1. Kirish
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.
2. Xavfsizlik ma'lumotlari
- O'rnatish va ishlatishdan oldin barcha ko'rsatmalarni diqqat bilan o'qing.
- Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
- Ensure the device is installed in a stable location to prevent accidental falls.
- Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
- Qurilmani bolalar qo'li etmaydigan joyda saqlang.
3. Paket tarkibi
Paketda barcha elementlar mavjudligiga ishonch hosil qiling:
- 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
- 1x o'rnatish ushlagichi
- 1x Set of Screws and Wall Plugs
- 1x Battery (Alkaline)
- 1x Quick Start Guide (this manual)
4. Mahsulot tugadiview
The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

1-rasm: Old view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.
Asosiy komponentlar:
- PIR Lens: Detects infrared radiation from moving bodies.
- LED ko'rsatkichi: Provides status feedback (e.g., detection, low battery).
- Batareya bo'limi: Quvvat manbasini joylashtiradi.
- O'rnatish nuqtalari: For secure installation on a wall.
- Tamper Switch: Triggers an alarm if the sensor cover is opened.
5. Sozlash
5.1. Batareyani o'rnatish
- Open the sensor's front cover by gently prying it open from the bottom notch.
- Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
- Close the front cover, ensuring it clicks securely into place.
5.2. Sensorni o'rnatish
The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.
- Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
- Devordagi vintlar o'rnini belgilash uchun shablon sifatida o'rnatish braketidan foydalaning.
- Belgilangan joylarda teshiklar burg'ulang va devorga o'rnatiladigan tiqinlarni joylashtiring.
- Taqdim etilgan vintlar yordamida devorga o'rnatish moslamasini mahkamlang.
- Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.
5.3. Pairing with a Security System
Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:
- Putting your security system into "pairing" or "enrollment" mode.
- Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
- Confirming successful pairing through the system's interface or LED indicators.
6. Sensorni boshqarish
6.1. Detection Principle
The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.
6.2. LED indikator holati
- Brief Flash: Harakatni aniqlashni bildiradi.
- Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
- Nur yo'q: Normal standby mode, or battery is completely depleted.
6.3. Detection Range and Coverage
The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.
7. Xizmat ko'rsatish
7.1. Tozalash
Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.
7.2. Batareyani almashtirish
When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.
7.3. Muntazam tekshiruvlar
Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.
8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Sensor harakatni aniqlamayapti. |
|
|
| Soxta signallar. |
|
|
| LED indicator flashing continuously. | Kam batareya. | Batareyani almashtiring. |
| Sensor not communicating with the security system. |
|
|
9. Texnik shartlar
- Brend: Intelbras
- Model: IVP2000SF
- Quvvat manbai: Batareya bilan ishlaydi
- Batareya turi: Ishqoriy
- O'rnatish turi: Devorga o'rnatish
- Mos qurilmalar: Intelbras security systems and smart home hubs
- Mahsulot o'lchamlari: Taxminan 17 x 10 x 9 sm (6.7 x 3.9 x 3.5 dyuym)
- Aniqlash usuli: Passiv infraqizil (PIR)
- Aniqlash diapazoni: 12 metrgacha (39 fut)
- Aniqlash burchagi: Taxminan 90 daraja
- Ishlash muhiti: Faqat ichki makonda foydalanish
10. Kafolat haqida ma'lumot
Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras websayti yoki mijozlarni qo'llab-quvvatlash xizmatiga murojaat qiling. Kafolat da'volari uchun xaridingizni tasdiqlovchi hujjatni saqlang.
11. Qo'llab-quvvatlash
If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:
- Websayt: Visit the official Intelbras webqo'llab-quvvatlash manbalari, tez-tez so'raladigan savollar va aloqa ma'lumotlari uchun sayt.
- Telefon: Refer to the contact section on the Intelbras webmahalliy qo'llab-quvvatlash raqamlari uchun sayt.





