AVANTEK CB-12 Mini simsiz eshik qo'ng'irog'i uchun qo'llanma

Kirish

Welcome to the AVANTEK CB-12 Mini Wireless Doorbell. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your device. Please read this manual thoroughly before use.

Paket tarkibi

• 1 x Transmitter (Push Button)
• 2 ta ulanadigan qabul qilgich
• 1 x yopishqoq lenta
• 2 x vintlardek
• 2 x langar
• 1 x Tornavida
• 1 x foydalanuvchi qo'llanmasi (ushbu hujjat)
• 1 x CR2 batareyasi (uzatgichga oldindan o'rnatilgan)

Mahsulot tugadiview

The AVANTEK CB-12 system consists of a waterproof push-button transmitter and two plug-in receivers. Each component features an LED indicator for visual alerts.

Image: The AVANTEK CB-12 wireless doorbell system, showing two black plug-in receivers and one black push-button transmitter. All units have a green LED indicator and a bell icon.

Transmitter (Push Button) Features:

• IP55 Dustproof and Waterproof rating.
• Operating temperature: -4 °F to 140 °F (-20 °C to 60 °C).
• Ultra-low power consumption with a 3-year maximum battery lifespan.

Qabul qiluvchining xususiyatlari:

• Plagin dizayni.
• 52 selectable melodies.
• 5 adjustable volume levels (up to 115 dB).
• LED flash indicator.
• Memory function for last melody and volume setting.

O'rnatish va o'rnatish

1. Transmitterni o'rnatish:

Choose a suitable location for the transmitter, such as near your front door. Ensure the surface is clean and dry.

Image: A diagram illustrating two methods for installing the doorbell transmitter: using double-sided adhesive tape or using screws and anchors. The adhesive method shows applying the tape to the back of the transmitter and pressing it onto a surface. The screw method shows opening the transmitter, marking drill points, drilling, inserting anchors, and screwing the back plate to the wall before reattaching the front.

1. Method A: Using Adhesive Tape
   • O'rnatish joyini yaxshilab tozalang.
   • Peel off one side of the adhesive tape and attach it to the back of the transmitter.
   • Peel off the other side of the tape and firmly press the transmitter onto the desired surface for at least 30 seconds.
2. Method B: Using Screws and Anchors
   • Open the transmitter casing using the provided screwdriver.
   • Mark the positions for drilling holes on the wall using the back plate as a template.
   • Ikkita teshik oching va langarlarni joylashtiring.
   • Secure the back plate to the wall with the screws.
   • Reattach the front part of the transmitter to the secured back plate.

2. Receiver Installation:

Plug the receivers into standard electrical outlets in locations where you want to hear the doorbell chime. The 1000 ft (300 m) wireless range allows for flexible placement throughout your home.

Image: An illustration depicting a house with a doorbell transmitter outside and a receiver plugged into an indoor wall outlet, demonstrating the 1000 ft (300 m) wireless range of the system.

Foydalanish bo'yicha ko'rsatmalar

1. Pairing the Transmitter and Receiver:

The transmitter and receivers are pre-paired at the factory. If re-pairing is needed or if you add new components:

1. Qabul qilgichni rozetkaga ulang.
2. Press and hold the volume button on the receiver for 5 seconds until the LED indicator flashes rapidly. This indicates pairing mode.
3. Immediately press the transmitter (push button). The receiver will chime and the LED will flash slowly, indicating successful pairing.
4. If pairing multiple transmitters, repeat the process for each one.

2. Changing Melodies:

The receiver offers 52 different melodies.

Image: A close-up of the AVANTEK doorbell receiver plugged into a wall outlet, with icons indicating 52 chimes and tunes, 5 volume levels, and an LED indicator. This image visually represents the customization options for the chime.

• Press the "Next" or "Previous" button on the side of the receiver to cycle through the available melodies.
• Once you hear a melody you like, stop pressing the buttons. The receiver will remember this selection.

3. Ovoz balandligini sozlash:

There are 5 adjustable volume levels, from silent (0 dB) to a maximum of 115 dB.

Image: A visual representation of the doorbell receiver's mute mode, showing a sleeping baby next to the receiver, emphasizing silent operation.

• Press the "Volume" button on the side of the receiver to cycle through the 5 volume levels.
• The lowest setting is mute (0 dB), indicated by a mute icon.

4. Xotira funktsiyasi:

The receiver retains your last selected melody and volume level even after a power outage, qayta konfiguratsiya qilish zaruratini bartaraf etish.

Xizmat

1. Battery Replacement (Transmitter):

The transmitter uses a CR2 battery with an estimated lifespan of 3 years. When the LED indicator on the transmitter no longer lights up or the range decreases significantly, it's time to replace the battery.

• Open the transmitter casing using the provided screwdriver.
• Eski CR2 batareyasini ehtiyotkorlik bilan chiqarib oling.
• To'g'ri qutblanishni ta'minlab, yangi CR2 batareyasini joylashtiring.
• c ni yopingasing xavfsiz.

2. Tozalash:

Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Texnik xususiyatlari

• Model: LD-CB-12-A
• Simsiz diapazoni: Up to 1000 ft (300 m) in open air
• Ohanglar: 52 selectable chimes
• Ovoz darajasi: 5 (0 dB to 115 dB)
• Transmitter batareyasi: 1 x CR2 (included), 3-year lifespan
• Transmitterning suv o'tkazmaydigan reytingi: IP55
• Ishlash harorati: -4 °F dan 140 °F gacha (-20 °C dan 60 °C gacha)
• Quvvat manbai: AC va batareya
• Material: ABS
• O'lchamlari (uzatuvchi): 2.8 x 0.6 x 3.1 dyuym
• Olchamlari (qabul qiluvchi): 2.87 x 0.6 x 3.15 inches (approximate, based on visual data)
• jildtage: 3 Volts (Transmitter)

Kafolat va qo'llab-quvvatlash

AVANTEK provides customer service for its products. For support or warranty inquiries, please refer to the contact information provided with your purchase or visit the official AVANTEK websayt.

This product is approved by FCC, CE, and RoHS standards.