Robinair 16009 134R DiscovR sovutgich identifikatori foydalanuvchi qo'llanmasi

1. Kirish

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the Robinair 16009 134R DiscovR Refrigerant Identifier. This device is designed to protect A/C service equipment by verifying the purity of R134a refrigerant before vehicle servicing.

2. Xavfsizlik ma'lumotlari

Always adhere to the following safety guidelines when operating the Robinair 16009 DiscovR Refrigerant Identifier:

• Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling refrigerants.
• Ensure adequate ventilation in the work area to prevent the accumulation of refrigerant vapors.
• Qurilmani haddan tashqari harorat, namlik yoki to'g'ridan-to'g'ri quyosh nuri ta'siriga qo'ymang.
• Only use the identifier with R134a refrigerant as specified.
• Disconnect the device from the power source before performing any maintenance or cleaning.
• Refer to local regulations for proper handling and disposal of refrigerants.

3. Mahsulot xususiyatlari

The Robinair 16009 DiscovR Refrigerant Identifier offers several key features:

• Refrigerant Purity Verification: Identifies whether R134a refrigerant is pure enough for recovery.
• A/C Equipment Protection: Guards against damage to R134a recovery, recycle, and recharge machines from contaminated refrigerant.
• Air Contamination Detection: Notifies the user if the system contains excessive air.
• Aniq ko'rsatkichlar: Features "PASS" and "FAIL" lights for immediate results.
• Yilni dizayn: Portable and easy to use in various automotive service environments.

4. Qurilma tugadiview

Familiarize yourself with the components and indicators of the Robinair 16009 DiscovR Refrigerant Identifier.

1-rasm: Robinair 16009 DiscovR Refrigerant Identifier. The device features a display with "PASS" and "FAIL" indicators, along with status lights for "WARM UP", "CALIBRATING", "ANALYZING", "FAULT", and "EXCESS AIR". A "NEXT" button is also visible. The unit is connected to a hand-operated bulb pump via clear tubing.

4.1 Displey ko'rsatkichlari

• O'TISH: Illuminates when the refrigerant is determined to be pure R134a.
• MUVOFIQ: Illuminates when the refrigerant is contaminated or contains excessive air.
• QIZDIRISH; ISITISH: Indicates the device is heating to its operating temperature.
• CALIBRATING: Indicates the device is performing an internal calibration.
• ANALYZING: Indicates the device is actively testing the refrigerant sample.
• XATO: Indicates an error or malfunction within the device.
• ORTA HAVO: Illuminates when the refrigerant sample contains a high level of air.
• KEYINGI tugmasi: Used to advance through operational steps.

5. Sozlash

1. Qurilmani o'ramidan chiqarib oling: Carefully remove the Robinair 16009 DiscovR Refrigerant Identifier and all accessories from its packaging.
2. Zararni tekshirish: Check the device and its components for any visible damage. Do not use if damaged.
3. Quvvatni ulash: Connect the device to a 12-volt DC power source.
4. Ulanish Sample Hose: s ni biriktiringample hose with the hand-operated bulb pump to the designated inlet port on the identifier. Ensure a secure connection.

6. Foydalanish bo'yicha ko'rsatmalar

Follow these steps to accurately identify R134a refrigerant:

1. Yoqilgan: Turn on the device. The "WARM UP" indicator will illuminate. Allow the unit to reach its operating temperature. This may take several minutes.
2. Kalibrlash: Once warm-up is complete, the "CALIBRATING" indicator will illuminate. The device will perform an automatic calibration. Wait for this process to finish.
3. Tizimga ulanish: s ni ulangample hose to the R134a A/C system or refrigerant container you wish to test. Ensure the connection is leak-free.
4. Draw Sampga: Use the hand-operated bulb pump to draw a sample of refrigerant into the identifier. Pump the bulb several times to ensure a representative sample.
5. Initiate Analysis: Press the "NEXT" button to begin the analysis. The "ANALYZING" indicator will illuminate.
6. Review Natijalar:
   • If the "PASS" light illuminates, the refrigerant is pure R134a and suitable for recovery.
   • If the "FAIL" light illuminates, the refrigerant is contaminated. The "EXCESS AIR" light may also illuminate if air contamination is detected. Do not recover contaminated refrigerant into your RRR machine.
7. Ulanish: Safely disconnect the sample hose from the system or container.
8. O'chirish: Foydalanishdan keyin qurilmani o'chiring.

7. Xizmat ko'rsatish

Regular maintenance ensures the longevity and accuracy of your identifier.

• Tozalash: Qurilmaning tashqi qismini yumshoq mato bilan artib oling, damp mato. Abraziv tozalash vositalarini yoki erituvchilarni ishlatmang.
• Saqlash: Store the identifier in a clean, dry environment away from extreme temperatures and direct sunlight.
• Shlangi tekshirish: Periodically inspect the sample hose and connections for wear, cracks, or leaks. Replace if necessary.
• Kalibrlash: The device performs automatic calibration. If consistent inaccurate readings are suspected, contact customer support.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Umumiy muammolar va ularning yechimlari uchun quyidagi jadvalga qarang:

9. Texnik shartlar

10. Kafolat va qo'llab-quvvatlash

For warranty information, technical assistance, or to order replacement parts, please contact Robinair customer support. Keep your purchase receipt as proof of purchase.

Refer to the official Robinair website or your product documentation for the most current contact information and warranty details.