Kirish
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your robbe Happy-Fly Electric Glider Assembly Kit 3157. Please read this manual thoroughly before beginning assembly or operation to ensure safe and correct usage. This product is an electric glider model designed for enthusiasts aged 14 years and older.
Xavfsizlik ma'lumotlari
Always prioritize safety when assembling and operating your electric glider.
- Kattalar nazorati: This product is recommended for ages 14 and up. Younger users should always be supervised by an adult.
- Yig'ish: Follow all assembly instructions carefully. Incorrect assembly can lead to malfunction or injury.
- Batareya xavfsizligi: The product is battery-powered (batteries not included). Use only recommended battery types and follow all battery charging and handling safety guidelines. Do not short-circuit or expose batteries to extreme temperatures.
- Ishlash muhiti: Operate the glider in open, clear areas away from people, animals, buildings, power lines, and other obstacles. Avoid flying in strong winds or adverse weather conditions.
- Parvoz oldidan tekshirish: Always perform a thorough pre-flight check to ensure all components are securely attached and functioning correctly.
- Xizmat: Regularly inspect the glider for damage or wear. Do not operate a damaged glider.
- O'yinchoq emas: While categorized as a toy, this is a sophisticated model aircraft requiring careful handling and operation.
Paket tarkibi
The robbe Happy-Fly Electric Glider Assembly Kit 3157 includes the following components:
- Glider airframe components (wings, fuselage, tail sections)
- Electric motor and propeller assembly
- Control surfaces (ailerons, rudder, elevator)
- Small parts bag (screws, connectors, pushrods, hinges)
- Foydalanish bo'yicha qo'llanma (ushbu hujjat)
Eslatma: Batteries, charger, and remote control are kiritilmagan va alohida sotib olinishi kerak.
O'rnatish va yig'ish
Assembly of the Happy-Fly Electric Glider requires patience and attention to detail. Ensure you have a clean, well-lit workspace.
- Komponentlarni o'rash: Paketdagi barcha qismlarni ehtiyotkorlik bilan olib tashlang va paket tarkibidagi ma'lumotlar ro'yxati bilan taqqoslang.
- Fuzelaj yig'ilishi: Assemble the fuselage sections according to the diagrams. Secure all joints with appropriate adhesive (not included, recommended type specified in diagrams).
- Wing Attachment: Attach the wings to the fuselage. Ensure they are securely seated and aligned.
- Tail Section Installation: Install the horizontal and vertical stabilizers. Pay close attention to alignment for proper flight characteristics.
- Motor and Propeller: Mount the electric motor securely in its designated position. Attach the propeller, ensuring it is balanced and facing the correct direction for thrust.
- Control Surface Linkages: Connect the pushrods from the servos (if applicable, or direct linkages) to the control surfaces (ailerons, rudder, elevator). Ensure free movement and correct throw.
- Elektron qurilmalarni o'rnatish: Install your receiver, Electronic Speed Controller (ESC), and servos (if not pre-installed) into the fuselage. Secure wiring to prevent interference with moving parts.
- Batareya bo'limi: Ensure the battery compartment is accessible and secure for battery installation.
- Og'irlik markazi (CG): Crucially, balance the glider to achieve the recommended Center of Gravity (CG) as indicated in the assembly diagrams. This is vital for stable flight. Adjust battery position if necessary.
Figure 1: An assembled robbe Happy-Fly Electric Glider, showcasing its sleek white design with red "Happy-Fly" branding on the wings. The glider features a long, slender fuselage, broad wings, and a T-tail configuration, set against a clear blue background.
Foydalanish bo'yicha ko'rsatmalar
Once assembled and balanced, your Happy-Fly Electric Glider is ready for flight.
- Batareyani o'rnatish: Insert the fully charged flight battery into the designated compartment, ensuring it is secured and connected correctly to the ESC.
- Transmitterni sozlash: Turn on your remote control transmitter first, then power on the glider's receiver. Ensure proper binding between the transmitter and receiver.
- Tekshirish nazorati: Before launch, verify that all control surfaces (ailerons, elevator, rudder) respond correctly to transmitter inputs. Check for full and free movement.
- Ishga tushirish: For hand launch, hold the glider firmly and launch it into the wind with a gentle, level throw while applying throttle. For ground launch, ensure sufficient runway and apply throttle smoothly.
- Parvoz nazorati:
- Lift: Controls pitch (nose up/down).
- Rulda: Controls yaw (nose left/right).
- Aileronlar: Controls roll (wing tilt), used for banking turns.
- Trotle: Controls motor speed and altitude.
- Parvoz: Once at desired altitude, reduce or cut throttle to enter gliding mode. Utilize thermals for extended flight.
- Hodisa: Approach the landing area into the wind. Reduce throttle and gently guide the glider down, flaring just before touchdown to reduce speed.
- Parvozdan keyingi: Disconnect the flight battery from the glider first, then turn off your transmitter. Inspect the glider for any damage.
Xizmat
Regular maintenance will extend the lifespan and performance of your glider.
- Tozalash: Wipe down the airframe with a soft, damp cloth after each flight to remove dirt and debris. Avoid harsh chemicals.
- Tekshirish: Before and after each flight, inspect all components for cracks, dents, loose connections, or wear. Pay close attention to wings, tail, propeller, and control linkages.
- Pervanel tekshiruvi: Ensure the propeller is free from nicks or cracks. A damaged propeller can cause vibrations and reduce efficiency. Replace if necessary.
- Batareya parvarishi: Store batteries in a cool, dry place. Do not leave batteries fully charged or fully discharged for extended periods. Follow manufacturer guidelines for battery charging and storage.
- Saqlash: Store the glider in a safe place, away from direct sunlight, extreme temperatures, and moisture. Consider disassembling wings for compact storage if needed.
- Ehtiyot qismlar: Keep essential spare parts on hand, such as propellers, control horns, and pushrods, for quick repairs.
Muammolarni bartaraf qilish; nosozliklarni TUZATISH
Ushbu bo'lim siz duch kelishi mumkin bo'lgan umumiy muammolarni ko'rib chiqadi.
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Glider does not respond to controls. |
|
|
| Poor flight stability / difficult to control. |
|
|
| Motor not spinning or weak thrust. |
|
|
Texnik xususiyatlari
| Xususiyat | Tafsilot |
|---|---|
| Brend | talonchi |
| Model nomi | Happy-Fly Electric Glider (Bandit des phoques) |
| Model raqami | 229943 (Kit 3157) |
| Mahsulot turi | Electric Glider Assembly Kit |
| Tavsiya etilgan yosh | 14 yil va undan yuqori |
| Asosiy material | Plastik |
| Yig'ish talab qilinadi | Ha |
| Batareyalar talab qilinadi | Ha (qo'shilmagan) |
| Masofadan boshqarish pulti kiritilgan | Yo'q |
| Quvvat manbai | Batareyadan quvvatlanadi |
| Maxsus xususiyat | Elektr |
| Multfilm qahramoni | Bandit des phoques (Seal Bandit) |
Kafolat va qo'llab-quvvatlash
Information regarding specific warranty terms for the robbe Happy-Fly Electric Glider Assembly Kit 3157 is not provided in this manual. Please refer to the original product packaging or contact robbe customer support directly for warranty details and technical assistance.
For further support or to inquire about spare parts availability, please visit the official robbe websaytga kiring yoki mahalliy distribyutoringizga murojaat qiling.
Ishlab chiqaruvchi: Robbe Modellsport
Mahsulot haqida ma'lumot: 229943
