PerTronix Ignitor Electronic Ignition Conversion Kit

Kirish

This manual provides comprehensive instructions for the installation, operation, and maintenance of your PerTronix Ignitor Electronic Ignition Conversion Kit. Designed to replace outdated mechanical points, this kit enhances your engine's efficiency and performance while preserving the classic appearance under the hood. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Xavfsizlik ma'lumotlari

• Always disconnect the vehicle's battery before beginning any electrical work to prevent accidental short circuits or injury.
• Ensure the engine is cool before working on ignition components.
• Tegishli shaxsiy himoya vositalarini, shu jumladan xavfsizlik ko'zoynaklari va qo'lqoplarni taqing.
• Agar biron bir qadam haqida ishonchingiz komil bo'lmasa, malakali avtomobil ustasiga murojaat qiling.
• This product is designed for specific applications. Verify compatibility with your vehicle's distributor before installation.

Qutida nima bor

Your PerTronix Ignitor Electronic Ignition Conversion Kit includes the following components:

• Ignitor moduli
• Magnet Sleeve/Collar
• Simlarni bog'lash
• O'rnatish uskunalari (agar mavjud bo'lsa)

Image: The PerTronix Ignitor Electronic Ignition Conversion Kit, showing the main module with wiring, and the separate magnet sleeve. This kit is designed to replace traditional points in a distributor.

O'rnatish va o'rnatish

The PerTronix Ignitor is designed for straightforward installation into your existing distributor. Follow these steps carefully:

1. Tayyorlanishi: Disconnect the vehicle's battery. Remove the distributor cap and rotor. Carefully remove the existing mechanical points and condenser from the distributor.
2. Install Magnet Sleeve: Slide the provided magnet sleeve onto the distributor shaft, ensuring it fits securely over the cam lobes. This sleeve contains the cobalt magnets that interact with the Hall Effect sensor.
3. Mount Ignitor Module: Install the Ignitor module in the position previously occupied by the points. Secure it using the provided hardware. Ensure the module is flat and stable.
4. Simli ulanishlar:
   • Connect the red wire from the Ignitor module to the positive (+) side of the ignition coil.
   • Connect the black wire from the Ignitor module to the negative (-) side of the ignition coil.
   • Ensure all connections are clean and secure. Avoid routing wires near hot or moving engine components.
5. Qayta yig'ish: Reinstall the distributor rotor and cap. Reconnect the vehicle's battery.
6. Dastlabki ishga tushirish: Start the engine. The Ignitor system is designed for stable, adjustment-free timing. No timing adjustments are typically necessary after installation, as the system provides precise timing.

Rasm: yaqinroq view of the PerTronix Ignitor module and the magnet sleeve, highlighting the key components involved in the conversion from mechanical points to electronic ignition.

Operatsiya va imtiyozlar

The PerTronix Ignitor system replaces the mechanical points and condenser with a reliable electronic switching device. This advanced technology utilizes rotating cobalt magnets paired with a Hall Effect integrated circuit, ensuring precise timing without the wear and tear of moving parts.

Key benefits of the Ignitor system include:

• Kengaytirilgan ishlash: Doubles the voltage delivered to your spark plugs, leading to increased horsepower and improved fuel economy.
• Extended Spark Plug Life: More efficient spark delivery contributes to longer spark plug lifespan.
• Texnik xizmat ko'rsatilmaydi: The robust, epoxy-molded design is impervious to dirt, oil, grease, and moisture, eliminating the need for routine maintenance associated with mechanical points.
• Stable Timing: Provides consistent and precise timing, which does not require adjustment once installed.
• Clean Engine Bay: Integrates seamlessly into your existing distributor, avoiding the need for an external ignition box and preserving the classic under-hood appearance.

Image: A graph illustrating the energy output (in Millijoules) of the Ignitor system with a Flame-Thrower Coil compared to a typical breaker point ignition system across various engine RPMs. The Ignitor system consistently delivers higher energy.

Xizmat

The PerTronix Ignitor Electronic Ignition Conversion Kit is designed to be virtually maintenance-free. Its epoxy-molded construction protects internal components from environmental factors such as dirt, oil, grease, and moisture. No periodic adjustments or lubrication are required, unlike traditional mechanical points.

Regularly inspect the wiring connections for any signs of wear or corrosion to ensure optimal performance and longevity of the system.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your PerTronix Ignitor system, consider the following troubleshooting steps:

• No Spark/Engine Not Starting:
  • Verify all wiring connections are secure and correctly routed (red to coil positive, black to coil negative).
  • To'g'ri jildni tekshiringtage at the ignition coil. Ensure the coil is compatible with the Ignitor system (most point type ignition coils are compatible).
  • Inspect the magnet sleeve on the distributor shaft to ensure it is properly seated and intact. A dislodged or damaged magnet can prevent proper operation.
  • Ensure the Ignitor module is securely mounted and not loose.
• Rough Idling/Misfires:
  • While the Ignitor provides stable timing, ensure other ignition components (spark plugs, plug wires, rotor, distributor cap) are in good condition.
  • Check for proper grounding of the distributor and engine.
• Vaqti-vaqti bilan ishlash:
  • This could indicate a loose connection or a failing component. Re-check all wiring.
  • Ensure the module is not overheating due to poor mounting or external heat sources.

If problems persist after following these steps, it is recommended to consult a professional automotive technician or contact PerTronix customer support.

Texnik xususiyatlari

Image: A detailed comparison table outlining features of the PerTronix Ignitor, Ignitor II, and Ignitor III electronic ignition systems, showing which features are present in each model, such as stable timing, epoxy molding, Hall Effect circuit, and CARB legality.

Kafolat va qo'llab-quvvatlash

Specific warranty details for the PerTronix Ignitor Electronic Ignition Conversion Kit are typically provided with the product packaging or can be found on the official PerTronix website. Please refer to these resources for the most accurate and up-to-date warranty information.

For technical support, installation assistance, or warranty claims, please contact PerTronix customer service directly. Contact information can usually be found on their official websayt yoki mahsulot hujjatlarida.