1. Kirish
This manual provides essential information for the safe installation, operation, and maintenance of your Ducasa Ducaverre White 1200W Glass Radiant Panel Heater. Please read these instructions carefully before use and retain them for future reference.
1.1 Xavfsizlik ma'lumotlari
- Elektr xavfsizligi: Always ensure the heater is connected to a properly grounded electrical outlet. Do not operate with a damaged cord or plug.
- Joylashtirish: Maintain a safe distance from flammable materials (curtains, furniture) as indicated in the installation section. Do not cover the heater.
- Suvga ta'sir qilish: Do not install the heater near water sources (bathrooms, laundry rooms) unless specifically rated for such environments. Avoid direct water spray.
- Children and Vulnerable Individuals: Ushbu jihozdan 8 yosh va undan katta yoshdagi bolalar hamda jismoniy, hissiy yoki aqliy qobiliyatlari cheklangan yoki tajribasi va bilimi bo'lmagan shaxslar tomonidan nazorat qilinsa yoki jihozdan xavfsiz foydalanish bo'yicha ko'rsatma berilgan bo'lsa va xavflarni tushunsa foydalanishi mumkin. . Bolalar qurilma bilan o'ynamasligi kerak. Tozalash va foydalanuvchiga texnik xizmat ko'rsatish bolalar tomonidan nazoratsiz amalga oshirilmasligi kerak.
- Xizmat: Disconnect from power before cleaning or performing any maintenance.
1.2 Paket tarkibi
Paketda barcha komponentlar mavjudligiga ishonch hosil qiling:
- Ducasa Ducaverre 1200W Glass Radiant Panel Heater
- Wall Mounting Bracket(s)
- O'rnatish vintlari va devor vilkalari
- Foydalanuvchi uchun qo'llanma (ushbu hujjat)
2. O'rnatish va o'rnatish
Proper installation is crucial for the safe and efficient operation of your heater. If you are unsure about any step, consult a qualified electrician.
2.1 Devorga o'rnatish
The Ducasa Ducaverre heater is designed for wall mounting. Choose a suitable location away from direct drafts, windows, and areas where it might be accidentally covered. Ensure there is sufficient clearance around the heater as specified in the diagram below.
1-rasm: Ducasa Ducaverre 1200W Glass Radiant Panel Heater mounted on a wall in a modern living room setting. The heater is white and rectangular, positioned low on the wall, illustrating a typical installation scenario.
- Belgilash: Hold the mounting bracket against the wall at the desired height. Use a pencil to mark the drilling points.
- Burg'ulash: Belgilangan nuqtalarda devoringiz turiga mos keladigan burg'ulash uchi yordamida teshiklar oching. Devorga o'rnatiladigan tiqinlarni joylashtiring.
- Qavsni biriktirish: Secure the mounting bracket to the wall using the provided screws. Ensure it is level and firmly attached.
- Isitgichni o'rnatish: Carefully lift the heater and hook it onto the mounting bracket. Ensure it clicks securely into place. Some models may require additional screws to fix the heater to the bracket from below.
2.2 Elektrga ulanish
Once mounted, connect the heater to a standard electrical outlet. Ensure the outlet is easily accessible and rated for the heater's power consumption (1200W). Do not use extension cords or multi-plugs unless absolutely necessary and only if they are rated for the heater's power.
3. Foydalanish bo'yicha ko'rsatmalar
Your Ducasa Ducaverre heater features an intuitive control panel for setting temperature and operating modes.
2-rasm: Yaqindan suratga olish view of the black control panel located on the top right side of the white Ducasa Ducaverre heater. The panel features a digital display and several buttons labeled 'OK', '+', '-', 'MODE', and 'PROG', indicating user interface for settings and programming.
3.1 Boshqaruv paneli tugadiview
- Raqamli displey: Shows current temperature, set temperature, and operating mode.
- MODE tugmasi: Cycles through operating modes (Comfort, Eco, Frost Protection, Program).
- '+' / '-' Buttons: Adjust temperature settings or navigate menu options.
- OK tugmasi: Tanlovlarni tasdiqlaydi.
- PROG tugmasi: Accesses programming functions.
3.2 Vaqt va kunni belgilash
Before using programmed modes, set the current time and day:
- ni bosing va ushlab turing REJIM button until the time setting appears.
- Foydalanish '+' or '-' soatni sozlash uchun tugmasini bosing, so'ngra OK.
- Repeat for minutes and day of the week.
3.3 Ishlash rejimlari
- Konfor rejimi (C): Maintains your desired set temperature. Use '+' or '-' haroratni sozlash uchun.
- Eco Mode (E): Maintains a temperature typically 3-4°C lower than the Comfort setting, saving energy.
- Frost Protection Mode (F): Maintains a minimum temperature (e.g., 7°C) to prevent freezing.
- Program Mode (P): Follows a pre-set weekly heating schedule.
3.4 Programming a Weekly Schedule
To set a custom heating schedule:
- ni bosing PROG button. The display will show the current day and a time segment.
- Foydalanish REJIM to select the desired operating mode (Comfort, Eco, Frost Protection) for that specific hour.
- Foydalanish '+' to advance to the next hour or '-' orqaga qaytish.
- Repeat for all 24 hours of the day.
- bosing PROG again to move to the next day.
- Once all days are programmed, press OK saqlash va chiqish uchun.
4. Xizmat ko'rsatish
Muntazam tozalash optimal ishlashni ta'minlaydi va isitgichingizning ishlash muddatini uzaytiradi.
4.1 Tozalash
- Quvvatni uzish: Always unplug the heater from the electrical outlet before cleaning.
- Tashqi: Wipe the glass panel and exterior surfaces with a soft, damp mato. Abrasiv tozalash vositalari, erituvchilar yoki kuchli kimyoviy moddalardan foydalanmang, chunki ular qoplamaga zarar etkazishi mumkin.
- Chang: Use a soft brush or vacuum cleaner with a brush attachment to remove dust from air inlets and outlets.
- Quritish: Ensure the heater is completely dry before plugging it back in.
4.2 Saqlash
If storing the heater for an extended period, ensure it is clean and dry. Store it in its original packaging or a protective cover in a cool, dry place, away from direct sunlight and extreme temperatures.
5. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
Agar siz isitgichingiz bilan bog'liq muammolarga duch kelsangiz, quyidagi keng tarqalgan muammolar va yechimlarga murojaat qiling:
- Isitgich yoqilmaydi:
- Elektr shnuri ishlaydigan rozetkaga mahkam ulanganligini tekshiring.
- O'chirish to'xtatuvchisi o'chmaganligini tekshiring.
- Ensure the heater is not in standby mode.
- Heater is on but not heating:
- Check the set temperature; it might be lower than the ambient room temperature.
- Ensure the heater is not in Frost Protection mode if you expect higher heat output.
- Verify that no objects are obstructing the air vents.
- G'ayrioddiy shovqinlar:
- Minor expansion/contraction noises are normal during heating and cooling cycles.
- If noises are loud or persistent, disconnect power and contact support.
- Xato kodlari: If an error code appears on the display, note the code and consult the manufacturer's support or a qualified technician.
If the problem persists after attempting these solutions, disconnect the heater from the power supply and contact customer support.
6. Texnik shartlar
- Model: Ducasa Ducaverre 1200W
- Turi: Glass Radiant Panel Heater
- Chiqish quvvati: 1200 Vt
- jildtage: 230V ~ 50Hz (Standard European)
- Material: Shisha old panel
- O'rnatish: Devorga o'rnatilgan
- O'lchamlari: Mahsulot qadoqiga yoki ishlab chiqaruvchining ko'rsatmalariga qarang website for exact measurements.
- ASIN: B01HZMXDAY
3-rasm: A full, slightly angled view of the Ducasa Ducaverre 1200W Glass Radiant Panel Heater. The heater is white with a sleek glass surface, and the 'ducasa' brand name is visible on the top right, along with the small digital control panel.
7. Kafolat va qo'llab-quvvatlash
Your Ducasa Ducaverre heater is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Ducasa webbatafsil shartlar va shartlar uchun sayt.
For technical assistance, spare parts, or warranty claims, please contact Ducasa customer support through their official channels. Have your product model and ASIN (B01HZMXDAY) ready when contacting support.
