1. Kirish
Sotib olganingiz uchun tashakkurasing the Matrix DX1800.5 1800 Watt 5-Channel MOSFET Car Power Amplifier. This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your new ampko'targich. O'rnatish yoki ishlatishdan oldin ushbu qo'llanmani diqqat bilan o'qib chiqing amplifier to ensure optimal performance and safety.
2. Xavfsizlik ma'lumotlari
- Har qanday o'rnatishni boshlashdan oldin har doim avtomobil akkumulyatorining salbiy terminalini ajratib oling.
- Barcha simlarning to'g'ri joylashtirilganligiga va chimchilab yoki shikastlanmasligi uchun mahkamlanganligiga ishonch hosil qiling.
- Use appropriate gauge power and ground wires as specified in the installation section.
- ni o'rnatmang ampKo'targichni to'g'ridan-to'g'ri quyosh nuri, haddan tashqari issiqlik, namlik yoki chang tushadigan joylarda ishlating.
- O'rnatish jarayonining biron bir qismi haqida ishonchingiz komil bo'lmasa, professional avtomobil audio o'rnatuvchisiga murojaat qiling.
- Bu amplifier is designed for 12V DC negative ground systems only.
3. Mahsulot tugadiview
The Matrix DX1800.5 is a high-performance 5-channel car power amplifier designed to deliver clear and powerful audio. It features a robust MOSFET power supply and versatile crossover controls for precise sound tuning.
Asosiy xususiyatlar:
- 5-Channel 1800 Watt MOSFET Power Amphayotiyroq
- Maximum Power Rating (4 Ohm): 125 Watts x 4 Channels + 480 Watts x 1 Channel
- Maximum Power Rating (2 Ohm): 250 Watts x 4 Channels + 800 Watts x 1 Channel
- PWM DC to DC Power Supply for stable performance
- 2 Ohm barqaror Stereo ishlashi
- Built-in Variable High Pass Filter (40 Hz - 3 kHz)
- Built-in Variable Low Pass Filter (40 Hz - 250 Hz)
- Built-in Bass Boost Control (0/+6/+12 dB)
- RCA Speaker / Line Output
- Comprehensive Protection Circuits (Short Circuit, Thermal, Speaker)
- Quvvat va himoya LED ko'rsatkichlari
- Channel Separation: Greater than 60 dB
- Includes Bass Boost Remote Control
Mahsulot Views:
4. O'rnatish va o'rnatish
To'g'ri o'rnatish sizning ishlashingiz va uzoq umr ko'rish uchun juda muhimdir ampUshbu amallarni diqqat bilan bajaring.
4.1 O'rnatish joyi
O'rnatish uchun quruq, yaxshi shamollatiladigan va to'g'ridan-to'g'ri issiqlik manbalaridan uzoqda joylashgan joyni tanlang. Atrofda yetarli havo oqimi borligiga ishonch hosil qiling. amplifier. Common locations include the trunk, under seats, or behind rear seats.
4.2 Simli ulanishlar
- Power (BATT+): Connect a direct wire from the positive terminal of the vehicle's battery to the BATT+ terminal on the amplifier. Use an appropriate gauge wire (e.g., 4 AWG for this amplifier) and install an in-line fuse holder within 18 inches of the battery.
- Yer (GND): Connect a wire of the same gauge as the power wire from the GND terminal on the ampko'targichni avtomobil shassisidagi toza, bo'yalmagan metall yuzaga qo'ying. Yaxshi elektr aloqasini ta'minlang.
- Masofaviy (REM): Connect a thin wire from the remote output of your head unit (usually a blue/white wire) to the REM terminal on the ampko'targich. Bu sim aylantiradi ampbosh blokingiz bilan ko'targichni yoqing va o'chiring.
- RCA yozuvlari: Connect RCA cables from your head unit's pre-amp mos keladigan RCA kirish raz'emlariga chiqadi amplifier. Ensure correct channel matching (Front, Rear, Subwoofer).
- Dinamik chiqishlari: Karnaylaringizni ulang amplifier's speaker terminals. Pay close attention to polarity (+ and -) for each speaker. Ensure the total impedance of your speakers matches the amplifier's stable impedance (2 Ohm stereo stable).
5. Foydalanish bo'yicha ko'rsatmalar
Once installed, you can adjust the amplifier settings to optimize your audio system's performance.
5.1 Nazoratni qo'lga kiritish
The gain control (LEVEL) matches the amplifier's input sensitivity to the output of your head unit. Start with the gain set to minimum. Play a familiar track at about 75% of your head unit's maximum volume. Slowly increase the amplifier's gain until you hear distortion, then back off slightly. Do not use the gain control as a volume knob.
5.2 Krossover sozlamalari
- Yuqori o'tish filtri (HPF): Used for full-range speakers (front/rear channels). This filter allows frequencies above the set point to pass through. Adjust to prevent low frequencies from distorting smaller speakers. Typical settings range from 80Hz to 120Hz.
- Past o'tish filtri (LPF): Used for subwoofers (subwoofer channel). This filter allows frequencies below the set point to pass through. Adjust to match the subwoofer's frequency response and blend with your main speakers. Typical settings range from 80Hz to 100Hz.
5.3 Bass Boost
The bass boost control allows you to enhance low frequencies. Use this feature sparingly, as excessive bass boost can lead to distortion and potential speaker damage. Adjust in small increments (0/+6/+12 dB) using the included remote control.
6. Xizmat ko'rsatish
- ni saqlang ampko'targich toza va changsiz. Tozalash uchun yumshoq, quruq matodan foydalaning.
- Atrofda to'g'ri shamollatishni ta'minlang amphaddan tashqari issiqlikning oldini olish uchun ko'taruvchi.
- Vaqti-vaqti bilan barcha simli ulanishlarni mahkamlik va korroziya uchun tekshiring.
7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| No Power / Protection LED On | Blown fuse, poor power/ground connection, amphimoya rejimida ko'targich. | Ichki sug'urta tekshiring va amplifier fuses. Verify power, ground, and remote wire connections. Check speaker wiring for shorts. |
| Ovoz yo'q | RCA cables disconnected, gain too low, head unit settings, speaker wires disconnected. | Check RCA connections. Adjust gain. Verify head unit output. Check speaker wire connections. |
| Buzilgan ovoz | Gain set too high, improper crossover settings, speaker impedance mismatch, damaged speakers. | Reduce gain. Adjust HPF/LPF settings. Verify speaker impedance. Inspect speakers for damage. |
| Ampko'taruvchi haddan tashqari qizib ketish | Insufficient ventilation, low impedance load, prolonged high volume use. | Atrofdagi havo oqimining to'g'ri bo'lishini ta'minlang ampko'targich. Karnay impedansini tekshiring. Ovoz balandligini pasaytiring yoki ruxsat bering ampsovutish uchun ko'targich. |
8. Texnik shartlar
| Xususiyat | Spetsifikatsiya |
|---|---|
| Model raqami | DX1800.5 |
| Brend | Matritsa |
| Kanallar soni | 5 |
| Maksimal quvvat chiqishi | 1800 vatt |
| RMS quvvati (4 Ohm) | 125W x 4 Ch. + 480W x 1 Ch. |
| RMS quvvati (2 Ohm) | 250W x 4 Ch. + 800W x 1 Ch. |
| Quvvatlantirish manbai | PWM DC to DC |
| Stereo Stability | 2 Ohm barqaror |
| Yuqori o'tish filtri (HPF) | Variable 40 Hz - 3 kHz |
| Past o'tish filtri (LPF) | Variable 40 Hz - 250 Hz |
| Bass Boost | 0/+6/+12 dB (Selectable) |
| Kanallarni ajratish | > 60 dB |
| Mahsulot o'lchamlari (U x G x Y) | 16.3 x 9.7 x 2 dyuym (41.4 x 24.6 x 5.1 sm) |
| Mahsulot og'irligi | 3.2 kg (7.05 funt) |
| Muvofiqlik | Idoralar, RoHS, FCC |
| UPC | 793276301031 |
9. Kafolat va qo'llab-quvvatlash
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Matrix websayt. Kafolat da'volari uchun xaridingizni tasdiqlovchi hujjatingizni saqlang.
For further assistance, you may contact Matrix customer support through their official channels.
