Behringer SD16 I/OStage Box foydalanuvchi qo'llanmasi

1. tugadiview

The Behringer SD16 is a robust I/O Stage Box designed for professional audio applications. It features 16 Midas-designed, fully programmable microphone preamplifiers, ensuring high-quality audio capture. The unit also provides 8 analog outputs for versatile signal routing. Connectivity is enhanced through AES50 networking with Klark Teknik SuperMac technology and ULTRANET integration for personal monitoring systems.

Rasm: old view of the Behringer SD16 I/O Stage Box, showcasing its 16 input channels and 8 output channels, along with AES50 and ULTRANET ports.

2. Sozlash

Proper setup is crucial for optimal performance of your SD16 Stage Box. Follow these steps to integrate the unit into your audio system:

1. Quvvat ulanishi: Connect the supplied AC power cable to the IEC inlet on the rear panel of the SD16 and then to a suitable power outlet. Ensure the power switch is in the 'off' position before connecting.
2. AES50 Network Connection: Use a shielded CAT5e Ethernet cable to connect the AES50 'A' or 'B' port on the SD16 to a compatible digital mixer or other AES50 device. The AES50 ports utilize Klark Teknik SuperMac technology for low-latency digital audio transmission.
3. ULTRANET Personal Monitoring: For integration with Behringer Powerplay P16 personal monitoring systems, connect a CAT5e Ethernet cable from the ULTRANET port on the SD16 to your P16-M personal mixer or P16-D distribution hub.
4. Kirish ulanishlari: Connect your microphones and other audio sources to the 16 XLR/TRS combo input jacks on the front panel. These inputs feature Midas-designed preamps.
5. Chiqish ulanishlari: Connect your monitoring systems, amplifiers, or other destination devices to the 8 XLR output jacks on the front panel.

Video: A closer look at the Behringer SD16, demonstrating the connection of the power cable, and highlighting the AES50 network port, ULTRANET integration, and 8 outputs.

3. Foydalanish bo'yicha ko'rsatmalar

Once the SD16 is physically connected, power on the unit. The AES50 status LEDs (A and B) will indicate network activity. A green LED signifies a stable connection, while a red LED indicates an issue. The SD16's Midas preamps are remote-controllable from your connected digital mixer, allowing for gain adjustments and phantom power activation directly from the console.

• Kirish daromadini boshqarish: Adjust the gain for each of the 16 inputs remotely from your digital mixer.
• Fantom quvvati: Activate 48V phantom power for condenser microphones as needed, controlled from your digital mixer.
• Chiqish marshruti: Route signals from your digital mixer to the 8 analog outputs of the SD16 for stage monitors, in-ear systems, or other destinations.
• Personal Monitoring: If using ULTRANET, individual musicians can control their monitor mixes via connected P16-M units, receiving up to 16 channels of audio from the SD16.

4. Xizmat ko'rsatish

To ensure the longevity and reliable operation of your Behringer SD16, observe the following maintenance guidelines:

• Tozalash: Regularly clean the exterior of the unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or internal components.
• Ventilyatsiya: Ensure that the ventilation grilles on the unit are not obstructed to prevent overheating. Adequate airflow is essential for proper operation.
• Saqlash: When not in use, store the SD16 in a cool, dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
• Quvvat aylanishi: For extended periods of non-use, it is recommended to power off the unit to prevent potential issues related to continuous operation and heat buildup.

5. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your Behringer SD16, consider the following troubleshooting steps:

• Quvvat yo'q: Verify that the power cable is securely connected to both the SD16 and the power outlet. Check the power switch position.
• Audio kirish/chiqish yo'q: Ensure all XLR and CAT5e cables are correctly and securely connected. Check the AES50 status LEDs; a red light indicates a network issue. Verify input gain settings and output routing on your digital mixer.
• Intervalli audio: Check for loose cable connections. Ensure that the CAT5e cable used for AES50 is shielded and of appropriate length (typically up to 100 meters).
• Masofadan boshqarish bilan bog'liq muammolar: Confirm that your digital mixer is properly configured to recognize and control the SD16 via the AES50 network. Refer to your mixer's manual for specific setup instructions.
• Haddan tashqari qizib ketish: Ensure the unit has adequate ventilation and is not placed in an enclosed space. If the unit feels excessively hot, power it off and allow it to cool before resuming operation.

6. Texnik shartlar

7. Qutida nima bor

The Behringer SD16 I/O Stage Box package includes:

• 1x SD16 I/O Box (16 Preamps, 8 Outputs)
• 1x AC quvvat kabeli
• Foydalanuvchi hujjatlari (ushbu qo'llanma)

8. Kafolat haqida ma'lumot

The Behringer SD16 I/O Stage Box is covered by a 3 Yil Cheklangan Kafolat. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official Behringer websayt yoki mijozlarni qo'llab-quvvatlash xizmatiga murojaat qiling.

9. Mahsulotni qo'llab-quvvatlash

For further assistance, technical support, or service inquiries regarding your Behringer SD16 I/O Stage Box, please visit the official Behringer websayt. The website provides access to FAQs, software downloads, and contact information for customer service representatives.

Behringer rasmiysi Websayt: www.behringer.com