SINOTIMER MC901-611 Universal Intelligent Temperature Control Meter User Manual

Brend: SINOTIMER

Model: MC901-611

1. Kirish

The SINOTIMER MC901-611 is a universal intelligent temperature control meter designed for precise temperature regulation in various industrial and laboratory applications. This device features a clear LCD display, multiple input types, and reliable output options, making it suitable for a wide range of temperature control needs. This manual provides essential information for the safe and effective operation, installation, and maintenance of your MC901-611 temperature controller.

2. Xavfsizlik ma'lumotlari

Please read this manual thoroughly before operating the device to ensure safe and correct usage. Keep this manual for future reference.

Umumiy xavfsizlik choralari:

Elektr ta'minoti voltage matches the specifications of the device (100-240V AC, 50/60Hz).
Do not operate the device in environments with excessive dust, humidity, corrosive gases, or strong vibrations.
Disconnect power before performing any wiring, maintenance, or inspection.
O'rnatish va simlarni ulashni faqat malakali xodimlar bajarishi kerak.
Avoid touching internal components when the device is powered on.
Elektr toki urishining oldini olish uchun to'g'ri erga ulashni ta'minlang.
Qurilmani qismlarga ajratmang yoki o'zgartirmang. Ruxsatsiz o'zgartirishlar kafolatni bekor qilishi va xavfsizlik uchun xavf tug'dirishi mumkin.

3. Mahsulot tugadiview

The MC901-611 temperature controller features a compact design with a clear digital display and intuitive control buttons.

Old view of the SINOTIMER MC901-611 temperature controller showing the PV and SV displays, indicator lights, and control buttons.

3.1-rasm: Old panel
This image displays the front panel of the MC901-611. It features two digital displays: PV (Process Value) in red, showing the current temperature, and SV (Set Value) in green, showing the target temperature. Below the displays are indicator lights for OUT (Output), AT (Auto-tuning), ALM1 (Alarm 1), and ALM2 (Alarm 2). The control buttons include SET, R/S (Run/Stop), Down arrow, and Up arrow.

Asosiy komponentlar:

PV displey: Shows the current measured temperature (Process Value).
SV displey: Shows the set target temperature (Set Value).
Ko'rsatkich chiroqlari: OUT (Output status), AT (Auto-tuning status), ALM1 (Alarm 1 status), ALM2 (Alarm 2 status).
Boshqarish tugmalari: SET (Enter/Confirm settings), R/S (Run/Stop), Up/Down arrows (Adjust values).
Terminal bloki: Located at the rear for electrical connections.
O'rnatish qavslari: For secure panel installation.

Yon view of the SINOTIMER MC901-611 temperature controller showing the product label with specifications.

Figure 3.2: Side Panel with Specifications Label
This image shows the side of the MC901-611, highlighting the product label. The label provides crucial information such as Model (MC901-611), Input type (K, default setting), Temperature Range (0-1300°C), Temperature Unit (Celsius/Fahrenheit), Output type (Relay/SSR), Alarm (ALM1), Accuracy Class (0.5), and Power Supply (100-240V AC, 50/60Hz).

Orqa view of the SINOTIMER MC901-611 temperature controller showing the wiring terminal block.

Figure 3.3: Rear Panel with Terminal Block
This image displays the rear of the MC901-611, featuring the terminal block for electrical connections. The terminals are clearly numbered, indicating where to connect power, sensor inputs, and control outputs. Proper wiring according to the provided diagram is essential for safe and correct operation.

4. O'rnatish va o'rnatish

4.1 Panel Mounting:

The MC901-611 is designed for panel mounting. Ensure the cutout dimensions in your panel match the device's specifications.

Cut an opening in your panel according to the specified dimensions (refer to specifications section for exact size).
Insert the MC901-611 into the panel cutout from the front.
Attach the provided mounting brackets to the sides of the controller from the rear of the panel.
Tighten the screws on the mounting brackets to secure the controller firmly in place. Do not overtighten.

Two black mounting brackets with screws for securing the temperature controller to a panel.

4.1-rasm: O'rnatish qavslari
This image shows the two mounting brackets included with the MC901-611. These brackets are used to secure the temperature controller firmly within a panel cutout, ensuring stable installation.

4.2 Ulanish diagrammasi:

Refer to the wiring diagram on the side of the unit or in the detailed manual for correct connections. Ensure all connections are secure and insulated.

Quvvatlantirish manbai: Connect the main power supply (100-240V AC, 50/60Hz) to the designated terminals.
Sensorli kirish: Connect your temperature sensor (e.g., K-type thermocouple) to the sensor input terminals. Ensure correct polarity for thermocouples.
Nazorat chiqishi: Connect your heating/cooling element or SSR to the control output terminals.
Alarm Output (Optional): If using alarm functions, connect external alarm devices to the alarm output terminals.

Note: A detailed wiring diagram is typically provided on the physical unit or in a separate wiring guide. Always consult the specific diagram for your model.

5. Foydalanish bo'yicha ko'rsatmalar

5.1 Quvvatni yoqish:

Once wired correctly, apply power to the unit. The PV display will show the current temperature, and the SV display will show the last set temperature.

5.2 Setting the Target Temperature (SV):

ni bosing SET button once. The SV display will start flashing.
dan foydalaning Up (▲) va Pastga (▼) arrow buttons to adjust the target temperature.
ni bosing SET button again to confirm the new SV and exit the setting mode. The SV display will stop flashing.

5.3 Parametr sozlamalari:

To access advanced parameter settings (e.g., input type, control mode, alarm settings):

ni bosing va ushlab turing SET button for approximately 3-5 seconds until the first parameter code appears on the PV display.
dan foydalaning Up (▲) va Pastga (▼) arrow buttons to navigate through different parameter codes.
bosing SET uchun view the value of the currently displayed parameter.
dan foydalaning Up (▲) va Pastga (▼) arrow buttons to change the parameter value.
bosing SET to confirm the new value and return to the parameter code display.
To exit parameter setting mode, press and hold the SET button again for 3-5 seconds, or wait for the device to automatically exit after a period of inactivity.

Consult the full product manual for a complete list of parameter codes and their functions.

5.4 Auto-tuning (AT):

Auto-tuning helps the controller optimize its PID parameters for stable and accurate temperature control. This process is recommended after initial setup or if control performance is unsatisfactory.

Set the desired target temperature (SV).
ni bosing va ushlab turing R/S button for approximately 3-5 seconds. The AT indicator light will illuminate, and the controller will begin the auto-tuning process.
Allow the auto-tuning process to complete. This may take some time as the controller cycles the output to learn the system's characteristics. The AT light will turn off once tuning is complete.
Do not interrupt the auto-tuning process.

6. Xizmat ko'rsatish

Regular maintenance ensures the longevity and optimal performance of your MC901-611 temperature controller.

Tozalash: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the unit. Do not use abrasive cleaners, solvents, or water, as these can damage the display or internal components.
Tekshirish: Periodically check all wiring connections for looseness or damage. Ensure the terminal screws are tight.
Atrof-muhit: Zararni oldini olish uchun ish muhiti belgilangan harorat va namlik oralig'ida qolishiga ishonch hosil qiling.
Sensorni tekshirish: If temperature readings appear inaccurate, check the sensor and its wiring for damage or corrosion.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

This section addresses common issues you might encounter with your MC901-611 temperature controller.

Muammo	Mumkin sabab	Yechim
Displey yo'q/Quvvat o'chirilgan	No power supply; Loose wiring; Blown fuse.	Check power connection; Verify wiring; Replace fuse if necessary (by qualified personnel).
PV display shows "HHHH" or "LLLL"	Sensor open circuit (HHHH); Sensor short circuit or reverse connection (LLLL); Sensor type mismatch.	Check sensor wiring and connections; Ensure correct sensor type is selected in parameters.
Temperature not controlled accurately	Incorrect PID parameters; Sensor not properly installed; Load capacity mismatch.	Perform auto-tuning; Ensure sensor is in good thermal contact with the process; Verify output capacity matches load.
Output indicator (OUT) not lighting up	SV is equal to PV (no control action needed); Output wiring issue; Internal fault.	Check SV and PV values; Inspect output wiring; If problem persists, contact support.

Agar ushbu echimlarni sinab ko'rganingizdan keyin muammo davom etsa, mijozlarni qo'llab-quvvatlash xizmatiga murojaat qiling.

8. Texnik shartlar

Technical specifications for the SINOTIMER MC901-611 Universal Intelligent Temperature Control Meter.

Xususiyat	Spetsifikatsiya
Model	MC901-611
Kirish turi	K (default setting), Universal Input
Harorat diapazoni	0-1300°C (depending on sensor type)
Harorat birligi	Celsius/Fahrenheit selectable
Chiqish turi	Relay/SSR
Signal	ALM1
Aniqlik klassi	0.5
Quvvatlantirish manbai	100-240V AC, 50/60Hz
Displey turi	LCD
Element og'irligi	8.8 untsiya
Paket o'lchamlari	4.3 x 4.3 x 3.6 dyuym

9. Kafolat va qo'llab-quvvatlash

Kafolat haqida ma'lumot:

SINOTIMER products are typically covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or contact SINOTIMER customer service for specific warranty terms and conditions.

Mijozlarni qo‘llab-quvvatlash:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact SINOTIMER customer support. Have your product model number (MC901-611) and purchase information ready when contacting support.

Contact information for SINOTIMER can usually be found on their official websayt yoki mahsulot o'ramida.

	SINOTIMER DDS6619 seriyali qo'llanma temir yo'l o'lchash kaliti bo'yicha qo'llanma SINOTIMER DDS6619 seriyali hidoyat relsli o'lchash kalitlari uchun qo'llanma. Batafsil texnik xususiyatlar, simlar, Smart Life/Tuya orqali ilovalarni boshqarish, foydalanish ko'rsatmalari va aqlli energiya monitoringi uchun xavfsizlik choralari.
	MC-101 Series Intelligent Temperature Controller foydalanuvchi qo'llanmasi MC-101 Series Intelligent Temperature Controller uchun foydalanuvchi qo'llanmasi, uning xususiyatlari, ishlashi va haroratni aniq nazorat qilish sozlamalari batafsil.
	SINOTIMER SVP719 foydalanuvchi qoʻllanmasi: jildtage Protector, Energiya hisoblagichi va Quvvat iste'moli monitori SINOTIMER SVP719 uchun keng qamrovli foydalanuvchi qo'llanmasi, uning xususiyatlari sozlanishi yuqori/past vol sifatida batafsil tavsiflangantage protektori, kuchlanishdan himoya qiluvchi, haddan tashqari oqim chegarasi relesi va quvvat sarfini kuzatish uchun vatt/kVt energiya hisoblagichi.
	Sinotimer MT-S PID harorat sozlagichi: xususiyatlar, texnik xususiyatlar va sozlash bo'yicha qo'llanma Sinotimer MT-S Intelligent PID haroratni nazorat qilish rölesi haqida batafsil ma'lumot, jumladan xususiyatlar, texnik xususiyatlar, ulanish sxemalari va PID va yoqish-o'chirishni boshqarish rejimlari uchun sozlash ko'rsatmalari.
	SINOTIMER WiFi Smart Switch Instruction Manual Comprehensive instruction manual for the SINOTIMER WiFi Smart Switch, detailing network setup via the Graffiti Smart APP, device unbinding and reset procedures, indicator light status, electricity consumption display, and configuration of overvoltagetage, and overcurrent protection settings.
	SINOTIMER STC-916W WIFI Smart Temperature Controller Instruction Manual Instruction manual for the SINOTIMER STC-916W WIFI Smart Temperature Controller Socket, detailing its features, operation, specifications, and app connectivity for temperature control.