RGBZONE Mini 24-Key IR Wireless RGB LED Controller User Manual

Kirish

This manual provides comprehensive instructions for the installation, operation, and maintenance of your RGBZONE Mini 24-Key IR Wireless RGB LED Controller. This controller is designed for use with SMD 3528, 5050, and 5630 RGB LED light strips, offering 16 color options and 4 dynamic light patterns. Please read this manual thoroughly before use to ensure proper functionality and safety.

Image: The RGBZONE Mini 24-Key IR Wireless RGB LED Controller and its accompanying 24-key remote control.

Paket tarkibi

Paketda barcha elementlar mavjudligiga ishonch hosil qiling:

• 1 x IR LED Controller
• 1 x 24 Key IR Remote Control
• 1 x foydalanuvchi qo'llanmasi

Texnik xususiyatlari

O'rnatish bo'yicha ko'rsatmalar

Follow these steps to connect your RGB LED controller:

1. LED tasmasini ulang: Locate the 4-pin connector on your RGB LED strip. Align the pins with the 4-pin output connector on the IR LED controller. Ensure the arrow on the controller connector aligns with the arrow on the LED strip connector.
2. Quvvat manbaini ulang: Connect your DC 5V-24V power supply to the DC input jack on the IR LED controller. The controller supports input voltag5 V dan 24 V gacha.
3. Position the IR Receiver: Ensure the infrared signal receiver (small black component on a wire) is positioned in a location where it has a clear line of sight to the remote control. Obstructions will interfere with signal reception.

Image: Connection diagram illustrating how to connect the IR LED controller to an LED strip and a power supply. The diagram highlights the IR receiver and the importance of aligning arrows on connectors.

Image: A detailed diagram showing the connections between the remote controller, power supply, IR reception, and LED strip. It emphasizes that LED strips and power supplies are not included.

Muhim eslatma:

• This controller is for RGB (4-pin) LED strips only. It is not compatible with RGBW (5-pin) strips.
• Kiritilgan hajmga ishonch hosil qilingtage of your power supply matches the requirements of your LED strip and is within the controller's 5V-24V range.
• Before first use, remove the plastic insulation tab from the remote control's battery compartment.

Foydalanish bo'yicha ko'rsatmalar

Use the 24-key IR remote control to operate your LED strips. Point the remote directly at the IR signal receiver on the controller for optimal performance.

Image: A visual guide to the 24-key IR remote control, detailing the function of each button, including power, brightness adjustment, 16 color selections, and 4 mode buttons (Flash, Strobe, Fade, Smooth).

Masofadan boshqarish funksiyalari:

• ON/OFF: Turns the LED strip on or off.
• Yorqinlik +/-: Adjusts the brightness level of the selected color or mode.
• R, G, B, W: Direct selection for Red, Green, Blue, and White colors.
• 12 Color Buttons: Selects various preset static colors.
• FLASH: Activates a rapid flashing effect.
• QARShI: Activates a slow flashing effect.
• SOCHDI: Cycles through colors with a smooth transition.
• MUZ: Cycles through colors with a gradual, continuous change.

Image: Illustration demonstrating the remote control's effective range of 16-26 feet (5-8 meters) and the requirement to point the remote directly at the IR sensor without obstructions.

Xizmat

Masofadan boshqarish pultidagi batareyani almashtirish:

The remote control uses a CR2025 3V lithium coin cell battery. To replace the battery:

1. Locate the battery tray on the side or back of the remote.
2. Push the small tab or lever to release the tray.
3. Slide the old CR2025 battery out.
4. Yangi CR2025 batareyasini musbat (+) tomoni yuqoriga qaratib joylashtiring.
5. Batareya patnisini joyiga chertayotgan ovoz chiqquncha pultga qaytaring.

Image: Step-by-step visual guide on how to remove the CR2025 battery from the remote control, showing to push inwards then outwards.

Tozalash:

Wipe the controller and remote with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

• LED strip does not light up:
  • Xavfsizligiga ishonch hosil qilish uchun barcha ulanishlarni tekshiring.
  • Verify the power supply is functioning and providing the correct voltage (5V-24V).
  • Ensure the arrow on the controller's output connector aligns with the arrow on the LED strip's input.
  • Confirm the LED strip itself is functional.
• Masofadan boshqarish pulti ishlamayapti:
  • Ensure the plastic insulation tab has been removed from the battery compartment.
  • Replace the CR2025 battery if it is depleted.
  • Point the remote directly at the IR signal receiver on the controller.
  • Remove any obstructions between the remote and the receiver.
• Colors are incorrect or mixed:
  • This controller is designed for standard RGB wiring. If your LED strip has a different wiring order (e.g., GRB, BRG), the colors may not match the remote buttons. There is no setting on this controller to change the output order.
  

  Image: A diagram showing different RGB wiring configurations and indicating which one is compatible with the controller for correct color display.

Xavfsizlik ma'lumotlari

• This device is intended for indoor use only. Do not expose to moisture or extreme temperatures.
• Elektr ta'minoti voltage is compatible with both the controller and the LED strip.
• Do not exceed the maximum output current (6A) or wattage (144W at 24V) of the controller.
• Bolalar qo'li etmaydigan joyda saqlang.
• Do not attempt to disassemble or modify the controller or remote control.

Kafolat va qo'llab-quvvatlash

For warranty information or technical support, please refer to the product packaging or contact RGBZONE customer service through their official channels. You can visit the RGBZONE Store mahsulot haqida ko'proq ma'lumot olish uchun.