claims or technical support, please contact the seller or the manufacturer directly. Keep your purchase receipt as proof of purchase. Ensure you follow all installation and maintenance guidelines to avoid voiding any potential warranty.
