Audio System CO-600.5 High-Performance 5-Channel Class A/B AmpFoydalanuvchi uchun qo'llanma

1. Kirish

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Audio System CO-600.5 High-Performance 5-Channel Class A/B Amplifier. To ensure optimal performance and safety, please read this manual thoroughly before using the product and retain it for future reference.

2. Xavfsizlik ma'lumotlari

General Product Safety according to EU Regulation 2023/2028:

• Observe the manufacturer's instructions and operating instructions for switching off the power supply to the vehicle and in the retrofit products.
• The supply line to the retrofit product must not be longer than 30cm from the operating battery.
• Fasten retrofit devices and accessories properly.
• It is recommended that the retrofit devices/accessories be installed by a specialist workshop. Otherwise, product or vehicle damage and fire can occur.

Always disconnect the vehicle's battery before performing any installation or maintenance work to prevent electrical shock or damage.

3. Mahsulot tugadiview

The Audio System CO-600.5 is a high-performance 5-channel Class A/B amplifier designed for car audio systems. It features switchable High-Pass (HP) and Low-Pass (LP) filters, a full active mode, and includes a wired RTC remote control for convenient adjustments. The amplifier supports an input sensitivity range of 0.2V to 6V and includes a high-level RCA input with automatic turn-on capability.

Asosiy xususiyatlar:

• 5-Channel Class A/B Amphayotiyroq
• Switchable High-Pass (HP) and Low-Pass (LP) Filters
• Full Active Mode
• Wired RTC Remote Control Included
• Input Sensitivity: 0.2V - 6V
• High-Level RCA Input with Auto-On
• Power Output: 4 x 60W RMS (4 Ohm) / 4 x 85W RMS (2 Ohm) and 1 x 250W RMS (4 Ohm mono) / 1 x 350W RMS (2 Ohm mono)

Mahsulot Views

3.1-rasm: Yuqori view of the CO-600.5 amplifier, highlighting its sleek design and branding.

3.2-rasm: Old view ning amplifier, displaying the cooling fins.

3.3-rasm: orqa view ning amplifier, detailing the power input (GND, REM, +12V) and speaker output terminals.

Figure 3.4: Input and control panel, featuring RCA inputs, gain level adjustments, and crossover frequency controls.

3.5-rasm: Burchakli view providing a comprehensive look at both connection sides of the amphayotiyroq.

4. O'rnatish va o'rnatish

To'g'ri o'rnatish sizning ishlashingiz va uzoq umr ko'rish uchun juda muhimdir amplifier. It is highly recommended that installation be performed by a qualified professional.

4.1 O'rnatish joyi

• Quruq, yaxshi shamollatiladigan joyni tanlang, to'g'ridan-to'g'ri quyosh nuri va issiqlik manbalaridan uzoqroqda.
• Atrofda yetarli havo oqimini ta'minlang amplifier for proper cooling.
• ni o'rnating amplifier securely to a solid surface using appropriate hardware to prevent movement during vehicle operation.

4.2 Simli ulanishlar

Har qanday ulanishni amalga oshirishdan oldin, avtomobilning salbiy batareya terminalini ajratib oling.

• Quvvat (BATT+): Connect a fused power cable directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Ensure the fuse is located within 30cm of the battery.
• Yer (GND): Connect a ground cable of the same gauge as the power cable to a clean, unpainted metal surface on the vehicle chassis. The connection point must be free of rust and paint.
• Masofaviy (REM): Bosh qurilmangizning masofadan boshqarish pultidan masofadan boshqarish simini qurilmadagi REM terminaliga ulang amplifier. This will turn the ampbosh blokingiz bilan ko'targichni yoqing va o'chiring.
• RCA kirishlari: Bosh qurilmangizning RCA chiqishlarini ulang amplifier's RCA inputs (CH1/2, CH3/4, SUB IN).
• Dinamik chiqishlari: Connect your speakers to the corresponding speaker output terminals (CH1, CH2, CH3, CH4, SUBWOOFER). Observe correct polarity (+ to + and - to -).

5. Foydalanish bo'yicha ko'rsatmalar

Bir marta amplifier is correctly installed and wired, you can proceed with initial setup and operation.

5.1 Dastlabki yoqish

• Avtomobilning salbiy batareya terminalini qayta ulang.
• Bosh qurilmangizni yoqing. The amplifier should power on automatically via the remote wire. The power indicator LED on the amplifier should illuminate.

5.2 Gain Level Adjustment

The gain control (LEVEL) matches the amplifier's input sensitivity to the output of your head unit. This is not a volume control.

• ni o'rnating amplifier's gain control to minimum (fully counter-clockwise).
• Bosh qurilmangizning ovoz balandligini maksimal darajadan taxminan 75-80% ga sozlang.
• Sekin -asta oshiring amplifier's gain control until you hear slight distortion, then back it off slightly until the sound is clear.

5.3 Crossover Settings (X-OVER)

The CO-600.5 features switchable HP (High-Pass) and LP (Low-Pass) filters for precise sound tuning.

• HPF (Yuqori o'tish filtri): Allows frequencies above the set point to pass through. Use for full-range speakers to prevent low frequencies that can cause distortion.
• LPF (past o'tish filtri): Allows frequencies below the set point to pass through. Use for subwoofers to prevent high frequencies.
• Adjust the crossover frequencies (e.g., 50Hz-250Hz for HPF, 30Hz-250Hz for LPF) according to your speaker specifications and listening preferences.

5.4 RTC Remote Control

The included wired RTC remote control allows for convenient adjustment of the subwoofer level from the driver's seat.

6. Xizmat ko'rsatish

The Audio System CO-600.5 ampliifier minimal parvarishlashni talab qiladi.

• ni saqlang ampko'targich toza va changsiz. Tozalash uchun yumshoq, quruq matodan foydalaning.
• Barcha ulanishlar xavfsiz ekanligiga ishonch hosil qiling. Simlarning aşınma yoki korroziya belgilari bor-yo'qligini vaqti-vaqti bilan tekshirib turing.
• Do not use harsh chemicals or abrasive cleaners on the amphayotiyroq.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Agar siz bilan bog'liq muammolar mavjud bo'lsa ampliifier uchun quyidagi umumiy muammolar va echimlarga murojaat qiling:

If the problem persists after attempting these solutions, please contact Audio System customer support or a qualified car audio technician.

8. Texnik shartlar

9. Kafolat va qo'llab-quvvatlash

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Audio System dealer. Warranty terms and conditions may vary by region and retailer.

For technical support, service, or inquiries regarding spare parts, please contact Audio System customer service directly or visit their official website. Contact information is typically available on the product packaging or the manufacturer's websayt.

Ishlab chiqaruvchi: Audio tizimi

Ishlab chiqaruvchi manzili: JRS Labs - The Art of Sound, Heinrich-Heine-Straße 13A, 63329 Rödermark