The GREISINGER logo, representing the manufacturer of this oxygen tester.
GREISINGER GOX 100 havo sinov qurilmasi foydalanuvchi qo'llanmasi
Model: GOX 100 (Part Number: 600437)
1. Kirish
The GREISINGER GOX 100 is a compact and precise measuring instrument designed for atmospheric oxygen measurements. It is suitable for a wide range of applications, including scuba diving, workplace safety, and air conditioning and ventilation technology. This manual provides essential information for the proper setup, operation, and maintenance of your GOX 100 device.
2. Xavfsizlik ma'lumotlari
- Qurilmani ishlatishdan oldin ushbu qo'llanmani diqqat bilan o'qing.
- Qurilmani haddan tashqari harorat, to'g'ridan-to'g'ri quyosh nuri yoki haddan tashqari namlik ta'sirida qoldirmang.
- Ensure the sensor is properly connected before taking measurements.
- Only use the device for its intended purpose of measuring atmospheric oxygen.
- Qurilmani va uning tarkibiy qismlarini bolalar qo'li yetmaydigan joyda saqlang.
- Batareyalar va qurilmani mahalliy qoidalarga muvofiq utilizatsiya qiling.
3. Paket tarkibi
Paketda barcha elementlar mavjudligiga ishonch hosil qiling:
- GREISINGER GOX 100 Oxygen Meter
- Oxygen Sensor (connected via cable)
- Foydalanuvchi uchun qo'llanma
- 9V Block Battery (may not be included, check packaging)
4. Sozlash
4.1 Batareyani o'rnatish
- Qurilmaning orqa tomonidagi batareya bo'linmasini toping.
- Batareya bo'limi qopqog'ini oching.
- Insert a 9V block battery, ensuring correct polarity.
- Batareya bo'limi qopqog'ini mahkam yoping.
4.2 Sensor ulanishi
The oxygen sensor is typically pre-connected to the GOX 100 via a cable. Ensure the connection is firm and secure.
The GREISINGER GOX 100 device with its attached oxygen sensor, displaying an oxygen reading of 20.9%.
5. Foydalanish bo'yicha ko'rsatmalar
5.1 Quvvatni yoqish/o‘chirish
- Qurilmani yoqish uchun tugmasini bosing yoqish/o‘chirish tugmasi. Displey yonadi.
- Qurilmani oʻchirish uchun tugmasini bosing va ushlab turing yoqish/o‘chirish displey o'chguncha tugmasini bosing.
5.2 O'lchovni o'tkazish
- Once powered on, the device will automatically begin displaying the current oxygen concentration in percentage (%).
- Position the sensor in the environment where you wish to measure oxygen. Allow a few moments for the reading to stabilize.
5.3 MIN/MAX Value Recall
- ni bosing rejimi button to cycle through different display modes, including minimum (MIN) and maximum (MAX) oxygen values recorded since the device was last powered on or reset.
- To reset MIN/MAX values, refer to the specific instructions in the full manual (if applicable).
5.4 Automatic Off Function
The GOX 100 features an adjustable automatic off function to conserve battery life. If enabled, the device will power off after a period of inactivity. Refer to the full manual for instructions on how to adjust or disable this feature.
6. Kalibrlash
Regular calibration ensures the accuracy of your GOX 100. The device supports easy calibration in ambient air.
- Ensure the device and sensor are at a stable temperature.
- Place the sensor in fresh ambient air, away from any sources of gas or fumes.
- ni bosing va ushlab turing kal button until the display indicates calibration mode.
- The device will automatically adjust its reading to 20.9% or 21.0% oxygen, which is the approximate concentration of oxygen in normal ambient air.
- Once calibration is complete, the device will return to normal measurement mode.
The GREISINGER GOX 100 displaying 21.0% O2, indicating a successful calibration in ambient air.
7. Xizmat ko'rsatish
7.1 Sensorni almashtirish
The GOX 100 features a convenient, easily replaceable sensor element. Over time, the sensor's performance may degrade. When replacement is necessary:
- Qurilmani o'chiring.
- Carefully disconnect the old sensor from the cable.
- Connect the new, compatible GREISINGER oxygen sensor.
- Perform a calibration as described in Section 6.
7.2 Tozalash
- Qurilmani tozalang casing yumshoq bilan, damp mato. Abraziv tozalash vositalarini yoki erituvchilarni ishlatmang.
- Ensure no liquid enters the device or sensor connections.
- Keep the sensor clean and free from dust or debris.
8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
| Muammo | Mumkin sabab / yechim |
|---|---|
| Qurilma yoqilmaydi | Batareyaning o'rnatilishini va zaryadlanishini tekshiring. Agar kerak bo'lsa, batareyani almashtiring. |
| Noto'g'ri o'qishlar | Perform calibration (Section 6). Check sensor for damage or contamination. Sensor may need replacement. |
| Display shows 'Err' or similar | Indicates a sensor error or malfunction. Try recalibrating. If issue persists, sensor may need replacement or contact support. |
| Automatic off too soon/not at all | Adjust the automatic off settings (refer to full manual). |
9. Texnik spetsifikatsiyalar
| Parametr | Qiymat |
|---|---|
| O'lchov diapazoni | 0 - 100 % Oxygen |
| Rezolyutsiya | 0.1% |
| O'lchov aniqligi | 0 % (Note: This likely refers to a specific condition or a typo in source data, typical accuracy is usually +/- a percentage point) |
| Quvvatlantirish manbai | 9V blokli batareya |
| Himoya turi | IP65 |
| Olchamlari (H x V) | 106 mm x 67 mm |
| Og'irligi | 150 g (device only, approx.) |
| Cable Length (sensor) | 0.7 m |
| Thermal Compensation | Avtomatik |
10. Kafolat va qo'llab-quvvatlash
GREISINGER products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GREISINGER websayt.
For technical support, troubleshooting assistance, or to inquire about replacement parts and sensors, please contact GREISINGER customer service through their official websayt yoki mahsulot hujjatlarida ko'rsatilgan aloqa ma'lumotlari.
