CONTEC CMS50NA

CONTEC CMS50NA puls oksimetr foydalanuvchi uchun qo'llanma

Model: CMS50NA | Brand: CONTEC

1. Kirish

The CONTEC CMS50NA Pulse Oximeter is a portable device designed for non-invasive spot-check measurement of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. It is intended for sports and aviation use only and is not a medical device. This manual provides essential information for the safe and effective operation of the device.

Muhim eslatma: This product is intended for sports and aviation use only. It is not a medical device and should not be used for diagnosis or treatment of any medical condition.

2. Nimalar kiradi

Paketni ochgandan so'ng, barcha komponentlar mavjudligiga ishonch hosil qiling:

  • CONTEC CMS50NA Pulse Oximeter (1 unit)
  • Handy Carry Pouch (1 unit)
  • 1.5V AAA Alkaline Batteries (2 units)
  • Long Lanyard (Neck/Wrist Cord) (1 unit)
  • Foydalanuvchi qo'llanmasi (1 birlik)
Contents of CONTEC CMS50NA Pulse Oximeter package

Image: All items included in the CONTEC CMS50NA Pulse Oximeter package, including the oximeter, carry pouch, batteries, lanyard, and user manual.

3. Sozlash

3.1 Batareyani o'rnatish

  1. Open the battery cover on the back of the device by sliding it downwards.
  2. Insert two 1.5V AAA alkaline batteries into the battery compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
  3. Batareya qopqog'ini mahkam chertilguncha joyiga surib yoping.
Battery compartment of CONTEC CMS50NA Pulse Oximeter

Image: The open battery compartment of the pulse oximeter, showing where to insert the two AAA batteries.

3.2 Bog'ichni mahkamlash

  1. Thread the thinner end of the lanyard through the lanyard loop hole located on the side of the oximeter.
  2. Pass the thicker end of the lanyard through the looped thinner end and pull gently to secure.
Steps to attach lanyard to CONTEC CMS50NA Pulse Oximeter

Image: A visual guide demonstrating the three steps to correctly attach the neck/wrist lanyard to the pulse oximeter.

4. Foydalanish bo'yicha ko'rsatmalar

4.1 O'lchovni o'tkazish

  1. Pulse oksimetr klipini oching.
  2. Insert one of your fingers (preferably the index or middle finger) into the rubber opening of the oximeter, ensuring it is placed correctly.
  3. Press the power button on the top of the device.
  4. Keep your hand still and avoid shaking during the measurement process.
  5. The SpO2 and Pulse Rate values will appear on the display within a few seconds.
Steps for taking a measurement with CONTEC CMS50NA Pulse Oximeter

Image: A three-step visual guide showing how to open the clip, insert a finger, and press the power button to take a measurement.

4.2 Displeyni tushunish

The bright TFT display shows the following information:

  • SpO2: Blood Oxygen Saturation Level (displayed as a percentagva).
  • PRbpm: Pulse Rate (displayed in beats per minute).
  • Pulse Rate Waveform: A graphical representation of your pulse.
  • Pulse Bar Graph: A vertical bar graph indicating pulse intensity.
  • Batareya ko'rsatkichi: Qolgan batareyaning ishlash muddatini ko'rsatadi.
CONTEC CMS50NA Pulse Oximeter display features

Image: The pulse oximeter display showing SpO2 and PRbpm readings, along with the pulse waveform and bar graph.

4.3 Display Orientation

The device features a rotatable multi-directional display. The display orientation automatically adjusts based on how the device is held, ensuring easy readability from various angles.

Rotatable display of CONTEC CMS50NA Pulse Oximeter

Image: The pulse oximeter display shown in different orientations, demonstrating its rotatable feature for easy viewing.

4.4 Avtomatik o'chirish

The device will automatically power off after 5 seconds of inactivity or when the finger is removed from the sensor.

5. Xizmat ko'rsatish

5.1 Qurilmani tozalash

  • Clean the surface of the oximeter with a soft cloth damp70% izopropil spirti bilan.
  • Do not immerse the device in water or any cleaning solution.
  • Ensure the device is completely dry before reuse.

5.2 Batareyani almashtirish

Replace batteries when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.

5.3 Saqlash

Store the pulse oximeter in its handy carry pouch in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

MuammoMumkin sababYechim
Yoqilgandan keyin displey yo'q.Batareyalar o'lik yoki noto'g'ri o'rnatilgan.Replace batteries or re-install them correctly, ensuring polarity.
SpO2 and PR values are unstable.Finger not inserted properly, patient movement, or cold hands.Re-insert finger, remain still, or warm hands before measurement. Ensure no nail polish.
"Finger Out" message displayed.Finger not detected or removed.Ensure finger is fully inserted into the sensor.
Displey xira.Low battery or screen protective film still on.Replace batteries. Remove the thin protective film from the screen.

7. Texnik shartlar

  • Model nomi: CMS50NA
  • Mahsulot o'lchamlari: 2.24 x 1.34 x 1.22 dyuym
  • Og'irligi: 3.21 untsiya (batareyalar bilan)
  • Quvvat talablari: 2 x 1.5V AAA ishqoriy batareyalar
  • Batareya muddati: Approximately 20-30 hours of continuous operation
  • Displey turi: TFT displey
  • SpO2 o'lchash diapazoni: 0% - 100%
  • Pulse tezligini o'lchash diapazoni: 30 bpm - 250 bpm
  • Avtomatik o'chirish: 5 soniya harakatsizlikdan keyin
  • Ishlab chiqaruvchi: Contec Medical Systems Co., Ltd.

8. Kafolat va qo'llab-quvvatlash

For warranty information and customer support, please refer to the official CONTEC websaytiga kiring yoki sotuvchingizga murojaat qiling. Xarid chekingizni sotib olinganligini tasdiqlovchi hujjat sifatida saqlang.

Huquqiy rad etish: This product is intended for sports and aviation use only. We are the direct manufacturer, there is a clear screen protector which can be removed before use.

Qo'shimcha manbalar uchun siz quyidagilarga murojaat qilishingiz mumkin Rasmiy foydalanuvchi qo'llanmasi (PDF).

9. Rasmiy mahsulot videolari

How to take measurements with CONTEC50NA pulse oximeter?

Video: An official demonstration by Contec Medical Systems Co., Ltd. showing the correct procedure for taking measurements with the CMS50NA pulse oximeter.