1. Mahsulot tugadiview
The Lutron Diva DVSCELV-300P-BI is a 300-watt single pole electronic low-voltage dimmer designed to control lighting from one location. It features a large paddle switch for on/off control and a linear slider for precise dimming adjustments. This dimmer is specifically for use with electronic low-voltage lighting applications. It allows users to adjust light levels, contributing to energy savings and creating desired room atmospheres. Wallplates are sold separately.
2. Xavfsizlik ma'lumotlari
- Ogohlantirish: shok xavfi. May result in serious injury or death. Turn OFF power at the circuit breaker or fuse box before installing.
- Barcha milliy va mahalliy elektr qoidalariga muvofiq o'rnatish.
- Agar ushbu ko'rsatmalarning biron bir qismida ishonchingiz komil bo'lmasa, malakali elektrchiga murojaat qiling.
- Do not use with standard incandescent, magnetic low-voltage, or fluorescent lighting. This dimmer is for electronic low-voltagfaqat e ilovalar.
- Umumiy vatni ta'minlangtage of the connected lighting does not exceed 300 watts.
3. Paket tarkibi
- Lutron Diva DVSCELV-300P-BI Dimmer
- Wire connectors (various colors, typically yellow and blue)
- O'rnatish uchun qo'llanma
Note: Wallplate is not included and must be purchased separately.
4. Texnik shartlar
| Xususiyat | Tafsilot |
|---|---|
| Model raqami | DVSCELV-300P-BI |
| Wattage | 300 vatt |
| Operatsion jildtage | 120 volt |
| O'chirish turi | Single Pole (1-way) |
| Ilova | Elektron past hajmlitage (ELV) |
| Olchamlari (U x G x Y) | 1.75 x 2.2 x 4.25 dyuym |
| Rang | Pechene |
| Nazorat usuli | Paddle Switch with Linear Slider |
| Material | Mis (aloqa materiali) |
5. O'rnatish
Before beginning installation, ensure you have turned off power at the circuit breaker. This dimmer is designed for single-pole applications where the light is controlled from one switch. A neutral wire connection is typically required for proper operation.
5.1. Tayyorgarlik
- Quvvatni o'chiring: Locate your circuit breaker panel and turn off the power to the light switch you are replacing.
- Quvvat o'chirilganligini tekshiring: Flip the existing switch on and off to confirm the power is disconnected.
- Remove existing wallplate and switch: Unscrew the wallplate and then the mounting screws holding the old switch in place. Carefully pull the switch out from the wall box.
- Simlarni aniqlang: Note the connections of the existing wires. Typically, a single-pole switch will have two load/line wires and a ground wire. Some dimmers may require a neutral wire (usually white).
Rasm: old view of the Lutron Diva DVSCELV-300P-BI Electronic Low-Voltage Dimmer, showing the paddle switch and linear slider.
Rasm: yon view of the Lutron Diva DVSCELV-300P-BI Dimmer, illustrating the pre-stripped wires for connection.
5.2. Wiring the Dimmer
The Lutron Diva DVSCELV-300P-BI dimmer typically has three wires: a green wire (ground), a black wire (hot/line), and a yellow wire (load). Some models may also include a white wire (neutral).
- Tuproq simi: Connect the green wire from the dimmer to the bare copper or green ground wire in the wall box using a wire connector.
- Hot/Line Wire: Connect the black wire from the dimmer to the incoming hot/line wire from the circuit breaker (often black or red) using a wire connector.
- Yuklash simi: Connect the yellow wire from the dimmer to the load wire that goes to the light fixture (often black or red) using a wire connector.
- Neutral Wire (if applicable): If your dimmer has a white wire and your wall box has a neutral wire bundle (usually white wires twisted together), connect the white dimmer wire to the neutral bundle using a wire connector. If no neutral wire is present in the wall box, cap off the white wire from the dimmer with a wire connector.
Video: This video demonstrates the wiring process for a single-pole dimmer with one black, one yellow, and one white wire, which is applicable to the Lutron Diva DVSCELV-300P-BI. It covers connecting the ground, hot, load, and neutral wires.
5.3. Finishing Installation
- Secure the dimmer: Carefully push all wires back into the wall box. Mount the dimmer to the wall box using the provided screws.
- Attach wallplate: Install the coordinating wallplate (sold separately) over the dimmer.
- Quvvatni tiklash: Return to your circuit breaker panel and turn the power back on.
Image: The Lutron Diva DVSCELV-300P-BI Dimmer installed in a wall, ready for use.
6. Operatsiya
- Chiroqlarni yoqish/o'chirish: Press the large paddle switch to turn the connected lights on or off.
- Yorqinlikni sozlash: Use the linear slider located next to the paddle switch to adjust the light level. Slide up for brighter lights and down for dimmer lights.
- Preset Dimming: The dimmer will return to the previously set light level when turned back on.
Image: A hand demonstrating the operation of the Lutron Diva DVSCELV-300P-BI Dimmer, highlighting the paddle switch and linear slider.
7. Xizmat ko'rsatish
- Tozalash: Clean the dimmer and wallplate with a soft, damp mato. Abraziv tozalash vositalarini yoki erituvchilarni ishlatmang.
- Foydalanuvchi tomonidan xizmat ko'rsatadigan qismlar yo'q: There are no user-serviceable parts inside the dimmer. Do not attempt to open or repair the unit.
8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
| Muammo | Mumkin sabab / yechim |
|---|---|
| Chiroqlar yoqilmaydi. |
|
| Lights flicker or buzz. |
|
| Dimmer does not dim properly. |
|
9. Kafolat va qo'llab-quvvatlash
For warranty information, technical support, or further assistance, please visit the official Lutron website or contact Lutron customer service. Keep your purchase receipt for warranty claims.
Lutron Support: Lutron.com/support
