Robinair RG3 ko'chma sovutgichni qayta tiklash mashinasi foydalanuvchi qo'llanmasi

1. Kirish

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Robinair RG3 Portable Refrigerant Recovery Machine. The RG3 is designed for recovering both liquid and vapor refrigerants, including common CFC, HFC, and HCFC types like R-410A. Its compact and lightweight design makes it suitable for various residential and appliance-sized recovery tasks.

2. Xavfsizlik ma'lumotlari

WARNING: Always read and understand all safety precautions before operating this equipment. Failure to do so may result in serious injury or equipment damage.

• Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling refrigerants.
• Ensure adequate ventilation in the work area to prevent accumulation of refrigerant vapors.
• Do not exceed the maximum operating pressure of the recovery machine or the recovery tank. The RG3 features a high-pressure safety shut-off switch that activates if pressure rises above 550 PSI.
• Use only approved recovery tanks and hoses designed for refrigerant recovery.
• Never mix different refrigerants in the same recovery tank.
• Har qanday texnik xizmat ko'rsatish yoki xizmat ko'rsatishdan oldin elektrni uzing.
• Refer to local, state, and federal regulations regarding refrigerant handling and disposal.

3. Paket tarkibi

Paketni ochishda barcha narsalar mavjudligini tekshiring:

• Robinair RG3 Portable Refrigerant Recovery Machine Unit
• Yo'riqnoma
• IEC Connector and Power Cord
• Inline Filter and Stub Hose (typically included)

4. Mahsulot xususiyatlari

The Robinair RG3 is engineered with the following key features:

• Yilni va engil: Weighing approximately 18 lbs with a small footprint (6.5 x 9.5 x 12.5 inches), ensuring superior portability.
• Oil-less Compressor: A 1/3 HP, 115V AC, 60 Hz single-cylinder compressor capable of recovering both liquid and vapor refrigerants.
• Wide Refrigerant Compatibility: Works with all common CFC, HFC, and HCFC refrigerants, including R-410A.
• High Efficiency Cross Flow Design: Optimized fan and condenser layout for reduced cycle times.
• High Pressure Safety Shut-off Switch: Automatically deactivates the machine if internal pressure exceeds 550 PSI, enhancing safety.
• Foydalanuvchi uchun qulay boshqaruvlar: Features easy-to-read gauges and simple two-valve operation.
• Rugged Case: Durable construction designed to withstand daily use.

5. Sozlash

Follow these steps to prepare your RG3 for operation:

1. Paketdan chiqarib oling va tekshiring: Carefully remove the unit from its packaging and inspect for any shipping damage. Ensure all components listed in the "Package Contents" section are present.
2. Mashinani joylashtiring: Place the RG3 on a stable, level surface in a well-ventilated area.
3. Quvvatni ulash: Connect the provided IEC power cord to the machine and then to a grounded 115V AC, 60Hz power outlet.
4. Shlanglarni ulash:
   • Connect the appropriate service hose from the system to be recovered to the "IN" port of the RG3.
   • Connect another service hose from the "OUT" port of the RG3 to your recovery tank. Ensure all connections are tight to prevent leaks.
   • An inline filter should be installed on the inlet side to protect the machine from contaminants.
5. Prepare Recovery Tank: Ensure your recovery tank is empty, evacuated, and within its certification date. Weigh the tank before starting recovery to monitor refrigerant quantity.

1-rasm: Old view of the Robinair RG3 Portable Refrigerant Recovery Machine, showing gauges, control valves, and connection ports.

6. Foydalanish bo'yicha ko'rsatmalar

The RG3 is designed for straightforward operation. Always refer to the specific instructions for the refrigerant type you are recovering.

6.1. Liquid Refrigerant Recovery

1. Ensure all hose connections are secure and valves on the recovery tank are open.
2. Turn the "IN" valve on the RG3 to the "LIQUID" position.
3. Turn the "OUT" valve on the RG3 to the "OPEN" position.
4. Turn on the power switch for the RG3. The machine will begin recovering liquid refrigerant.
5. Monitor the gauges. Once liquid recovery slows or stops, proceed to vapor recovery.

6.2. Vapor Refrigerant Recovery

1. After liquid recovery, turn the "IN" valve on the RG3 to the "VAPOR" position.
2. Ensure the "OUT" valve remains in the "OPEN" position.
3. The machine will continue to recover vapor refrigerant. Allow the machine to run until the system pressure reaches a deep vacuum (e.g., -20 to -25 inches of mercury, depending on refrigerant and ambient temperature).
4. Once recovery is complete, turn off the RG3 power switch.
5. Close the valves on the recovery tank and then on the RG3.
6. Carefully disconnect the hoses, being mindful of any residual pressure.

Figure 2: A technician operating the Robinair RG3 machine during a refrigerant recovery process on an outdoor HVAC system.

7. Xizmat ko'rsatish

Regular maintenance ensures the longevity and optimal performance of your RG3 unit.

• Filtrni almashtirish: The inline filter on the inlet port should be regularly inspected and replaced as needed to prevent contaminants from entering the machine. A clogged filter can reduce recovery efficiency.
• Tozalash: Keep the exterior of the machine clean. Use a damp cloth to wipe down surfaces. Do not use harsh chemicals or solvents.
• Saqlash: When not in use, store the RG3 in a clean, dry environment, protected from extreme temperatures and direct sunlight.
• Shlangi tekshirish: Periodically inspect all hoses for cracks, wear, or damage. Replace damaged hoses immediately.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

This section addresses common issues you might encounter with your RG3.

9. Texnik shartlar

• Model: RG3
• jildtage: 115 volt, 60 Gts
• Kompressor: 1/3 HP, Oil-less
• Sovutgich mosligi: CFC, HFC, HCFC (including R-410A)
• High Pressure Shut-off: 550 PSI
• Mahsulot og'irligi: Taxminan 18 funt
• Mahsulot o'lchamlari: 6.5 x 9.5 x 12.5 dyuym (U x G x Y)

10. Kafolat haqida ma'lumot

For detailed warranty information, please refer to the warranty card included with your product or visit the official Robinair websayt. Kafolat shartlari va shartlari mintaqaga va sotib olingan sanaga qarab farq qilishi mumkin.

11. Mijozlarni qo'llab-quvvatlash

If you require assistance, have questions about your Robinair RG3, or need technical support, please contact Robinair customer service. Contact information can typically be found on the Robinair websaytida yoki qurilmangiz bilan birga taqdim etilgan hujjatlarda.

ga ham tashrif buyurishingiz mumkin Robinair Store on Amazon qo'shimcha mahsulot haqida ma'lumot va resurslar uchun.