PCE Instruments PCE-170 A

PCE Instruments PCE-170 Yorug'lik o'lchagichi foydalanuvchi qo'llanmasi

Model: PCE-170 A

1. Kirish

This manual provides comprehensive instructions for the safe and effective use of the PCE Instruments PCE-170 A Light Meter. This device is designed for measuring illuminance (lux or foot-candles) in various environments, such as offices, factories, and outdoor settings. It features a wide measurement range, fast response time, and a compact design for ease of use.

Iltimos, qurilmani ishlatishdan oldin ushbu qo'llanmani diqqat bilan o'qib chiqing va uni kelajakda foydalanish uchun saqlab qo'ying.

2. Xavfsizlik ma'lumotlari

Observe the following safety precautions to prevent injury and avoid damage to the device:

3. Mahsulot tugadiview

The PCE-170 A Light Meter consists of a main unit with a display and control buttons, and an integrated light sensor.

PCE-170 A Light Meter front view

1-rasm: Old view of the PCE-170 A Light Meter, showing the display, control buttons, and light sensor at the top.

3.1 ta komponent

Close-up of PCE-170 A Light Meter display

2-rasm: Rasmni yaqinlashtirib olish view of the LCD display, showing a reading of "534 lx" and "AUTO RANGE 4 000".

Close-up of PCE-170 A Light Meter sensor

3-rasm: Batafsil view of the light sensor at the top of the device, with its protective cap removed.

4. Sozlash

4.1 Batareyani o'rnatish

  1. Qurilmaning orqa tarafidagi batareya bo'limi qopqog'ini toping.
  2. Slide the cover open or unscrew it, depending on the model.
  3. Insert one 9V battery, observing the correct polarity (+/-).
  4. Batareya bo'limi qopqog'ini mahkam o'rniga qo'ying.
PCE-170 A Light Meter with carrying case and 9V battery

4-rasm: The PCE-170 A Light Meter shown with its carrying case and the included 9V battery, ready for installation.

4.2 Dastlabki yoqish

ni bosing Quvvat button to turn on the device. The display will illuminate and show a reading. If the battery symbol appears, replace the battery.

5. Foydalanish bo'yicha ko'rsatmalar

5.1 O'lchovni o'tkazish

  1. yordamida qurilmani yoqing Quvvat tugmasi.
  2. Ensure the light sensor is clean and unobstructed.
  3. Position the light sensor at the location where illuminance is to be measured. Ensure the sensor is facing the light source directly for accurate readings.
  4. The current illuminance value will be displayed on the LCD.
Person using PCE-170 A Light Meter in an office setting

5-rasm: A user measuring light levels in an office environment with the PCE-170 A Light Meter.

5.2 Changing Measurement Units (fc/lx)

ni bosing fc/lx button to toggle between foot-candles (fc) and lux (lx) units. The selected unit will be indicated on the display.

5.3 HOLD funktsiyasi

ni bosing TUTING button to freeze the current reading on the display. Press it again to release the hold and resume live measurements.

5.4 Zero Adjustment (CAL)

Nolinchi sozlashni amalga oshirish uchun:

  1. Place the light sensor in a completely dark environment (e.g., cover it with the protective cap or place it in a dark box).
  2. ni bosing KAL button. The display should show "0.00" or a value very close to zero.
  3. If the display does not show zero, repeat the process.

5.5 Diapazonni tanlash

The device typically operates in auto-ranging mode. To manually select a range or cycle through available ranges, press the RANGE button. The display will indicate the active range. Press and hold the RANGE button to return to auto-ranging mode.

5.6 Min/Max Function (Power-Up Option)

The PCE-170 A supports Min/Max recording. To activate this feature, refer to the power-up options indicated on the device label (e.g., press and hold a specific button during power-on). This function records the minimum and maximum illuminance values detected during a measurement session.

6. Xizmat ko'rsatish

6.1 Tozalash

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the light sensor clean and free of dust or smudges, as this can affect measurement accuracy.

6.2 Saqlash

When not in use, store the PCE-170 A Light Meter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

MuammoMumkin sababYechim
Qurilma yoqilmagan.O'lik yoki noto'g'ri o'rnatilgan batareya.Batareyaning kutupluluğunu tekshiring yoki yangi 9V batareya bilan almashtiring.
Display shows "OL" (Overload).Light intensity exceeds the current measurement range.Switch to a higher measurement range using the RANGE button, or move to a less intensely lit area.
Noto'g'ri o'qishlar.Dirty sensor, incorrect zero adjustment, or sensor not facing light source correctly.Clean the sensor, perform zero adjustment in darkness, and ensure the sensor is properly oriented.
Displey bo'sh yoki miltillaydi.Kam batareya.9V batareyani almashtiring.

8. Texnik shartlar

ParametrQiymat
O'lchov diapazonlari0.00 ... 40,000 lux / 0.000 ... 4000 fc
Rezolyutsiya0.01 lyuks / 0.001 fc
Aniqlik±3% of measurement value + 5 digits
Haddan tashqari yuk ko'rsatkichi"OL"
O'lchov darajasiHar 2 soniyada
Ishlash harorati0 ... 40°C / 32 ... 104°F
Nur sensoriSilicon photodiode, corrected cosine angle
Displey5 raqamli LCD displey
Quvvat manbai9V batareya (shu jumladan)
O'lchamlari33 x 54 x 196 mm / 1.3 x 2.1 x 7.7 dyuym
Og'irligi180 g / <1 lb (approx. 9.17 ounces)

8.1 Yetkazib berish doirasi

The standard delivery package includes:

9. Kafolat va qo'llab-quvvatlash

PCE Instruments provides a warranty for this product against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official PCE Instruments website. For technical support, service, or calibration inquiries, please contact PCE Instruments customer service.

PCE Instruments US: Do'konga tashrif buyuring

Tegishli hujjatlar - PCE-170 A

Oldindanview PCE-170 Mini Lux Meter foydalanish bo'yicha qo'llanma
PCE Ibérica tomonidan ishlab chiqarilgan PCE-170 A Mini Lux Meter uchun qo'llanma, uning texnik xususiyatlari, ishlashi, xavfsizlik choralari va texnik xizmat ko'rsatish bo'yicha batafsil ma'lumotlari.
Oldindanview PCE-4XX-EKIT Tashqi shovqin o'lchagich to'plami foydalanuvchi qo'llanmasi | PCE asboblari
PCE Instruments tomonidan ishlab chiqarilgan PCE-4XX-EKIT tashqi shovqin o'lchagich to'plami uchun foydalanuvchi qo'llanmasi. Ushbu atrof-muhit shovqinini kuzatish uskunasi uchun xavfsizlik, kirish, yetkazib berish tarkibi, texnik xususiyatlar, qurilma tavsifi, tizimni sozlash, batareyani qayta zaryadlash, kafolat, yo'q qilish va aloqa ma'lumotlari haqida batafsil ma'lumot beradi.
Oldindanview PCE Instruments tovush darajasi o'lchagichlari katalogi va texnik xususiyatlari
PCE Instruments-ning tovush darajasi o'lchagichlari, akustik kalibratorlari va tegishli aksessuarlari, jumladan, texnik xususiyatlari, xususiyatlari va sanoat va professional foydalanish uchun ilovalari haqida batafsil ma'lumot beruvchi keng qamrovli katalog.
Oldindanview PCE-VT 3800/3900 tebranish o'lchagich foydalanuvchi qo'llanmasi
PCE Instruments PCE-VT 3800 va PCE-VT 3900 tebranish o'lchagichlari uchun foydalanuvchi qo'llanmasi. Mashina holatini samarali kuzatish uchun batafsil spetsifikatsiyalar, ishlash, o'lchash rejimlari, ma'lumotlar jurnali, FFT, RPM, marshrut o'lchovlari, xavfsizlik va kalibrlashni o'z ichiga oladi.
Oldindanview PCE-UX 3081/3081WQ namlik analizatori: foydalanish bo'yicha ko'rsatmalar va texnik qo'llanma
PCE-UX 3081 va PCE-UX 3081WQ namlik analizatorlari uchun keng qamrovli foydalanish ko'rsatmalari va texnik tavsiflari. Termogravimetrik usullardan foydalangan holda namlik va quruq moddalarni aniq tahlil qilish uchun sozlash, ishlatish, xavfsizlik, texnik xizmat ko'rsatish va muammolarni bartaraf etish haqida bilib oling.
Oldindanview PCE Instruments PCE-428/430/432 Hlyukoměr: Funkcelarni o'chirib qo'yish
Podrobny návod k obsluze pro hlukoměry PCE Instruments PCE-428, PCE-430 va PCE-432. Zjistěte více o funkcích, technických údajích, kalibraci a obsluze těchto přesných měřicích přístrojů.