1. Mahsulot tugadiview
The Yuasa YTX H Series AGM Battery (Model YUAM72H4A) is a high-performance, factory-activated battery designed for various applications requiring reliable power. This battery features advanced lead-calcium technology, which allows it to maintain its specific gravity significantly longer than conventional lead-antimony batteries. Its Absorbed Glass Mat (AGM) separators absorb the electrolyte, making the battery non-spillable. The valve-regulated design eliminates water loss, removing the need for refilling. This battery is factory-activated, meaning it is pre-filled with electrolyte, sealed, and charged at the factory, ready for immediate use.
Asosiy xususiyatlarga quyidagilar kiradi:
- Up to 30% more cold cranking amps for increased power.
- Advanced lead-calcium technology for extended charge retention.
- Absorbed Glass Mat (AGM) separators for a non-spillable design.
- Valve-regulated design eliminates water loss and maintenance.
- Factory Activated (FA) for immediate use upon purchase.

Figure 1: Yuasa YUAM72H4A YTX14AH Factory Activated H Series AGM Battery. This image displays the top and front of the battery, showing the positive and negative terminals, the Yuasa branding, and key specifications printed on the label. Included are the terminal screws and nuts for installation.
2. Xavfsizlik ma'lumotlari
Always prioritize safety when handling batteries. Failure to follow these instructions can result in serious injury or property damage.
- XAVF/ZAHAR: This battery contains sulfuric acid, which can cause blindness or severe burns upon contact.
- KO'ZNI HIMOYA: Always wear appropriate eye protection (safety goggles) when working with batteries.
- EXPLOSIVE GASES: Batteries produce explosive gases. Keep sparks, flames, and smoking materials away from the battery. Ensure adequate ventilation.
- BOLALARNING YANGI BO'LMASIN: Store batteries in a secure location inaccessible to children.
- BIRINCHI YORDAM: In case of contact with acid, flush eyes immediately with water for at least 15 minutes and seek medical help fast. For skin contact, wash thoroughly with soap and water.
- O‘RNATISH: Read the complete instruction manual carefully before installation or use.
- TASHLASH: Do not dispose of batteries in household waste. Recycle properly at an authorized facility.
3. O'rnatish va o'rnatish
The Yuasa YUAM72H4A battery is Factory Activated (FA), meaning it comes pre-filled, sealed, and charged, ready for installation. No initial electrolyte filling or charging is required.
3.1 O'rnatishga tayyorgarlik
- Ensure the vehicle's ignition is off and the key is removed.
- Locate the existing battery in your vehicle.
- Tegishli himoya vositalarini, jumladan ko'zni himoya qilish va qo'lqoplarni taqing.
3.2 Removing the Old Battery
- Disconnect the negative (-) terminal first, followed by the positive (+) terminal.
- Carefully remove any battery hold-down straps or clamps.
- Lift the old battery out of its compartment. Be mindful of its weight.
- Inspect the battery tray and cables for corrosion or damage. Clean as necessary.
Video 1: Battery Removal and Installation. This video demonstrates the process of removing an old battery and installing a new one in a motorcycle, including disconnecting and reconnecting terminals.
3.3 Installing the New Battery
- Place the new Yuasa YUAM72H4A battery into the battery compartment. Ensure it sits securely.
- Secure the battery with any hold-down straps or clamps.
- Connect the positive (+) terminal first, then the negative (-) terminal. Ensure connections are tight.
- Apply a thin coat of dielectric grease to the terminals to prevent corrosion.
Video 2: Motorcycle Battery Wiring Guide. This video provides a detailed guide on correctly wiring a motorcycle battery, emphasizing the proper sequence for connecting positive and negative terminals.
4. Foydalanish bo'yicha ko'rsatmalar
Once installed, the Yuasa YUAM72H4A battery is ready to power your vehicle. Ensure all electrical connections are secure before starting the engine.
- The battery provides 12 volts of power for starting and operating vehicle electronics.
- Avoid excessive discharge, as this can shorten battery life.
- If the vehicle is not used for extended periods, consider using a trickle charger to maintain the battery's charge.
5. Xizmat ko'rsatish
While the Yuasa YTX H Series AGM battery is maintenance-free in terms of electrolyte refilling, regular checks can extend its lifespan and ensure optimal performance.
- Terminal tekshiruvi: Periodically check battery terminals for cleanliness and tightness. Clean any corrosion with a wire brush and baking soda solution, then rinse with water and dry thoroughly.
- Batareya holati: Keep the battery case clean and dry. Inspect for any signs of damage or cracks.
- Zaryadlash: If the vehicle is stored or used infrequently, connect the battery to a suitable battery maintainer or trickle charger to prevent self-discharge. This helps prolong battery life.
- Saqlash: When storing the battery for long periods, ensure it is fully charged and stored in a cool, dry place. Recharge every 3-6 months if not connected to a maintainer.
6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
If you encounter issues with your Yuasa YUAM72H4A battery, consider the following common troubleshooting steps:
- Engine Cranks Slowly or Not at All: This often indicates a low battery charge. Check the battery voltage with a multimeter. If below 12.4V, recharge the battery. Also, inspect terminals for corrosion and ensure they are tightly connected.
- Chiroqlar xira yoki miltillaydi: Similar to slow cranking, this suggests a low battery charge or poor connections. Verify voltage and terminal integrity.
- Batareya zaryadni ushlab turmaydi: After charging, if the battery quickly loses its charge, it might be due to a parasitic drain in the vehicle's electrical system or the battery has reached the end of its service life. Consult a professional for parasitic drain diagnosis.
- Swollen Battery Case: A swollen battery case indicates overcharging or internal damage. Discontinue use immediately and replace the battery.
For persistent issues, consult a qualified technician or contact Yuasa customer support.
7. Texnik shartlar
| Xususiyat | Spetsifikatsiya |
|---|---|
| Model raqami | YUAM72H4A (YTX14AH) |
| Batareya turi | Factory Activated H Series AGM Battery |
| jildtage | 12V |
| Capacity (10HR) | 12 Ah |
| Capacity (20HR) | 12.6 Ah |
| Sovuq kranking Amps (CCA @ 0°F) | 210A |
| Regular Charge Current | 1.2 Amp |
| Uzunlik | 5 5/16 dyuym (134 mm) |
| Kengligi | 3 1/2 dyuym (89 mm) |
| Balandligi | 6 9/16 in (166 mm) (Includes 10mm height spacer) |
| Weight with Acid | 11.1 funt |
| Terminal turi | F2 terminali |
| Texnologiya | Advanced Lead-Calcium, Absorbed Glass Mat (AGM) |
8. Kafolat haqida ma'lumot
For specific warranty details regarding your Yuasa YUAM72H4A battery, please refer to the warranty card included with your product or visit the official Yuasa website. Warranty coverage typically includes defects in materials and workmanship under normal use and service conditions.
9. Qo'llab-quvvatlash
If you require further assistance, have questions about your battery, or need technical support, please contact Yuasa customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your battery model number (YUAM72H4A) and purchase details readily available.





