Reloop RP-4000 MK2 Professional yuqori momentli aylanuvchi patnis tizimi foydalanuvchi qo'llanmasi

Kirish

This manual provides detailed instructions for the setup, operation, and maintenance of your Reloop RP-4000 MK2 Professional High Torque Turntable System. The RP-4000 MK2 is designed for advanced users, featuring a robust direct-drive motor, precise pitch control, and a statically balanced S-shaped tonearm. Please read this manual thoroughly before using the turntable to ensure proper function and longevity.

Rasm: burchakli view of the Reloop RP-4000 MK2 turntable, showcasing its main components and sleek black design.

Qutida nima bor

Barcha komponentlarni ehtiyotkorlik bilan oching va quyidagi elementlar mavjudligiga ishonch hosil qiling:

• Pikap stolchasi
• OM Black pick-up system (by Ortofon)
• Bosh po'stlog'i
• Slipmat
• Qarama-qarshi vazn
• Quvvat kabeli
• Qo'llanma (bu hujjat)

Sozlash; o'rnatish

Follow these steps to set up your RP-4000 MK2 turntable:

1. Joylashtirish: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration. Ensure adequate ventilation.
2. Plastinani o'rnatish: Carefully place the turntable platter onto the center spindle. Ensure it sits flush and rotates freely.
3. Slipmat Placement: Place the included slipmat on top of the platter.
4. Headshell and Cartridge Attachment: Attach the OM Black pick-up system (pre-mounted on the headshell) to the S-shaped tonearm. Secure it by rotating the locking ring clockwise.
5. Counterweight Adjustment: Slide the counterweight onto the rear of the tonearm. Rotate it until the tonearm is balanced horizontally (floating freely). Then, set the tracking force according to the cartridge manufacturer's specifications (typically 2-4 grams for DJ cartridges).
6. Konkiga qarshi sozlash: Adjust the anti-skating dial to match the tracking force. This prevents the stylus from skipping inwards.
7. Ulanishlar:
   • Connect the RCA audio cables from the turntable to the PHONO input of your mixer or amphayotiyroq. Eslatma: This turntable does not have a built-in pre-amplifier. A PHONO input or an external pre-ampko'taruvchi talab qilinadi.
   • Connect the ground wire from the turntable to the ground terminal on your mixer or amplifier to minimize hum.
   • Connect the power cord to the turntable and then to a suitable power outlet.

Rasm: yuqoridan pastga view of the Reloop RP-4000 MK2 turntable, illustrating the layout of the platter, tonearm, and controls for initial setup.

Rasm: batafsil view of the S-shaped tonearm and attached headshell with the OM Black cartridge, crucial for proper setup and tracking.

Rasm: yon view of the turntable's rear, highlighting the power input and audio output connections for proper wiring.

Foydalanish bo'yicha ko'rsatmalar

Once set up, operate your turntable using the following guidelines:

1. Quvvatni yoqish/oʻchirish: Rotate the START/STOP knob clockwise to power on the turntable. The platter will begin to rotate. Rotate counter-clockwise to power off.
2. Tezlikni tanlash: Use the SPEED buttons (33, 45, 78) to select the desired playback speed for your vinyl record. The corresponding LED will illuminate.
3. Ohang nazorati: The pitch fader allows for fine adjustment of the playback speed. The 8%/16% button toggles between a +/-8% and +/-16% pitch range. The RESET button instantly returns the pitch to 0%.
4. Reverse Play: Press the REVERSE button to play the record in reverse. Press it again to return to forward play.
5. Tonearm Operation:
   • Use the tonearm lift lever to raise and lower the tonearm gently.
   • Manually position the tonearm over the desired groove on the record.
   • Lower the tonearm using the lift lever to begin playback.
6. Maqsadli yorug'lik: The aluminum target light can be extended by pressing it, illuminating the needle position in low-light environments.

Image: Close-up of the Reloop RP-4000 MK2's control panel, showing the pitch fader, speed buttons, reverse button, and pitch reset button.

Xususiyatlari

• High Torque Direct Drive Motor: Ensures stable rotation and quick start/stop times, suitable for DJ applications.
• S-Shaped Tonearm: Statically balanced design provides precise tracking and minimizes distortion.
• Adjustable Pitch Control: Offers +/-8% and +/-16% ranges for accurate beatmatching and tempo adjustments.
• Reverse Play Function: Allows for creative playback options.
• Illuminated Target Light: Retractable light for improved visibility of the stylus in dark environments.
• Kuchli qurilish: Features a deep black metallic top panel and shock-absorbing feet for improved isolation from vibrations.

Xizmat

Regular maintenance ensures optimal performance and extends the life of your turntable:

• Stylusni tozalash: Gently clean the stylus with a soft brush designed for this purpose, moving from back to front. Avoid touching the stylus with your fingers.
• Yozuvlarni tozalash: Use a carbon fiber brush or a record cleaning solution to keep your vinyl records free of dust and debris.
• Turntable Chassis: Wipe the turntable's surface with a soft, dry, lint-free cloth. Avoid abrasive cleaners or solvents.
• Chang qoplami: If using an optional dust cover, keep it clean and in place when the turntable is not in use to protect against dust accumulation.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Muammolarga duch kelsangiz, quyidagi umumiy muammolar va echimlarga murojaat qiling:

Texnik xususiyatlari

Kafolat va qo'llab-quvvatlash

For warranty information and technical support, please refer to the official Reloop website or contact your authorized Reloop dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

Qo'shimcha manbalar va mahsulot haqida ma'lumot olish uchun tashrif buyurishingiz mumkin Reloop Store on Amazon.